Меч это нечто большее чем выровненый и обточенный подшипник. Его вообще не ковали. Таким вот только и рубить бутылки да гипсокартон, потому что от такой закалки без отжига он хрупкий. Меч должен рубить железо, я так свои клинки проверяю
I'll have to admit, that is one hell of a job brother!! I want to try to make my own bowie knife sometime in the near future. But again, amazing job bro!!!
That sword could be so heavy to wield due to its thickness and that handle is uncomfortable when the sword hit a harder object. Nice looking blade though. Overall, it will KEAL!
I gotta admit... as a knifemaker, i was ready to call bullshit based on the thumbnail. This surprised me. Dedicated work. Especially difficult on 52100 and esp a thick-walled race. By hand. With a 5lb sledge. With minimal, underpowered tools. Props. 👊 If youre still pursuing the craft, lmk. I may be able to gift some materials or supplies. I still make knives, but only really rare occasions that i get odd custom design requests or do a small series run.
Its ridiculous! Heattreating is bad. Surface grinding also. This piece must be heavy an useless. But i also say its sexy! He has to improve the skils an make more.
Где-то тут наебалово есть в начале была обычная обойма подшипника но как она легко включилась меня очень это удивило Я до жёлтого цвета нагревал и з******* кувалдой бить отключилась она медленно плюс что интересно её хоть закаляй хоть не закаляй она всё равно твёрдая сверло её не берёт просверлить а он её легко просверлил что-то блять тут как-то нечисто дело вот я не могу поверить б**** в начале было обойма А дальше Мне кажется какая-то просто железка н****
I may be wrong but didn't look hot enough to be tempered correctly. You might want to buy tempering files. They will tell you what level by scraping the metal
The steel he used is extremely hard as is. Doesn’t need to be as hot as other steels to achieve the same harness and this thing will still probably shatter if it was actually getting used.
я, как совершенно не специалист, из недостатков увидел только отличие повторяющихся деталей (отверстий и зубцов) и небольшая неровность ребра скоса по клинку. А так шикарная работа.
Или заточка односторонняя,как на ножах для сашими. Чтобы лезвие было тонким.чем тоньше,тем острее.если так,то и неправильный баланс углерода.чуваку просто нехер делать
@@johnconstantine2926 а ещё рукоять на которую положили болт как при украшений, так и просто создание одекватного овала рукояти без острых краëв с двух сторон
Привет!Все писали и я напишу,если это твоя первая работа то сайдет.После её изготовления ты поймеш все свои недочеты и нехватку опыта,а если это просто для показухи для дурака то отличный мечь... Мечь сам по себе оружие специфическое и для определённых целей.Структура ,виды мечей ,есть разные мечи напримере твоего меча ниндзи .У ниндзи мечь тонкий и лехкий для одного смертельного удара по незащещонному броней телу противника,как нож повара,если противник в броне ниндзя убежит .А твой как двуручник по весу и остроте "не разрежу так пришибу" железяка в стать.Сори за стёб если будеш продолжать то удачи история мечей очень огромная,и каждый вид меча для разных целей...Удачи...
I'm not a sword snob. I can't tell you what makes a sword a "good" sword. But, yours looks cool and it's sharp. In my opinion, that makes it a good sword. Nice job.
To make a good sword, you need at least two types of steel with different amounts of carbon in them, one for the spine and one for the edge, otherwise, you have a brittle sword. You also need it to be solid and without cool-looking holes, which make the sword even more brittle. And you need it to be sharp enough that it cuts through flesh and bones, not just water bottles. A sharp katana cuts through many pieces of bamboo in one masterful swing. All in all, this is in no way a good sword, but it is a cool-looking toy.
I know nothing about making good weapons, but there is a problem with the all videos like these - after forging, people don't test the weapons for durability. And we know why - because tests targets to finding the point when the weapon breaks. It would be the best way to proove the quality, but it will make the videos strange - "today i'll make a sword to break it"
I'm not a blacksmith, I do really like how this came out. Only gripe is the handle being full metal with some light wrapping. A softer wood handle would feel better.
I've always wanted a samurai sword, but I want one that's made in Japan the traditional way. They're incredibly expensive so it's not likely it will ever happen.😂
There's a guy in Oregon that was trained by the masters in Japan. The only powered item in his shop is the overhead light. He does all his smithing in the traditional ways. $10,000... 6 months and you to can own a 'real' samurai sword. His name is Michael Bell. Compare that to $100,000 and 2.5 years...
