Because the builds are speed run cars I think if he bashed also he would probably have more but the content is all around good for both so who knows. I love this shit regardless lol
My soldering jobs have went from "it works" to "WOW! I did this?!" So nothing but love Raz, I've been spreading the word, Such a clean build, nicely done!
OK, I'm learning about soldering, how to setup batteries in parallel while it's really well explained with a excellently filmed video and learning a bad joke. I love your work ❤️
I love your videos man. I live out in the beautiful countryside miles from a piece of flat concrete or asphalt that would be suitable for speed runs, but now I'm thinking about how I can build a "dirt road" speed runner. I put it all together in my head but the biggest hurdle seems to be tires. I'm skeptical the belted tires would hold up in the terrain at that speed.
Great to watch and I’m glad you didn’t skip over the things you were doing . I usually tin both the wire and plug before joining but I have just done it ‘dry’ also and it seamed to be just as good 🤷♀️ . Keep up the good work 👍👌👍
Great video Raz! The anti spark connectors is the next upgrade for my limitless. And I will be copying your wiring with the new connectors. Soldering job was fine! Neat and no melted connector! I ignore what the rest say about your soldering skills🤥😳
I always make sure to plug the opposite connector into the connector I am soldering. It helps keep the bullets inside these style of connectors straight.
Raz Im loving the content, starting watching a couple of months ago now. The way your sharing your knowledge is amazing and really entertaining. Great work.
And I just wanted to say Your tutorial on sauttering was awesome I thought I knew how to sautter until Today you really helped advance my sauttering skills to to the Max so so we will be looking out for you just be on the lookout appreciate you greatly
The saying "there's more than one way to skin a cat," actually does not refer to the feline cat, it refers to the catfish because there are so many different ways to skin it and clean it. I went about 30 years thinking they were talking about cats until someone told me that. Lol you're welcome.
i did something similar. i put the xlx 2 in the back on the right swung the motormount around 1717 1260kv in there with cooling and then we made our own GFK Lipo plate on the other side to rise and secure the 2 4s lipos. fits in there pretty much perfect. and no gluestuff on the lipos since i used the old straps to secure the lipos to the gfk plate and the plate is secured with.... well 3m Dual lock XD also the xlx 2 was raised to and screwed to a new gfk plate with rubber risers and 3m again on the plate to chassis.holds extremely well and i can even remove it all relatively easily
Sir you earned my respect and sub. I just recently purchased a Limitless should be getting here tomorrow. Your great step by step videos have really helped me to setup my Limitless. Thank you for what you do for the RC Hobby.
This series is like the speed runners Bible 😂. Ive seen them all multiple times. Thanks for all the help with everything. You helped soon much with my first speed run build. What Temps u have your solder iron set too?
Also I wanted to say that is that the information that you're putting out and the way that you're putting it out in a teaching and learning format we don't have a lot of the RC and the enthusiast doing it the way you do so I encourage you again to hang in there and If you keep putting content out like the way you're putting it out get out you will prosper from it that is a guarantee because information is power and you are putting out Is a lot of power about these RC cars Stay encouraged We will stay tuned in and Hopeful you will prosper soon
As long as your not putting solder on the iron to apply solder to the connection your good. Tinning the wire is always best. Less heat is best so prepare for success and it will go easy.
Great clean build setup. I did like the placement of the xlx2 so I adopted that👍🏼😁 Also, great job on the soldering. Those were some awesome tips. I like to plug the male and female connectors together so when the soldering is getting too 🔥🥵 the plug doesn't melt away. It stays in position. Almost done! Can't wait until the next video. Heat job.
Real nice video👍. Maybe a suggestion, buy youself (if you dont have one jet) a good air extractor with a filter. Fumes from soldering are really bad to inhale. And for some reason the smoke always goes right to my face😂😂
i had to take the durlock off the battery i made a stryene bottom in my tray works great thanks my friend great videos thanks for the help on alot of stuff keep the great videos comeing
Hi your channel is awesome and it's great that you help people with their problems! I have a 1/10 carten t410r with a tp motor 4040scm and 4200w with a hobbywing Max6 on 8s. And solid axeles in the front an rear. I have now the problem that any time I accelerate the car goes to the left side an if I stop accelerating it drives to the right side. It seems that ist lips to the right withe the rear axle. And the car ist very slippery and a able to drive. Would be great if you have any idea. Greetings from Germany.
