Engine Rebuild On Husqvarna 55 & 51 Chainsaw Part 3/3
Vložit
- čas přidán 11. 04. 2011
- Learn How To Rebuild the engine on your Chainsaw in this easy to follow video tutorial.
Visit my channel for more repair videos; czcams.com/users/donyboy73... - Jak na to + styl
This guy is GOOD! I have a 11 year old '55 and he has given it a new life. Thanks.
Молодец мастер. Прежде чем заниматься ремонтом бензопилы, он ее помыл. И приятно даже смотреть нам видео. Лайк мастеру.
Thank you for your videos! Just fixed my husband's 55 Husqvarna and it runs even better than before!
These videos are amazing! I bought a rebuild kit but didn't really know what I was doing. I followed your step by step instructions and my Rancher 55 runs like brand new now! BTW, it seems like the best tutorial videos on just about any subject always come from Canada. Thank you from your neighbor to the South.
Great tutorial Donyboy. I've got a 55 and i'm considering putting a piston and ring. It's amazing how much wood it's cut. It's 17 yrs old and still going strong. Thanks very much for sharing your expertise. Great channel.
Thanks for the video. I'm currently bring a Husqvarna 51 back to life.
Thanks for going through the effort to teach how this is done. It's a favourite, for sure.
Thanks for the series on this engine rebuild, it was a great help! I just rebuilt a Poulan 2150 LE predator, I replaced the piston and rings but instead of replacing the cylinder I bore out the cylinder with a break cylinder bore. I followed your sequence of taking apart and putting the saw back together. The saw started right up. Thanks for the post and keep them coming!
Kickass step-by-step tutorial! I have no plans of rebuilding my saw yet, but feel way more confident in the project if it ever comes about! Thanks!
I own a 55 Rancher. Watched all three of the redo vids. Superb job.Thank you.
thanks
Used this set of videos to rebuild an old 51 and the process was very simple using the videos. Good attention to detail and shown on camera very well. I used an NWP brand piston kit from Bailey's online and have probably 10 tanks of gas on it and it has been fine so far.
Your videos are so helpful! Thank you so much for the clean, clear, simple videos. It takes an intelligent person to make complicated things so simple! Thanks a whole bunch!
I followed your video for rebuilding my 55. It fired up on about the 5th pull and runs a treat. Many thanks!!
+Jonathan Lee you're welcome
hey buddy thanks for the vid.probly the best video ive ever viewed on youtube.strait to the point.clear instructions step by step.im rebuilding a husky 51 & ordered the chinese piston & ring kit & you helped answer every question in my head.good job.thank you.
Hi Don. Thanks for a very good instructional vid. I put in a new chinese carb and cylinder set and it ran perfectly. Now I just need to fix the oilpump to the chain which is leaking. Keep up the good work!
thanks erik
@@donyboy73 Friend, the revolutions 13200 max for the saw 372xp oe 2003 are okay?
Really nice series of three videos, very well presented. I've got a Husky 51 I've had part way down but it was interesting to see the cylinder/piston R&R. Thanks for making such a clean video.
I have found the outcome from vid 1&2! All three are excellent quality sound and video! Someone said they are therapeutic and I agree! Could watch em over and over! Thank you!!!
Very well assembled !!!!
I was however,taught to run whatever I assemble as a motor first but that was with power tools,I do that with lawn equipment as well,when working in a business I had to do it that because it saves time pulling all that stuff off if a carby was plugged up with crap or something.
When I did up a Stihl hedge trimmer, I fit the cutting blade last after testing it as a motor,the compression was 105 PSI with the new cylinder kit installed & 124 PSI when run in.
That's because the cylinder & rings aren't perfectly round until the rings have bedded into the cylinder.
Great work and great series of videos. Rebuilding my ‘98 55 and just looking to see if it’s as straight forward as I expect… seems it will be. After all these years of 10 cords/yr, the top end finally gave out. It’s a great saw. Awful sad Husqvarna stopped making them. Probably their best homeowner size saw ever.
Really good teaching, eh! Very complete and exacting. I plan to watch all 3 and refurbish my favorite chainsaw!