Idk why so many of comments are negative. Its just a decorative piece. Yall act like he's making a documentary on how true swords are made for battle or something lmao. He made this for the entertainment of youtube. The only battle this sword will ever see in its life is dealing with the mean comments from key board professionals 😂😂
Shame you didn't do a differential heat treatment. Bearings are usually made out of high carbon and chromium steel, which means you can make it very hard. Hard blades hold edge better, staying sharp for much longer, but are more brittle and prone to damage than softer steel. Which is why some blades- most notably Katanas- are differentially hardened. You get blade with exceptionally hard edge and much softer spine- traditional Katanas go even a step further and are made out of multiple different kinds of steel (high carbon edge, medium carbon sides, low carbon or even straight up iron core)- which prevents potential cracks from spreading and damaging the whole blade or even breaking it in half in most extreme cases. You get the benefit of extremely hard edge without having to worry about the whole blade breaking.
Wow👀I watched a video of a guy making a mosaic sword......I'm still not 100 % sure how he did it I always knew forging was a skill..but the more I look into it the more complex it seams to be Really super cool
Man, I gotta say, your forging process is clean! 10/10! But why no hilt design but just the wrap, or even a scabbard for such a futuristic sword?🤔 Still an amazing job, though. Blacksmiths have their reasons, I guess. Great forge!
You only really need a hilt on a stabby weapon , to protect your hand from sliding forward onto the blade . And maybe block a little bit of the other person's sword from hitting your hand .
It would be super amazing if you could create a sword using the nine tailed fox from naruto has the handle and a long blade coming out his mouth colored like the tailed beast bomb blast and the nine tails eyes being rinnagon that lights up once pulled from the shef designed with black lighting detail
Sure is cool to forge your own sword
local police: wait is that legal?
Texas police: yes
Меч это нечто большее чем выровненый и обточенный подшипник. Его вообще не ковали. Таким вот только и рубить бутылки да гипсокартон, потому что от такой закалки без отжига он хрупкий. Меч должен рубить железо, я так свои клинки проверяю
@@user-uf9ms7rk3k no one can read that and i dont think anyone cares
Hay you play Mobil if so can we play I’m Realy good
@@hoovyonlifesupport1129 that’s why there’s a translation button are you blind?
Very nice sword! Great work!😁👍⚒️🛠️
ベアリングは刃物にも使える高炭素鋼が使われていることが多いらしいので、実用的でかっこいいこの作品は素晴らしい。
Beautifully done 👍
Grande profissional muito bom excelente Belo trabalho parabéns pelo vídeo 👏👏👏
最高にcoolなNINJA SWORDだ！製作者さんのpassionが感じられるよ。この剣は製作者さんの魂が込められた一振りだね。
Superb work and awesome blade bro 👍👍👍👍
I'll have to admit, that is one hell of a job brother!! I want to try to make my own bowie knife sometime in the near future. But again, amazing job bro!!!
mamañema
Mano não sei se você vai ver esse comentário mas que trabalho bonito esse seu 👏👏🇧🇷
A work of art... congratulations!!
Belo trabalho, um abraço do Brasil 🇧🇷
Um país abraço o cara?
That sword could be so heavy to wield due to its thickness and that handle is uncomfortable when the sword hit a harder object. Nice looking blade though. Overall, it will KEAL!
No sé por que YT me recomienda estos videos pero lo agradezco, esa espada quedó GENIAL!
Comentario en español 😮
¡Es tu señal para convertirte en un gran herrero!
Very great work!
Nice manual hydraulic press, goodjob
pretty cool sword 👍
Magnificent effort you sure got it down Practice makes perfect Aloha brother....
You should also try it out we want to see how smooth it can cut . By the way your swords are amazing 🖤
Great work
Simply put it's beautiful 😍
This is an amazing work of art ❤
L4D2 Coach:Got me a ninja sword!
I gotta admit... as a knifemaker, i was ready to call bullshit based on the thumbnail.
This surprised me. Dedicated work. Especially difficult on 52100 and esp a thick-walled race. By hand. With a 5lb sledge. With minimal, underpowered tools.
Props. 👊
If youre still pursuing the craft, lmk. I may be able to gift some materials or supplies. I still make knives, but only really rare occasions that i get odd custom design requests or do a small series run.
Its ridiculous! Heattreating is bad. Surface grinding also. This piece must be heavy an useless. But i also say its sexy! He has to improve the skils an make more.
