Toyota Tacoma Clean Fog Lamps install ✨🔥
Vložit
- čas přidán 13. 03. 2021
- Here I show how I installed fog lamps on my Toyota Tacoma
I went into detail to show how I ran the wiring and where I made the nescessary connections.
I am very happy about how it came out 😃
I will strongly recomend that if you get a fog lamp kit, that you make sure you inspect it properly asap, because when I got mine there was a main part missing and had to contact the seller.
Also I am not planning to drive w/ the fog lamps on, the whole time,
I don't want to bother incoming traffic 😒
It personally bothers me when I see people driving w/ "crazy" bright lights at all times, blinding others ( like when people drive w/ a LED light bar on the whole time 🙄🤐 )
Thanks for watching and have a good day 😎
#TacomaFogLampsDIY
#ProjectLilTaco
#5lugTacoma
Good job on the harness routing. Looks pretty factory 👍
So stoked
Hola, hoy ha sido un día lleno de mucha actividad y alegría vino mi hijo a visitarme y no había podido ver tu video, aproveché para que me llevara a surtir mandado pues solo cuando el viene es cuán compro lo de la casa para cocinar y me da gusto verte que vas avanzando en tu proyecto excelente trabajo vaya que te admiro por todo lo que sabes hacer como te dije en una ocasión un estuche de monerías, se ve fantástico y pues gracias a Dios que te quedó muy bien, cuídate y que Dios te bendiga y nunca te falte sustento, saludos.
Thanks for the video, I think the green wire by the button is to light up the button so you need to connect it to the dashboard lights
Thank you for these videos
Thank you!
Excellent video and a really clean installation! Thanks for showing all the details and steps for the installation.
Thanks 👍🙂
Thank you, looks really nice 🙂👍🤓
Aye man new mini taco owner here and I love how happy you get after seeing your work reminds me of myself when I complete a successful mod !! Just installed a truck camper on mine and installed a new window and I got just as happy as you when I saw my work take care man and keep on posting the taco !
Thanks
It is very rewarding when you finish a mod and it comes out better than expected 😃👍
This helps out a ton. Thanks!
Great job! Like your set up.
Great... Thank you!
Well done, I’m inspired!
Thanks for showing what fused worked under the dash!
You're welcome
Thanks for watching 👍🙂
Thank for video got the green wire in right place. Looks more expensive
Wow for a base model.
09 Tacoma base model? Same as mine! Can't wait to install the kit I got. It's the same as yours :) thanks for the video!
Nice 👍
Nice truck bro ! good job on fog lights, looks good. I don't know if I'd have the patients to do it. Well done.
Thanks 🙂👍
Looks great !
I find your videos very descriptive, and interesting. I like the way you break down the install so the inexperienced people like me can follow.
I gained a lot of useful information from your cruise install video as well.
Thanks, and keep up the great work !
Thanks for the kind words
I appreciate it 🙂👍
might want to keep a fire extinguisher inside the truck, a class C for electrical fires.
Do you have a link for the kit you bought? Thanks!
Nice job! Why do you need two power sources, one in the cab and one in the engine compartment?
Thanks 👍🙂
The power source inside the cab, is only to give the signal to the relay, it does not "power" the fog lamps.
It is mainly so that the lights won't turn on unless the key is on the on position and if I forget to turn off the fog lamps, when I turn off the truck, the fog lamps will automatically turn off when I remove the key from ignition.
The power in the eng compartment, is what is powering the fog lamps
What did you do with the green wire.
At 9:35 of the video I explain where I connected the green wire
at 10:24 one can see a red wire connected to the 20amp fuse
The green wire was extended w/ a red wire which is the one shown at 10:24
I hope that helps.
NOTE: the fog lamps are being powered by the connection on the fuse box by the battery, the green cable is only to allow the foglamps to work when the key is turned to the on possition.
The red wire inside is for the power supply for the switch? Did you add a fuse to the red wire? How did you do that?
No, I did not add an extra fuse.
I explain where I connected it at 9:45
I made the connection in an open location on the fuse box.
There was no need to add another fuse.
I also only ran two wires from the engine compartment to the cab, the green wire (which is the third wire on the plug inside) had to be extended and since it is a power/signal wire, I used a red wire to extend it.
I hope that helps 👍🙂
Thank you. Your explanation helped!
Can you please post the link of the kit you installed?
Hey
I am sorry but the ones I used were a pain.... and I could not recommend them
They send me a kit and it was missing a major mounting point on one of the foglamps.
I contacted the seller and they finally agree to send me another kit.
The second kit had a harness that the plugs did not match the foglights 😑
I ended up using the harness from the first kit and the lights from the second kit
I also checked on Ebay and the item is "no longer available" from that seller.
Link for kit
I am sorry but the ones I used were a pain.... and I could not recommend them
They send me a kit and it was missing a major mounting point on one of the foglamps.
I contacted the seller and they finally agree to send me another kit.
The second kit had a harness that the plugs did not match the foglights 😑
I ended up using the harness from the first kit and the lights from the second kit
I also checked on Ebay and the item is "no longer available" from that seller.