Quick question: would you need a cap pack with this setup and what are cap packs actually useful for or should I say Intended for and when are they suggested to be used?
Cool build. Great info.Hay do you know of anyway to get the toe-in out of the rear wheels on an X-Maxx? I built a speed runner XLX2/1100 X-Maxx I've gotten to 76mph and it has a bad speed wobble. Thinking if I remove the rear toe-in it would help. Cheers👍🇨🇦👈🤠
I'm mega new to this whole thing so I'm sorry for probably asking a dumb question but why do we need two batteries? And why the cutting and soldering? I'm super new to this, last time I had an RC car was 15 years ago and I was drifting so I really have no clue why those things are needed
@@choke666 I can’t stand the play in the steering setup. I’ve replaced every part and some twice trying to sure up the play. I have gotten rid of most of it but I can’t get rid of all of it so I bought a slider off the Bay for a transplant.
This video is so good Bro. You do such a great tutorial on soldering. I struggle all the the time with my connections and and this gives me way more confidence. Thank you for your insights.
If you ask me a great build. I would have done a few things diffrently like not stacking dual lock to raise something and use foam or carbon plate instead or just making the esc harness for 2 packs instead of this to my opinion weird connector thats kinda pointless in my opinion. And primarly taking off the batteries out of the car for soldering just for convinience xD But still a great build
I can’t say anymore than a lot of others already have…. only that you keep the content coming, as it’s first class Raz👍 extremely good tutorial along with great editing… Hopefully CZcams will start promoting your content again as these videos need to be seenu from would be a great loss🙏🏼
Raz I know your not making these videos for me only ; but I want you to know that the way you put information is awesome. So I want to encourage you to hang in there your information alone is need. I know you made mention about CZcams paying you beans instead of steak it will come just hang in there but I thought it was just a sharing thing but now I know. I've been with your channel for a while but I learned something new I thought you were getting paid off of perfect pass and your carbon fiber accessories. I thought you had money to get Rc cars and just wanted to teach us new and secrets about the Rc game; and I'm saying that because I have about 150 rc cars but no channel. I'm thinking you gotta 9 to 5 and you were rich but like I said I learned a lot today
Hi Raz awsome info I just purchased the V2 and I need to see the video on how to extract the Qs8 bullets can you please send me the link thanks have a awsome Day or Night 💯👍🏾
Why 10 dislikes? People jealous or something? Lol of your knowledge and stuff? Maybe it's their ego? 🤣 i recently subscribed your channel. I'm just starting to get into the whole rc stuff but i know the knowledge you have and share is something you don't learn easily. Thank you for sharing!
Hey buddy I have a mmx8s in my limitless what kind of batteries do I need buddy I had 6s 40000 mah 100c and the second pass I seen smoke the battery burned up that's all.i need help please
Hey think you mean 4000mah.? First you should proof that the 100c is the continuous discharge rate. If it’s continuous the battery can deliver 400 amps but what is the max your motor can pull? For very good informations go to rc explained on CZcams. That guy‘s got best knowledge in rc electronics. May you’ll get help there 🤘🏻
Is it possible to run a 4070 motor and still have the batteries side by side with the xlx2 im looking to build a drag/speed run rig with the limitless.
@raz shifrin, hi love your videos was trying to do a build like this just order the 1717 from one and the bullets aren’t the same as the xlx2 did you have to change the wires to make it work thanks
Everything You Need Is Here..
www.perfectpassrc.com/
Hey raz. Could you link the video where you show how to extract the bullets out of the qs8s. Thank you
Bro i swear the content you make is so good, I don’t get why you only have 40k subs. I mean the editing, the knowledge and the amusement!
Thanks bro!
Honestly I don't know maybe people just don't share my content as much with each other🤷🏼♂️😕
Because the builds are speed run cars I think if he bashed also he would probably have more but the content is all around good for both so who knows. I love this shit regardless lol
He's not about breaking everything he touches for a paycheck......big difference...cheers
great vid, epic picture quality and i learnt a few things! Jumper cables, duel lock and marine heatsink!