@@messermanufaktur-knifeart What is he gonna use it on
@@deezznutss6657it’s for the zombie apocalypse, duh
Круто. Не ожидал, что такое можно из ШХ15 сделать, обычно рессору берут она же 65Г.
Где-то тут наебалово есть в начале была обычная обойма подшипника но как она легко включилась меня очень это удивило Я до жёлтого цвета нагревал и з******* кувалдой бить отключилась она медленно плюс что интересно её хоть закаляй хоть не закаляй она всё равно твёрдая сверло её не берёт просверлить а он её легко просверлил что-то блять тут как-то нечисто дело вот я не могу поверить б**** в начале было обойма А дальше Мне кажется какая-то просто железка н****
looks like MGS4 Raiden's sword, great job!
Looks like someone got a little SICK. Great work !!!!!!!!!
awesome sword
Meus parabéns ficou chow que espada essa meu amigo
I may be wrong but didn't look hot enough to be tempered correctly. You might want to buy tempering files. They will tell you what level by scraping the metal
True it should be over 1.5k
Agree with you
Good steel
Your right
The steel he used is extremely hard as is. Doesn’t need to be as hot as other steels to achieve the same harness and this thing will still probably shatter if it was actually getting used.
Awesome!!!!!!
THAT'S real asmr!
I always watch a content like this when I wanna sleep xD Works pretty well tho
Nice 👍
Good job 👍
That is one of Best job I have see..GREAT and Professional job..congrats..note 10
Luar biasa aku salut sama bapak ini, samurainya keren
masterwork
That looks better than the ones I have
Awesome.
Dude is just molly woppin those bottles 😂😂
я, как совершенно не специалист, из недостатков увидел только отличие повторяющихся деталей (отверстий и зубцов) и небольшая неровность ребра скоса по клинку. А так шикарная работа.
Или заточка односторонняя,как на ножах для сашими. Чтобы лезвие было тонким.чем тоньше,тем острее.если так,то и неправильный баланс углерода.чуваку просто нехер делать
@@johnconstantine2926 а ещё рукоять на которую положили болт как при украшений, так и просто создание одекватного овала рукояти без острых краëв с двух сторон
a sword is a part of my life.🥰but I don’t have😞that so crazy .
Привет!Все писали и я напишу,если это твоя первая работа то сайдет.После её изготовления ты поймеш все свои недочеты и нехватку опыта,а если это просто для показухи для дурака то отличный мечь... Мечь сам по себе оружие специфическое и для определённых целей.Структура ,виды мечей ,есть разные мечи напримере твоего меча ниндзи .У ниндзи мечь тонкий и лехкий для одного смертельного удара по незащещонному броней телу противника,как нож повара,если противник в броне ниндзя убежит .А твой как двуручник по весу и остроте "не разрежу так пришибу" железяка в стать.Сори за стёб если будеш продолжать то удачи история мечей очень огромная,и каждый вид меча для разных целей...Удачи...
Что это было?
Ты че даипался
Nice ninja
Rancaekek hadir 🔨🔨🔨
Too bad about the holes on the blade being misaligned. (Not the same size/not in a straight line) other than that, it's a masterpiece.
It's not a masterpiece if it has flaws 😅
Good one
Хорошо вышло.
Я б рукоять толще сделал и гарду. Хотя и так сечёт нормально))
Bravo mec
Красота))))
"My sword is a tool of justice!"
cara que linda espada eu queria uma dessa e bem afiada
woww good job🥰
Muito bom
Almost looks like something a mandalorian would use , just made out of a bearing instead of Beskar 👍
Nice
impressive
Galing . Mas maangas sana kung resin ang ginamit sa may handle
You have inspired me to make something similar
I wish I had 2 of those swords.
I'm not a sword snob. I can't tell you what makes a sword a "good" sword. But, yours looks cool and it's sharp. In my opinion, that makes it a good sword. Nice job.
To make a good sword, you need at least two types of steel with different amounts of carbon in them, one for the spine and one for the edge, otherwise, you have a brittle sword. You also need it to be solid and without cool-looking holes, which make the sword even more brittle. And you need it to be sharp enough that it cuts through flesh and bones, not just water bottles. A sharp katana cuts through many pieces of bamboo in one masterful swing. All in all, this is in no way a good sword, but it is a cool-looking toy.
You don't need to be sword expert to understand this is junk...
@@user-lr3dt4me5j It's only junk if it fails in battle. I highly doubt it will ever see battle. It will most likely be used for decoration.