After watching these videos I'm tempted to buy an old Husky 55 just to do a rebuild.
dony, That was a great tutorial video. Immensely helpful and much appreciated! Thank you!
You're an excellent teacher donyboy...your videos are great and easy to understand. Thank you and keep up the good work. I feel confident I could perform a repair as long as I follow your instructions.
As far as HOW TO instruction videos or tutorials are concerned on ANY subject I think I have never encountered anything as good as what you have presented here. Congratulations on a job extremely well done.
thanks for watching!
@JimiKiwi thanks for watching and greetings from Canada
@maksnajper it is still running and worth it for the money, 50% cheaper but it won't last as long as an original cylinder kit
Thank you very much Donyboy73. You helped me a lot.
Great work on the video, very helpful, informative, and comprehensible. I am currently opening up my STIHL saw. Hoping that only piston and rings are gone and not anything in the crank case. ...........I will try my hand and documenting the project, and will let all you guys and gals how the project goes. >Thanks again Dony
Nice one Dony. It will be interesting to see how your friend gets on with the saw when it does a bit of work. Most 2 strokes ive come across die early because of poor fuel mix as opposed to generally wearing out.
Looking forward to the next one.....
Excellent Job DB! Now it needs power ported. Appreciated that you added additional oil to your fuel. All our hot saws are 32:1.
I would have never thought this puppy ran 50:1 mix. thanks for the input. agree that a little extra oil is far better than too little.
worked perfectly,,,,great video ..ordered kit from Hong Kong,,,$40 screams like new ...thx Donny
the engine sounds pretty good now and plenty of power. a very good re build video.
You are a PRO!
You make it look so easy. Great job!
Thanks for the vids donyboy73, you got a great teaching style, i use your videos for reference building my 372 hybrid..
Donyboy73 Is the real deal. What a great video. As a DIY'er its videos like this that get the job done. Well done Sir, and thank you for saving me a trip to the stuck up local saw shop.
+Rich NA you're welcome
Danke, vor allem das Einhängen des Chokers und der Gasstange haben mir sehr geholfen, wirklich excellent dargestellt!
NIce. Exactly what I needed (especially the throttle linkage to the carb!)
I have been watching your videos for a long time and must say you really know how to teach, Your video quality is great your pitch and pace is perfect. I have a rancher 55 that I needed some direction after I started to put it together. Which way the arrow was oriented to the saw. Thanks and by all means keep it up.
+Gerald Basford you're welcome, make sure you are subecribed
Gracias exelente video muy bien explicado un abrazo desde Puerto Rico!
I had no idea Husqvarna equipment were common overseas. That's cool to know! :) By the way, pronouce the "Q" like a K, and you'll be spot on with the name. "Huskvarna". :)
This is why I went to small engine repair course because watching your videos thanks keep them comeing
@GarrettJDB yes good idea
sort of yes, it does force air in the intake
Excellent work, very good instruction. Thank you.
@pwleppa thanks for watching
thanks great video, you gave me the will to try to attempt the job myself.
Thanks for the videos. I got my dead husq 435 running again with a new piston and cylinder kit. Your videos gave me a good idea of what to expect. If your in my neck of the woods, I'll buy the first round of maple syrup shots.
+jef4130 lol, thanks
Your videos have helped me greatly.(Not just this one) always very well done, and informative. Thank you
Thank you so much for your informative videos. You have helped me out numerous times! When I wasn't sure of something I always turn to your videos...awesome job.
thanks dean
hello dony, your videos pt. 1-2-3 was very knowledgeable, thanks for this information it was wonderful.
Awesome work! The thing sounds fantastic.
@TheSaturnV thanks man
Very helpful videos. Thanks for taking the time to make them.
The best of such I have seen. Thank you!
HI Don, I'm about to tackle refurbishing a 51 Husqvarna because it's difficult to start. I read many of the comments from subscribers and that all are spot on. Thanks for sharing your expertise and time! I'm wondering if you have a video that addresses possible carburetor issues.
enjoyed these 3 vids also great job..... and i learned alot of tips thanks!
Excellent video ….you covered everything exceptionally well
THANKS FOR WATCHING jOE!