I've been learning tons about building from Raz, I learn a ton about Re-building from you :)
Thanks brother!
I'll call you later tonight..
Very niceeeeee
Hey kev! I also learnt a lot of thing both from you and from raz! You 2 are the best youtubers at the moment!
The marine heat shrink is definitely something I learned and going to apply to my future connections.👍🏼💯
I'm wondering what camera he is using.
Best joke I’ve even heard🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
My soldering jobs have went from "it works" to "WOW! I did this?!" So nothing but love Raz, I've been spreading the word, Such a clean build, nicely done!
Love the overview on the soldering. That's the next step i need to go with my limitless when i upgrade everything.
Man I wanted to hear the rest of the joke . great video.✌️
Came here for the build. Stayed for the joke. Poor pitbull 😂🤣
OK, I'm learning about soldering, how to setup batteries in parallel while it's really well explained with a excellently filmed video and learning a bad joke. I love your work ❤️
He wired his batteries in series.
@@jhughes2286 OK thanks, my mistake 👍
Excellent tutorial! My soldering always looks like crap ! Too much solder , too much flux
🤣 thanks again
You are an inspiration to RC people, awsome i learn something every time
i love the heat shrink with the glue. I've only ever known it to come in black untill now
I love your videos man. I live out in the beautiful countryside miles from a piece of flat concrete or asphalt that would be suitable for speed runs, but now I'm thinking about how I can build a "dirt road" speed runner. I put it all together in my head but the biggest hurdle seems to be tires. I'm skeptical the belted tires would hold up in the terrain at that speed.
Raz I love it I love ur channel awesome video bro
Great to watch and I’m glad you didn’t skip over the things you were doing . I usually tin both the wire and plug before joining but I have just done it ‘dry’ also and it seamed to be just as good 🤷♀️ . Keep up the good work 👍👌👍
Thank you Claire
Thanks for sharing 👍
Great video Raz! The anti spark connectors is the next upgrade for my limitless. And I will be copying your wiring with the new connectors.
Soldering job was fine! Neat and no melted connector!
I ignore what the rest say about your soldering skills🤥😳
When will you make carbon fiber center drive shafts for Kyosho Inferno GT2 VE?
I always make sure to plug the opposite connector into the connector I am soldering. It helps keep the bullets inside these style of connectors straight.
Correct only when you solder the male side :)
Nice Project 👌
Raz Im loving the content, starting watching a couple of months ago now. The way your sharing your knowledge is amazing and really entertaining. Great work.
Thank you will
Want 150mph rc car?
Me: i should get a real job
I'm on that EC5/IC5 level still🤣😎♥️! QS8s are the way to go though, I can see that.♥️😎
Dude your work is so clean!!🤩🤩
And I just wanted to say Your tutorial on sauttering was awesome I thought I knew how to sautter until Today you really helped advance my sauttering skills to to the Max so so we will be looking out for you just be on the lookout appreciate you greatly
Something Kevin Talbot really needs!
The saying "there's more than one way to skin a cat," actually does not refer to the feline cat, it refers to the catfish because there are so many different ways to skin it and clean it. I went about 30 years thinking they were talking about cats until someone told me that. Lol you're welcome.
i did something similar. i put the xlx 2 in the back on the right swung the motormount around 1717 1260kv in there with cooling and then we made our own GFK Lipo plate on the other side to rise and secure the 2 4s lipos. fits in there pretty much perfect. and no gluestuff on the lipos since i used the old straps to secure the lipos to the gfk plate and the plate is secured with.... well 3m Dual lock XD also the xlx 2 was raised to and screwed to a new gfk plate with rubber risers and 3m again on the plate to chassis.holds extremely well and i can even remove it all relatively easily
I’m still laughing from the joke… 😂😂
Sir you earned my respect and sub. I just recently purchased a Limitless should be getting here tomorrow. Your great step by step videos have really helped me to setup my Limitless. Thank you for what you do for the RC Hobby.
This series is like the speed runners Bible 😂. Ive seen them all multiple times. Thanks for all the help with everything. You helped soon much with my first speed run build. What Temps u have your solder iron set too?
