That was super informative dude. I’m pretty new to speed running. Like my bashers I thought yep! Best quickest most expensive servo or nothing. Learnt fast that that was completely over kill especially when you basically have to stay straight. Little twitch at 130 and it’s across the other side of the road. 😂 you vid helps with some great tips . Thanks
Thanks! That servo was an older servo that took a crap on me, so I swapped to another brand thats been solid but doesnt fit very well. Going to be swapping in a new one tomorrow before I head out for another speed run. www.amazon.com/gp/product/B09VBFZ9KW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1
Are you able to get the delay out of your perfect pass with the radiolink? I have not been able to figure it out… it has a horrible delay no matter where I set it
Calibrate your ESC first with the perfect pass turned all the way down. Make sure you don't have any throttle delays set on the radiolink, if you haven't messed with that then it should be good to go. Once you finish calibrating the ESC turn it off then dial the PP to the half way point. Turn it back on, elevate the car and give it full throttle. It should show a delay.
So I did all that… the throttle delay is still there… I think Raz called it beginner mode…. Somehow I guess it can be turned off just haven’t figured it out with the remote…. I’ll check to see if there is a delay in the remote. I’m not sure….😩
hi, i wanna ask about the dual rate, i use almost the same controller (mine is the 6ch version). how do you set the switch for dual rate option as you showed in the video? mine don't shows the SW option, only ST and TH rate. thanks
@@speeedy_rc yes I'm so excited last year I did a little speed run contest where we was challenged to take a 3s infraction or vendetta and get it to 100mph... couldn't use more then 4s and all electronics had to be spektrum it was so fun.... This year this is my idea hopefully to inspire others to jump into speed runs and learn with me got some killer sponsors backing me m2c sent their CF and some aluminum like their ultimate foundation motor mount and front upper suspension mount RAMJAM racing sent all his titanium stuff just waiting on castle to ship out the xlx2 and 2028 1700kv I do need a few more bits like servo and mount and tires lots of tires lol.... couple other things but I'm new to this and gonna learn as we go.... the series is called PUSHING THE LIMITS 130s is my initial goal but some say yes it can and other wanna tell me I can't do it lol
@@RC4us Well good luck with that! If I had an infraction I’d give it a whirl. There’s a Vendetta 3s challenge going on right now. It’s pretty open as far as chassis but you’ll have to use Vendetta arms and axles. Top Vendetta runners are in it
The info I was looking for. Thank you.
Very helpful! Thanks for posting.👍
Well done 🏎️🔥🔥🔥
That was great, I'm just starting out and was having trouble with my steering, too touchy.
Can't wait to try that set uo.
That was super informative dude. I’m pretty new to speed running. Like my bashers I thought yep! Best quickest most expensive servo or nothing. Learnt fast that that was completely over kill especially when you basically have to stay straight. Little twitch at 130 and it’s across the other side of the road. 😂 you vid helps with some great tips . Thanks
Nice buddy great video
great video bro very informational didn't know i can do that
Glad to help
Very helpful! Thank you!
Great Job ! Thanks
Great vid
Very Cool
Awesome video....subbed
Thanks!
Thanks
Awesome video brother…. What servo are you using? Very nice car btw!.
Thanks! That servo was an older servo that took a crap on me, so I swapped to another brand thats been solid but doesnt fit very well. Going to be swapping in a new one tomorrow before I head out for another speed run.
www.amazon.com/gp/product/B09VBFZ9KW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1
Are you able to get the delay out of your perfect pass with the radiolink? I have not been able to figure it out… it has a horrible delay no matter where I set it
Calibrate your ESC first with the perfect pass turned all the way down. Make sure you don't have any throttle delays set on the radiolink, if you haven't messed with that then it should be good to go. Once you finish calibrating the ESC turn it off then dial the PP to the half way point. Turn it back on, elevate the car and give it full throttle. It should show a delay.
So I did all that… the throttle delay is still there… I think Raz called it beginner mode…. Somehow I guess it can be turned off just haven’t figured it out with the remote…. I’ll check to see if there is a delay in the remote. I’m not sure….😩
hi, i wanna ask about the dual rate, i use almost the same controller (mine is the 6ch version). how do you set the switch for dual rate option as you showed in the video? mine don't shows the SW option, only ST and TH rate. thanks
Are you on IG or FB? Would be easier to chat there
I’m having this same issues, I’m wondering if I need to update my software. I do have fb to chat not ig tho
Hey do you need a high voltage for radio link transmitter
No
Bro I have a rc4gs v3 but for some reason I already check gyro and all my car if I full throttle at take off wil swing to the left
Do you have a video showing whats happening? It seems like the gyro my be reversed or something. Could be gyro gain is too high. Not sure
@@speeedy_rc I will record a video later today you have an email or ig I can send it too I need some advise
What batteries are you going with?
Redondo Beach RC Azure lipos
@@speeedy_rc thanks
How much gyro input do you use
Very little. 10-15%
@@speeedy_rc but you do use a gyro or avc whatever you wanna call it... I'm starting a series on my channel trying to get a 6s infraction in the 130s
@@RC4us Yes, I do. I use a gyro on all my cars. That should be fun!
@@speeedy_rc yes I'm so excited last year I did a little speed run contest where we was challenged to take a 3s infraction or vendetta and get it to 100mph... couldn't use more then 4s and all electronics had to be spektrum it was so fun....
This year this is my idea hopefully to inspire others to jump into speed runs and learn with me got some killer sponsors backing me m2c sent their CF and some aluminum like their ultimate foundation motor mount and front upper suspension mount
RAMJAM racing sent all his titanium stuff just waiting on castle to ship out the xlx2 and 2028 1700kv I do need a few more bits like servo and mount and tires lots of tires lol.... couple other things but I'm new to this and gonna learn as we go.... the series is called PUSHING THE LIMITS 130s is my initial goal but some say yes it can and other wanna tell me I can't do it lol
@@RC4us Well good luck with that! If I had an infraction I’d give it a whirl. There’s a Vendetta 3s challenge going on right now. It’s pretty open as far as chassis but you’ll have to use Vendetta arms and axles. Top Vendetta runners are in it