Msfs2020 *G3000* Cessna longitude Climb out, Auto throttle & Vnav *IFR* Tutorial! Working title mod!
Vložit
- čas přidán 1. 11. 2021
- In this video we continue our journey in Microsoft flight simulator 2020 flying the Beautiful Cessna Longitude. We go over take off prep on the g3000 (working title edition) and go over setup of the auto throttle and how to engage it. Then the take off and up to 27000ft to start our Vnav arrival into Denver intl (KDEN). This is part 2 of the series of 3 videos and if you have not seen part one then I highly encourage you to do so there is a lot of info in than video about the setup of the cockpit and the programming of the g3000 and also we set up the Vnav for the arrival. Any questions please leave them below and please like and subscribe to the channel.
• Msfs2020 *G3000* ILS a... Part 3 of the series
• Msfs2020 *G3000* Cessn... Part 1 of the series
• Microsoft flight Simul... Video on how to install little navmap and the aircraft data
drive.google.com/file/d/1DjIS... Link to the flight plan for little navmap
• Basic Flight Plan * IF... Video on how to create a Ifr Flight plan on little navmap
• Flight Sim Basic STAR/... Tutorial on arrival charts
flightsim.to/file/3655/asobo-... Longitude fde fix Mod
flightsim.to/file/15569/msfs-... here is the link for the community downloader available on flightsim.to and is a great external application to use for many popular mods you can use this to get the G3000 from working title or go directly to the working title github and pick it up there here is a link to a video I did on getting it from their website
• MSFS2020 Working Title... and if you aren't sure on how to use the community downloader take a look at this video • Msfs2020 Organize your... . - Hry
I wish I could be as enthusiastic about anything, as you are in these videos. Thanks!
Ahhhh thank you for that means a lot I guess I am really passionate about this stuff lol I should have been born in an airplane ✈ 😅
@@2020fsers can totally relate to that :)
brilliant young man absolutley brilliant a good watch even if your not into msfs 2020
Hey there thank you so much for that 😊 I appreciate the comment
Great stuff 👏 and the funny humour additions added to the enjoyment in watching 😆
hey buddy how have you been ? glad to hear from you hope everyone is well over yonder .. Thanks for the comment glad you liked it !
Hi Jon, been a bit unwell past few days, but on the mend, probably a good thing as I haven't flown my sim for a while, frustrations with SU6 was driving me nuts
Yeah you really don't need those headaches. Stay positive once you get up to it then revisit the sim . Give my best to your better half don't give her any lip she will wakk ya lol jk
thanks, your video explained more about this aircraft in the first 90 seconds then other videos I've watched for 20 minutes...
Hey thanks so much im happy you enjoyed the video and got some good info 😊
HELP, I hope you can help. I only fly the longitude and have 200 hours. I set up the plane for take off with FD, vertical speed at about 2500, Nav, set alt for 10000 and arm auto throttle. The plane takes off beautifully. NOW with same setting it climbs at anywhere between 2500 and 9000, blows through alt, setting, basically uncontrollable, I have tried everything with no luck. If you have any suggestions I would be very grateful
@RickAnderson-sh1gf sounds like v/s is not activated after takeoff .
@@2020fsers that seems right, any ideas how to fix this? I just did a reinstall and same problem, thanks for your help
After takeoff make sure you hit the vs button and the vertical speed should populate on your autopilot annunciators on the g3000 PFD
Super, super presentation. Thanks very much for your expertise, time and generosity in sharing. Harvey
Thanks very much for the comment I really appreciate it I'm glad you enjoyed it
Hope you like part 3
Thanks so much.
Hey your welcome thanks for the comment 😀
Working title needs to get this Garman 3000 up and running. Inputting elevations at wave points is a sleeping thing. They should all be automatic. The CJ4 flies like a charm with enabled vnav
i agree the g1000 has the vnav enabled so the g3000 needs some love, on a complicated arrival setting all these altitudes can get arm bending lol and yes the cj4 is amazing i think people are a little apprehensive because the nav system looks like an airliner and the gps is different but it is by far leaps and bounds over the g3000 at the moment i will get into the cj4 soon can't wait. Thanks for watching and the comment
Thanks
Thanks Rick 😊 I appreciate the support .. 🙏
I also did an update to the longitude in a new 4 part series here is part 1
czcams.com/video/_tlM4hbLL6E/video.html
This is with all the updates to the aau.
HI. Excellent tutorial. How you manage to bring the Legs of the flight plan in the low part of the MCDU.
Hey thank you for the comment ok so to answer your question you can watch the 1st video and I go over the instruments and vnav it is time stamped czcams.com/video/EXHGn-jwzYs/video.html Or a shorter video is here czcams.com/video/TzftdRV4uvs/video.html
Question. Regarding descend via arrivals, while at cruise, can you not set the bottom altitude for the arrival and arm VNAV? That would eliminate the need to manipulate the VS manually. I’m not sure if this is a limitation of the software/program. Just comparing the procedure to the real aircraft.
Well yes you could do that in an aircraft that has an operational vnav 😆 I discussed this in the video as to why you must don it this way as well as input all of the altitude restrictions. Once working title gets working on this g3000 mod again hoping then will get the vnav correctly working the g1000nxi does work in the correct way.