Also I wanted to say that is that the information that you're putting out and the way that you're putting it out in a teaching and learning format we don't have a lot of the RC and the enthusiast doing it the way you do so I encourage you again to hang in there and If you keep putting content out like the way you're putting it out get out you will prosper from it that is a guarantee because information is power and you are putting out Is a lot of power about these RC cars Stay encouraged We will stay tuned in and Hopeful you will prosper soon
I've used heatsink with glue in it, I didn't know what it was called until now.
What receiver do you typically use?
As long as your not putting solder on the iron to apply solder to the connection your good.
Tinning the wire is always best. Less heat is best so prepare for success and it will go easy.
O and great video
The best content by far for the speed run community! Keep up the amazing work and thx for the knowledge! Btw, keep the jokes coming 🤙
killing me Raz.. You didn't finish the joke lmao
Just unbelievably amazing once again! Can’t wait for the next episode now! Thank you so much Raz!!!
Lookin' clean!
Raz where did you get that solder station
I use bigger diameter solder...fills faster...never had any issues
Great clean build setup. I did like the placement of the xlx2 so I adopted that👍🏼😁 Also, great job on the soldering. Those were some awesome tips. I like to plug the male and female connectors together so when the soldering is getting too 🔥🥵 the plug doesn't melt away. It stays in position. Almost done! Can't wait until the next video. Heat job.
Real nice video👍. Maybe a suggestion, buy youself (if you dont have one jet) a good air extractor with a filter. Fumes from soldering are really bad to inhale. And for some reason the smoke always goes right to my face😂😂
i had to take the durlock off the battery i made a stryene bottom in my tray works great thanks my friend great videos thanks for the help on alot of stuff keep the great videos comeing
Hi your channel is awesome and it's great that you help people with their problems!
I have a 1/10 carten t410r with a tp motor 4040scm and 4200w with a hobbywing Max6 on 8s.
And solid axeles in the front an rear.
I have now the problem that any time I accelerate the car goes to the left side an if I stop accelerating it drives to the right side.
It seems that ist lips to the right withe the rear axle. And the car ist very slippery and a able to drive. Would be great if you have any idea.
Greetings from Germany.
Quick question: would you need a cap pack with this setup and what are cap packs actually useful for or should I say Intended for and when are they suggested to be used?
What soldering iron do you use seems like a very powerful good unit.
Hehe Dual-lock for the win :D
Had a really nice deal for the stuff and have 55m (180ft) in stock now. Lets see how long I can manage with this, I imagine quite a while
Dude….that is a sweet build.
That's a great joke 🤣 gonna use that
Super clean looking setup
Where do you get the battery tray
Cool build. Great info.Hay do you know of anyway to get the toe-in out of the rear wheels on an X-Maxx? I built a speed runner XLX2/1100 X-Maxx I've gotten to 76mph and it has a bad speed wobble. Thinking if I remove the rear toe-in it would help.
Cheers👍🇨🇦👈🤠
Kudos dude! On the soldering, it came out nice. Like you said
Sometimes you feel like a nut,, sometimes you don't. 😆
Raz I enjoy watching your videos you really go into great details. You should build a few of those builds and sale them bet they won’t last long
I'm mega new to this whole thing so I'm sorry for probably asking a dumb question but why do we need two batteries? And why the cutting and soldering? I'm super new to this, last time I had an RC car was 15 years ago and I was drifting so I really have no clue why those things are needed
Quick question.. do you think this build could be used for drag racing ?? Love the products 🏎💥💥👀
You are a legend, ive always wanted a good rc car, what car should I start with?
Arrma 1/7
What DONT u like about the Xo1? Because it's what i have, therefore id like to work with.
@@choke666 Can't really go that fast with it, it flips.
@@PigglyWigglyDeluxe I would agree.
@@choke666 I can’t stand the play in the steering setup. I’ve replaced every part and some twice trying to sure up the play. I have gotten rid of most of it but I can’t get rid of all of it so I bought a slider off the Bay for a transplant.
Your really giving me some inspiration to build my Felony. love the videos
Another great video ty
How do you set up the jumper I’m still confused how to use the lipos after copying this, how do use set up the connections after solder?
