Installation Huma High Flow Dual Hole FX transferport (How To) (2020)
Vložit
- čas přidán 22. 03. 2020
- With this Huma High Flow Dual Hole FX transferport you can enhance the airflow of your FX Impact, FX Dreamline or FX Crown, resulting is higher velocity without the loss of accuracy. The Huma High Flow Dual Hole FX transferport has a bigger hole with a bridge in the middle that prevents pellets or slugs falling in and smoothly guides them into the barrel. The larger hole allows more air to flow through, making for better performance.
We supply the Huma High Flow Dual Hole FX transferport for 5.5 mm (.22), 6.35 mm (.25) and 7.62 mm (.30). The smaller the calibre, the more airflow can be gained. For 5.5. mm for example it’s a staggering 48%.
In this video made by the team of Krale specialists, we’ll show you how to install the Huma High Flow Dual Hole FX transferport in a step by step tutorial. For this, we’ve taken an FX Impact right out of the box. We also tell you which tools and lubricants you’ll need, most of which are available at Krale.shop. Below, you’ll find a list of everything needed to install the Huma High Flow Dual Hole FX transferport, including links to our web shop.
Transfer Port Huma High Flow Dual Hole FX: www.krale.shop/en/transfer-po...
Tools:
• 3 mm Allen key (www.krale.shop/en/screwdriver...)
• 10 mm spanner
• Punch (diameter depending on calibre) (www.krale.shop/en/pin-punch-s...)
• Cleaning picks (www.krale.shop/en/gun-cleanin...)
• Bronze cleaning brush (www.krale.shop/en/cleaning-br...)
• Gas torch
Cleaners and lubricants:
• Abbey silicone grease (www.krale.shop/en/grease-abbe...)
• Degreaser (www.krale.shop/en/catalogsear...)
• Cylindrical mounting glue
Recommended:
• Soft vice inserts (www.krale.shop/en/vice-clamps...)
(Including Dutch and English subtitles)
Please note: as we're not constantly monitoring the comments on our video's, we recommend sending an e-mail to info@krale.shop if any questions arise.
Website: www.krale.shop/
Facebook: / kraleschietsportnl
Instagram: / kraleschietsport - Sport
Goeie instructie, geeft ook een prima indruk van de professionaliteit bij Krale.
Misschien de volgende keer even op 1080p opnemen maar verder top.
great brader unit, very special ... greetings, one barrel.
Good one.
On the last part of the video you mentioned bedding the air rifle.
How do you do that?
Is there an Oring at the end of the liner that you need to make sure is away from the heat , and is seated correctly when re-installing .
Ferry good.🙏👌👌👌👌👌☕
Hi mate are you still managing to ship orders out to the UK with all crazy shit that's going on at the moment in the world? Many thx lee 👍
Great video. Very well explained. Just one question for you. Which type of “Loctite” threadlocker have you used? It looks like it is color green. Would the Loctite 243 work for this application? Or is it too mild strength? Thank you very much
Locktite 243 would definitely work, it's what I've used for both my fx crown mk2 and impact m3 with both huma transfer ports installed.
👍
Hi,how about FX Wildcat MK II?
How much is it for 5.5 and 6.35
Do you ship it tii Saudi Arabia
So no need for the O-ring on the inside?
What is benefits of it? How many percent of speed that can increase?
5 to 10 joules
Is this part now standard in the Impacts that are being sold?
No. It’s an aftermarket part from Huma. Huma doesn’t have a partnership with FX.
Which loctite number do you use?
Please say wich pellets (manufacturer and weight) and velocity did you use for that great groups at 50 m. Thank you.
It is definitely a jsb pellet, seen at 10:36
If i had to guess probapaly a jsb exact jumbo heavy
I use the JSB Exact King Heavy MKII pellets in my .25 cal Impact MKII and shoot better groups than this at 50meter, straight out of the box. No tuning done yet.
FX is amazing, never had such a great experience straight outof the box.
The Huma transferport seems to be a nice addition though.
Thank you! can you please let me know why you need to pull the liner out?
Because it needs to be heated
Harganya berapa?
welke lijm gebruik je?
Wij hebben hiervoor Loctite 2700 borgmiddel gebruikt, die tevens ook te koop is in onze webshop.
Friend, good night, apologies for taking the dare to write to you in this medium, I need help and no one from the Spanish-speaking you tubers answers my concern, I have a fx impact x .25 I bought it second hand, the owner told me that he had shot with the pellets backwards, bone, the pellets came out of the skirt, and from there they do not group, the problem is that I make groups at 40 meters and group in two inches and that is very rare, it worries me, the regulator is at 140 bars, the power wheel is at the maximum, the knob is on the third line and I use 25 gr jsb. What could be