I play with atc on to try making it as realistic as possible because I'm limited being on Xbox and if I start my decent before they tell me to all I'll get is "please expedite your climb flight level" (whatever I was cruising at) so my question is if I do similar to this will atc keep repeating what I previously said with the please expedite your climb flight level?
You can ask for a flight level change to a different altitude that's how I get around it .
@@2020fsers I just did my first flight with it and it went good actually, wish it was also available on the 787 and a320 as well.
How did you get the altitude numbers in your flight plan for the waypoints? If I enter a flight plan it does not provide the altitudes, I know how to add them, I just don't know how to get them
I get the altitudes from the charts skycevtor
Hi, I have a question. I know that the Cessna Citation Longitude is part of the Premium Deluxe Edition. Can it be bought separately? Unfortunately, I did not find a way to upgrade from my Standard edition to Premium Deluxe. There is a possibility in the game in the Marketplace, but I can't buy it there, it wants flight credits. Thank you very much for your answer. S!
Hey thanks for the comment so the short answer no you have to re buy the premium version I did the same bought the basic then had to buy again .
@@2020fsers thx mate 😞
Your welcome
Hi Thanks for Yr Tutorials. I Have the Longitude with WT 7.7 and FDE Fix. I set up the FP in game is that OK.? You set up the FP completely on the Plane. I use Navigraph Charts for checking details . Flying EGLL to EDDF. The Crse Alt in the in game 47,000 Ft. Can I change that on the plane to say 27,000Ft. How would that effect the out come. Also noticed that the Sqwak code self populates when the ATC gives You clearance. Any advise appreciated. Thank You.
Is there a Guide for the G3000 V7.7 available.
Hey thanks for the comment . Yes you can just input the flight plan in sim. Yes you can change the altitude if you like just go in and change the flight restriction altitude to the new alt. So if you use vnav it will calculate correctly but you do need to manually enter the altitudes. And yes unfortunately the sqwak code does auto populate if using the in sim atc. .hope this helps thanks again
@@2020fsers Hi Again, could You please advise. Have been flying the Longitude on several flights EGLL to EDDF No worry at all following Your Tutorials. In the last 24 Hrs I have the Plane doing a crash land as soon as I take off. Goes round in a circle and then out of control. Tried Removing and re isnatalling WT 3000 and also FDE Fix. No Luck. Any advise greatly appreciated.
Do you have the vfr map open from the toolbar?
@@2020fsers Problem solved. It was a sticky Yoke which resulted in the Plane going crazy!.
Good stuff glad you got it sorted
Can you explain your comment “because we’re using V/S and not FLC, we can now engage autothrottle”? So you cannot use autothrottle with FLC? I have always been taught that a good practice for any aircraft is to use FLC for climbs and V/S for descents, so just wondering how that works with autothrottle. Also, I have not been able to find a single video that talks about and actually demonstrates the TOGA function for takeoff, and I cannot get it to work when I try. I would like to use autothrottle from takeoff to right before touchdown but nobody seems to demonstrate that on CZcams…
To add to this comment, I am Xbox user only don’t have PC version and so also don’t have working title G3K mod. Just stock airplane with stock G3K cockpit…
Hey thanks for the comment. Ok so for reference I am using the fdefix mod and wt3000 so things may be different on stock version. Ok so yes you can use auto throttle while using flc . So when you set your auto throttle speed that will also be the flc speed . So after you set altitude and set auto throttle then hit the flc button climb appears on the top left of the pfd and the plane will climb and stay at the speed set in auto throttle to use as the flc speed. Hope this helps .
Ps I use flc on ascending and vs for descent .
@@2020fsers thanks helps a lot. And I guess toga doesn’t really matter it’s just as easy to manually push the thrust forward on my hotas then engage both autopilot and autothrottle shortly after takeoff during climb out. I just watched your entire tutorial series and although things are different because I don’t have the mods or any Vnav at all, it really helped a lot with the basics. Great channel I’m a new subscriber as well!
Thanks so much I appreciate the sub.
Does this tutorial series work without the Working Title mod? Playing on Xbox.
It does partially but the standard version of the g3000 is missing a lot of the features I go over so you will get the basics but not the more advanced features.
@@2020fsers Cool. I’m asuming the “active flight plan” is one of those advanced features.
taxiing like a delayed southwest flight... lmao
Lol thanks for the comment 😀
I cant beleave, the VNAV dosent work automatically when the TOD start. G1000 is automatically
Yep not yet they have been putting a lot of work into the g1000nxi so maybe in the near future we can expect it to be functional.
@@2020fsers Thank you. Your videos are awesome. I from Brazil and here people loves your tutorial
Thank you so much for the kind words really appreciate it 😊
Im John enjoyed your flight but I cannot get my g3000 installed. I drop the unzipped folder in my community folder and still see only default fms. Is this a purchase or the one I got from GitHub. Working title. Frustrating
Thx john
Ok try it this way using the community Downloader czcams.com/video/l5QPJAFW5fA/video.html
Hope this helps you . Thanks for the comment
@@2020fsers thank you that worked
Great to hear 👍you are very welcome
A good video, but the "funny" inserts, which are completely unnecessary, are very annoying. For some reason, Americans think that learning should be funny. Strange opinion.
Very old video and not up to date if you want a better video take a look at the newest longitude video. You will probably like the newest vids better.
czcams.com/video/_tlM4hbLL6E/video.html
@@2020fsers Thanks, I'll definitely take a look.
Ok cool I left out all the effects and should be easier to follow