The chassis you have there is quite reasonably priced. I looked up those Castle XLX2 esc's, ouch! ~$600 in my money (AUD).
Great vid btw.
This video is so good Bro. You do such a great tutorial on soldering. I struggle all the the time with my connections and and this gives me way more confidence. Thank you for your insights.
If you ask me a great build. I would have done a few things diffrently like not stacking dual lock to raise something and use foam or carbon plate instead or just making the esc harness for 2 packs instead of this to my opinion weird connector thats kinda pointless in my opinion. And primarly taking off the batteries out of the car for soldering just for convinience xD But still a great build
I can’t say anymore than a lot of others already have…. only that you keep the content coming, as it’s first class Raz👍 extremely good tutorial along with great editing…
Hopefully CZcams will start promoting your content again as these videos need to be seenu from would be a great loss🙏🏼
Thank you!
I love this build
I love this shit! I can't wait for more!
Awesome videos as usual man thank you very much also I want to know where you get your soldering station
Let's put this back on the feed!🏎💨🔥
I love it can I have it please you make my dream reality
Kindly at what temperature do you set the solder?
Thanks
Raz I know your not making these videos for me only ; but I want you to know that the way you put information is awesome. So I want to encourage you to hang in there your information alone is need. I know you made mention about CZcams paying you beans instead of steak it will come just hang in there but I thought it was just a sharing thing but now I know. I've been with your channel for a while but I learned something new I thought you were getting paid off of perfect pass and your carbon fiber accessories. I thought you had money to get Rc cars and just wanted to teach us new and secrets about the Rc game; and I'm saying that because I have about 150 rc cars but no channel. I'm thinking you gotta 9 to 5 and you were rich but like I said I learned a lot today
Hi Raz awsome info I just purchased the V2 and I need to see the video on how to extract the Qs8 bullets can you please send me the link thanks have a awsome Day or Night 💯👍🏾
Nice...!
Why 10 dislikes? People jealous or something? Lol of your knowledge and stuff? Maybe it's their ego? 🤣 i recently subscribed your channel. I'm just starting to get into the whole rc stuff but i know the knowledge you have and share is something you don't learn easily. Thank you for sharing!
hello
Hey buddy I have a mmx8s in my limitless what kind of batteries do I need buddy I had 6s 40000 mah 100c and the second pass I seen smoke the battery burned up that's all.i need help please
Hey think you mean 4000mah.? First you should proof that the 100c is the continuous discharge rate. If it’s continuous the battery can deliver 400 amps but what is the max your motor can pull? For very good informations go to rc explained on CZcams. That guy‘s got best knowledge in rc electronics. May you’ll get help there 🤘🏻
Is it possible to run a 4070 motor and still have the batteries side by side with the xlx2 im looking to build a drag/speed run rig with the limitless.
Have you thought about using just the connectors and not the whole qs8-s connectors
That short black cord on the 2 battery connector is that a harness ??? Where can I get it
Another stonking car ... Love it x
Hello you there thanks, for your assistance yes I like the blue car,how much does it cost is got to get one
Yes
super informative great stuff 👍
Great vid... Cant wait for the next one.
thanks for video
Great video where did you get the xt90 from?
What temperature should i put my iron on for qs8s?
@raz shifrin, hi love your videos was trying to do a build like this just order the 1717 from one and the bullets aren’t the same as the xlx2 did you have to change the wires to make it work thanks
One problem I’ve come up with- 1717 1650 kv wires ( bullets ) are to small for xlx2 , what’s the solution please Raz.
Question. Is the new max5 good enough?
Another great video Raz 👍👍
It’s probably in one of your videos, and I apologize in advance, but what is the best gps system i can get for my Limitless
Thank you for any help
im bew to this im building a limitless for drag race in 132 ft any suggestions on wht esc , motor n gear to get some great numbers ?
Hello you there, where did you get this blue car,where can I get one
Finnaly part 2!
Great content! Keep on doing such a good vids.
Nothing weird about "skinning a cat" when cat gut used to actually be a product everyone used. Antiquated for sure though lol.
great video
Raz nice content you are the man is this batteries setup parallel or series? I love what you do for the hobby thanks!🙂
Series
@@jhughes2286 thanks!