How to change your brake fluid

Sdílet
Vložit
  • čas přidán 25. 08. 2024
  • In this video, I am doing a brake fluid flush in my honda civic 2016. This process is common for all cars. Follow the procedure told in the video to do a full flush. It will take around 1 hour to complete. Most car manufacturers recommend flushing brake line fluid every 2 years.
    During a flush, my vacuum pump failed due to the large tube diameter. So, I changed to the 2 person method in which one person controls the brake paddle while the other controls the bleed valve. First, open the bleed valve and ask the person to press the brake paddle. Once fluid stops coming out from the line close valve and tell the person to release the brake paddle. Follow this until you see clean new brake fluid then close the bleed valve.
    Tools: -
    1. Vacuum Pump
    www.amazon.ca/...
    2. 10mm Wrench
    www.canadianti...
    3. Oil pan (You can use any other small container made from the household item)
    www.amazon.ca/...
    4. Some cleaning towels (use any household towel)
    www.canadianti...
    Email: - northubuild@gmail.com
    Facebook: - / northubuild
    Instagram: - / northubuild
    If you have any questions or concerns, please feel free to comment.
    Thank You for Watching Our Video.
    Disclaimer: -
    This video is for assistance only. I am not responsible for any damage or safety of your own vehicle or person.
    Track: Aftermath - Airixis [Audio Library Release]
    Music provided by Audio Library Plus
    Watch: • Aftermath - Airixis | ...
    Free Download / Stream: alplus.io/afte...

Komentáře • 14

  • @bronx321
    @bronx321 Před 2 lety +12

    the line you use to flush the brake fluid should always be in the upright position so no air gets into the brake line. Also the brake reservoir should never be empty

  • @polatalemdar9731
    @polatalemdar9731 Před 3 lety +2

    Remember the order you have to go at which wheel to start with

  • @arturopuebla4924
    @arturopuebla4924 Před rokem

    What is the piece called that your flushing the brakes with

  • @josephbenrosello2445
    @josephbenrosello2445 Před 2 lety +2

    What size of wrench did you used for bleeder valve?

  • @Pauljn
    @Pauljn Před 3 lety +3

    Great video! I’m curious to what size wrench you were using so I know ahead of time?

  • @jillianwilson7776
    @jillianwilson7776 Před 4 lety +1

    Should be done for safety every recommended period.

  • @oron7429
    @oron7429 Před rokem

    What oil brakes i need to honda civic hatchback 2016?dot 4 its ok?

  • @MegaThekiller77
    @MegaThekiller77 Před 2 lety

    must start the engine?

    • @NorthUbuild
      @NorthUbuild  Před 2 lety

      No need to start the engine for this.

  • @gmfigueroa7
    @gmfigueroa7 Před rokem

    Was 3 12oz bottles enough?