Making barrel rifling using steel tubes
Vložit
- čas přidán 30. 06. 2024
- Making barrel rifling using steel tubes
In this video I will show barrel rifling for a 5.5mm, or .22 cal tube using an allen key. the same allen key method can be used for other calibers too, just make sure that the rifling button is 0.1mm-0.2mm bigger in diameter than the barrel inner (bore) diameter. In my case I used a 5.62mm button for a 5.48mm tube, and it worked quite well as you can see in the video. This barrel will be used for gas propelled PCPs.
Note: This video is for educational and entertainment purposes only. Do not emulate or copy anything you see in this video.
Allen keys: s.click.aliexpress.com/e/_Dns...
12mm OD tube (ID: 5.5mm, 4.5mm, 6mm, 9mm): s.click.aliexpress.com/e/_DEn...
16mm OD tube (more options +7.62, 6.35, etc): s.click.aliexpress.com/e/_Dlo...
LATHE used in the video:
MINI Lathe 7x16 800W (Europe and USA link): s.click.aliexpress.com/e/_DlY...
Asia link: s.click.aliexpress.com/e/_Dlt...
I made a sine bar machine which allows me to make different twist rates but a lot of work...this method you come up with is perfect for people with minimal tooling excellent idea mate well done
Sounds great!
Yes, this works really well and can be made with just an angle grinder, torch and some very basic tools. The end result looked better than I expected, very clean grooves.
Wow, you are a genius
one of the best rifling jobs ive seen
thank you! I hope it will shoot as good as it looks
Very innovative. Looking forward to use it in Pcp. 😀
man, you are the true hero!
👍😎👍
That's really good rifling bro!
Thanks! Let's see the results.
@airsight Idol. pariho kayong magaling gumawa ng airgun. Idol ko kayong dalawa.😊
tanks for the video super cool job !!
Glad you liked it!
This is a good result, I have tried it 🇮🇩🇮🇩
@@DewaSenapanIndonesia 👍👍
Ok brother i am waiting next part for test👍
Excelente amigo, esperamos las pruebas, nosotros podemos construir nuestras propias herramientas, ya que el button rifling se puso escaso, y costoso, hice uno de una broca de acero rapido
😮woww its great work again idol.
Молодец! Я делаю кнопку из шарикоподшипника,потом на токарнике с помощью болгарки прорезаю нарезки.И да,лучше всего проталкивать получается мощной дрелью-перфоратором.Плюс смазка машинная не годится-лучше использовать олеиновую кислоту с литол-24.Удачи в хобби!
Спасибо! Очень интересно 😮
hasil kerja yang baik,selepas ni tolong buat cetakan peluru..
the width of the rifling should be greater than the width of the fields or the same, such a barrel will greatly spoil lead bullets, which means that the accuracy will be poor. I used to make a button on a lathe using a knurling with a straight tooth and a pitch of 1.2 mm, which was equal to 12 threads of 5.5 mm.
👍👍👍
👍👍👍👍👍👍
Would it not be better to start with a 6 mm Allen wrench and grind it down to what you want ?
That would work and I did try it but I didn't achieve as good precision with it. It's about skill so if you can manage to do it and keep the sides consistent in size then you can do it.
Awesome stuff! One question, should it have a chamfer where the projectile leaves the barrel? I've never tried to make something of this sort, but was taught not to ruin the sharp edge on the end of the barrel of my 6.5x55 mm rifle.
Yes, it should be chamfered. It's called "barrel crowning", in the video I did that with high grit sandpaper and an 8mm steel ball, after chamfering the end with a drill bit. That might not sound very precise, but it actually leaves a very fine finish. Some rifle barrels might have different designs, others may have sharp precise non-chamfered ends while others have a deep chamfer. Search "barrel crowning" on Google and check the images, you'll see many different designs.
Also, in my case this will not be used for a firearm, but for a PCP air gun.
@@pcpairgunschannel ah, I see, cool! Awesome to learn new things!
Really amazing. But why do you beat and knock over it after heating it?
because it was only 5.55mm in diameter, that's not enough for rifling. I increased the diameter by doing that, it ended up being 5.62mm
@@pcpairgunschannel 😁😁😁Great, I thought that was likely, but I wanted to make sure.....but did you know why I wanted an Arabic translation? So that I can understand and follow what you are saying. Greetings
Im eager to see the results.
will use this for a PCP pistol. Stay tuned!
Where did you get the steel tube? Great video
@@CarpinteroJesus Hi, there is a link in the description if you want to buy
Gunakan steel wool bro,agar lebih bersih
👍👍
Hey sir, how do I even make a barrel if it's so specific for 7.62mm?
@@arielsgood4972 you can buy precision tubes
Debio poner un paño o una madera para que las limaduras no caigan sobre las guias del torno ya que pueden perjudicarlas😮
Es cierto que mientras lijaba debería haberlo hecho.
Good iob but the pitch seems too short.
Sir is long valve better than short valve?
No difference, they are just different designs.
👍👍👏👏💪💪🇨🇵🍾🥂
Making rifle barrels using tube steels (:
so what do you think of this rifling technique?
جميل جدا
من اى اتجاه ندخل الرصاصه من اتجاه اداخل اداة العمل ام من مكان خروجها
شكرًا
لا يهم من أي اتجاه تدخل الرصاصة، ما يهم هو أن يكون طرفي البرميل أملس، حتى لا تتضرر الرصاصة من أي جانب.
Dont grind on the side of your wheel like that, its not designed for it and the wheel can explode after a while ...
How many long pcp gun berral ?❤❤❤
this is 300mm long, but you can use 200mm, 400mm, 500mm, 700mm... anything you want. this will be used for a PCP pistol.
@@pcpairgunschannel thanku....how can I buying this pcp gun barrel..I want to this barrel..Plzz help me...
@@sonakhuraijam7223 Due to courier policy i can't deliver my own products.
You can make it the same way as I did it in the video, you can buy blank tube and rifle it yourself like I did it in this video.
If AliExpress doesn't work you can buy it from ebay also, just search "hydraulic steel pipe"
Faça uma câmara e uma coroa
Isto é para uma pistola PCP. Vídeos em breve
dont use gloves with a grinder or lathe
google hand de-glove work safe.
gloves drage the fingers in and rip them off - no glove you go och thats hot and a cut
精度怎么样
我将在几周内用这个枪管制作一把手枪。然后我会上传一段测试准确性的视频。
@@pcpairgunschannel 非常期待
Rifling lands too wide
♥♥good job. Well done.. but how accurate is it? A video of the accuracy, please. Is this method effective, please? I would like to activate the translation into Arabic so that all the benefits can be spread. I have translation programs, but they are not accurate in terminology and some words. Video translation is not sufficient. Greetings from Egypt.. and we are waiting for the accuracy video
Thank you!
I will upload testing videos in a few weeks, using a PCP pistol.
@@pcpairgunschannel Waiting.. Greetings
I admire your work, but a rifling button is just about 12$ ishhh so it's not practical to waste your time make all those fuzz? Furthermore you are not even sure how accurate the results would be? If it fails, you wasted time plus the tube you ruined. So why not buy the real thing?? It cost just less than 20 bucks
@@mrkalikutista8729 I would need more than just a rifling button. Commercial rifling buttons cannot be hammered and need tons of pressure, which will end up costing me a lot more than just 12$
@@pcpairgunschannel you're wrong you can do the same hammering with the cheap commercial one. Or use a bottle type car jack to push the rod instead of hammering it. Google hammer button, it's a good button, im using that one, stay away from those cheap chinese craps.
your mind is so limited
lie does not work
@@No_love69 why?