I know nothing about making good weapons, but there is a problem with the all videos like these - after forging, people don't test the weapons for durability. And we know why - because tests targets to finding the point when the weapon breaks. It would be the best way to proove the quality, but it will make the videos strange - "today i'll make a sword to break it"
How long did it take you to make and very well made very nice sword
Very nice 😍😍😍
Nice. Lain kali harus safety firs ya
I'm not a blacksmith, I do really like how this came out.
Only gripe is the handle being full metal with some light wrapping.
A softer wood handle would feel better.
its mall ninja trash, not something to be taken seriously as an example of a sword.
Gotta love how so many kids try to pass off machining as smithing!
Yep. I was told long ago " You are either a good WELDER....or a food GRINDER ".
i wish i owned some like that
That's a sword I would use in a zombie apocalypse
nice weak spots gj
Loco me encanta como haces las katanas tenes un estilo muy único, cuanto vale una como esa ?
I've always wanted a samurai sword, but I want one that's made in Japan the traditional way. They're incredibly expensive so it's not likely it will ever happen.😂
There's a guy in Oregon that was trained by the masters in Japan. The only powered item in his shop is the overhead light. He does all his smithing in the traditional ways. $10,000... 6 months and you to can own a 'real' samurai sword. His name is Michael Bell. Compare that to $100,000 and 2.5 years...
Idk why so many of comments are negative. Its just a decorative piece. Yall act like he's making a documentary on how true swords are made for battle or something lmao. He made this for the entertainment of youtube. The only battle this sword will ever see in its life is dealing with the mean comments from key board professionals 😂😂
It would be awesome if you did a data mosh at the end where you go to pick up the bearing and I turns into a sword😁
good job
i own one of those
Bro just imagine the arsenal of weapons this guy have at home
Shame you didn't do a differential heat treatment. Bearings are usually made out of high carbon and chromium steel, which means you can make it very hard.
Hard blades hold edge better, staying sharp for much longer, but are more brittle and prone to damage than softer steel.
Which is why some blades- most notably Katanas- are differentially hardened. You get blade with exceptionally hard edge and much softer spine- traditional Katanas go even a step further and are made out of multiple different kinds of steel (high carbon edge, medium carbon sides, low carbon or even straight up iron core)- which prevents potential cracks from spreading and damaging the whole blade or even breaking it in half in most extreme cases. You get the benefit of extremely hard edge without having to worry about the whole blade breaking.
Dam that’s a lotta info
Wow👀I watched a video of a guy making a mosaic sword......I'm still not 100 % sure how he did it
I always knew forging was a skill..but the more I look into it the more complex it seams to be
Really super cool
Видео из разряда "я у мамы кузнец-нинзя"
"Nice knife"
Но работа красивая👍👍👍👍👍
nice one centimeter
Holy shit that is so good
nice👍👍
(robbers) “ give me all your money”
(These types of CZcamsrs) “ITS SHOW TIIIIME”
Está hermosa 😍👏
😊😊😊
Só tem gringo aqui em fim deve ter dado muito trabalho parabéns
these videos are so good
Cool 👍🤞😎
Man, I gotta say, your forging process is clean! 10/10! But why no hilt design but just the wrap, or even a scabbard for such a futuristic sword?🤔 Still an amazing job, though. Blacksmiths have their reasons, I guess. Great forge!
You only really need a hilt on a stabby weapon , to protect your hand from sliding forward onto the blade . And maybe block a little bit of the other person's sword from hitting your hand .
Такой коментарий может написать только профан в кузнечном деле ,на видео все плохо и все неправильно
Is it just me, or does this blade look like Sundowner's blade from MGR.
I thought it looked like raidens
Искусная работа мастера
무겁고 튼튼한데... 일대 일 싸움이라면 좋지만,전쟁터라면 너무 힘둘겠다.
Es letal y Cortara 😁
欲しいｯｯｯｯｯｯｯｯ感動!!!!!!!!!!🤩🤩🤩🤩
It would be super amazing if you could create a sword using the nine tailed fox from naruto has the handle and a long blade coming out his mouth colored like the tailed beast bomb blast and the nine tails eyes being rinnagon that lights up once pulled from the shef designed with black lighting detail
Bagus banget 👍
HERMANO, UN EXCELENTE TRABAJO, TE FELICITO. tengo una duda, ¿la hoja ya no se oxida? o sea la corrosión no le afecta?
칼자루가 에바네
If an apocalypse happens I think we all know where we can find some weapons.
Wow tech is good. Who said it's not good.