Thank you so much! I liked everyone of your vids
very rarely but yes there could be crud in there, in all my years of experience i've rarely had a problem when not taking them off, but it is recommended to take them off, i will make a revised video
@donboy73 Nice vid! I love cutting up wood myself, but starting to learn other things beyond changing and sharpening blades all the time. keep up the good work.
Nice detailed and very informative video series Don.Your channel is always my first database for information on small engines.Thanks
Utterly professional...
Brilliant clear video - you've given me the confidence to do my smaller Husq 137e. Do you know of any major differences that I might need to know between the two models? Thanks again.
Excellent tutorial...
Hi there, I've just rebuilt my 55 thanks to your video and it's awesome. Thanks sooooo much for the idiot proof instructions ! My friend has a 51 that's broken, similar problem but also I think the crank bearings may be a little wobbly. Can u do a video showing how to get at the crank bearings please. Cheers. Al
@YankeeIngenuity THANKS MAN, not bad for a chinese kit!
@spelunkerd thanks
You're very good teacher thank you you helped me a lot
Terrific video, best channel on YT.
Very informative video. Answered all my questions
@TDHReviews i have one lined up for a stihl 026
Very nice and organized work ethics . Great job keep up the good work. Don
thanks
I had to put premix into cylinder to create fuel draw worked like a charm thanks
@GOSAULS thanks
@velox731 thanks man
@hueyhound1 thanks for watching
@MrRmh3481 yes it's much better with more oil in the gas
Still one of my favorite videos. And it's 10 years old.
i have a husqvarna 55 and its broken, i took to the shop and they say it can't be fixed. i was thinking to take it to someone to rebuild it but now im so excited to try it for myself, when i started to watch the first part, i thought was so hard to put it together again, but its so easy to follow you step by step even my english is not to good. gracias Dany.
You helped me a lot. Thanks
gracias por tus videos eres una buena persona que te gusta compartirlos aprendemos mucho de tus videos
you're welcome
Great re- build
Sounds very strong. Great Job i really enjoy these rebuild videos, btw you should rename the video Engine Rebuild On Husqvarna 55/51 Chainsaw. because I think that they have the same crankcase and one is 2 ccs bigger
@partyboyperk u need to replace both diaphragms
Hey Don,,, Nice work,,, saws like new compression wise. Saw you didn't do anything else, guess at ran till it seized? Great job.
Dony,
I'm just getting started in this field, and after finding your site I have learned a great deal of information. The videos you do are AWESOME!!!! I enjoy the way you explain things please keep up the good work. Mike
thanks Mike
Dony,
If I wanted to send you something do have an address I can send it to.
Thanks Mike
Mike Helms yes, I just pm it to you
Thanks Dony,
I new to this Facebook thing so bear with me if I can't find where it was sent I will let you know. Mike
Mike Helms sent on youtube private message
thank you
Great video! Are you a professional mechanic or do it yourself guy. You fix things so well you look like a professional.
Don, You said you have never had a cylinder that would leak. Me either, but there is a first time for everything. My Echo CS-670. I've had it together at least three times with the new cylinder on there and got bubbles around the cylinder base bolt on the flywheel side rear. I've got it to seal with red threadlock on that bolt, but that's just wrong. There is no visible reason for this. Email me with your thoughts if you want. I am going to reassemble it another time with the bolt head spacer contact surfaces in mind. we'll see. Great work you do Don. Thanks for all the time and effort.
best vids -- great job
@donyboy73 it sounds badass!
the best repair woulb be to get a new carb, or try adjusting the butterfly inside and sand down the mark inside the carb with emery paper. remember to use loctite or get a new screw for the butterfly
You make great videos, Dony.
My favourites are the chain saw videos of yours. Luckily I can do some firewood in the near future as the snow is melting rapidly...
:~)
hi don, realy realy good,the other video to, lear'nt a lot here videos are good and clear
and voice clear to. many thanks, lazy joe
you should do more videos of stuff like this of rebuilding things
Thankyou Donyboy!
Fantastic sir. Thank you.
I have a Husqvarna 50, ... should not be too much different :)
you're welcome