Great job! We followed your directions and we had the same piece broken. Ours was in 2 pieces so we Gorilla glued those back together and waited 24 hrs. before continuing the fix. Zip ties worked great. We reinstalled the visor and crossed our fingers. Hopefully it will hold for a long time. The toughest part was getting the cover off to get to the screws. Even though we were careful we still ended up breaking the cover in 2 places. Gorilla glued them back on and waited 24 hrs before reinstalling. The cover snapped back in place. Thank you for posting this video.
Hello Robert, just wanted to let you know how much I appreciate this video on the Nissan visor repair. My Nissan had the EXACT issue with almost the exact break in the clip. After watching your video I was able to duplicate the repair with the zip ties. You saved me a ton of money and I'm so grateful for your time you spent posting this video. Take care and thanks again!!
Worked like a charm!! Thank you so much. Great step by step instructions, photos/video, everything. Right down to the size of the screws. You made this so easily do-able. I was so frustrated with that thing not staying in place. You are my hero!
Robert - that was an awesome video - you have saved us over $500 Australian dollars for new ones or a trip to the wreckers,! The video shows exactly what we found and the cable ties went in just as shown. Love the tips on being patient and easing the visors open - very useful. Really appreciate the time you took to make video.
Thank you so much for your video. It was right on point for my SUV. I have an Infiniti JX35. All the same. I was able to fix my sun visor with your assistance and zip ties. It was very easy. In my opinion, the hardest part was removing the screw cover. Saved me money. Thanks again.
Thank you thank you thank you.. just picked up a used Pathfinder and this is one of the things the dealer did not take care of and I was able to do it in about 15 minutes. Great video!
Thanks, Robert! I just used your technique to fix my wife's pathfinder. There was 5 broken pieces of plastic inside. It broke such that the mechanism was on the same side as the vanity mirror. So I had to cut the plastic ring holding the mechanism in place so I could move it, carefully, to the other side so I could zip tie it up. Works well now. Thanks!!!
Paid the dealer 275 to fix dangling driver visor. One week later the passenger visor did the same thing. This video saved me hundreds. Thank you for taking the time to post. From start to finish it took me less than 15 minutes.
After watching your video and seeing what mine might look like on the inside (2013 Murano), I simply drilled a hole through that area and secured with a nut, bolt and a couple of washers. Works perfectly.
Thank you. Had the dealer replace 3 of these and all 3 broke. This is the best how-to video I've seen so far. Was gonna ask if it was still usable but I had seen that it was.
Thank you, Mr. Bencsko! I appreciate you taking the time to make this video. My little tab cover broke but that's a cheap part to replace compared to the visor itself.
Thank you for the video. If anyone else thinking of trying this fix, two things I noticed when I did it: 1) for the cover that hides the mounting screws, if you think of it as a D shape, the two side tabs are right beside the points, and 2) I used a teaspoon to pry open the two halves of the visor
Thank you so much Robert after watching your video I had the courage and insight to have a go at fixing my sun visors . My only variation was that I also wired them as well as using the ties thanks again and please do more videos you are such a blessing!
Robert - thanks for posting; much appreciated. I had the analogous problem on a Nissan Murano. Due to its slightly different design, I had to use 4 small zip ties (instead of 2 'regular' ones that you used), and I had to rip stitches and resew the fabric back around the visor. I chuckled at your comment at 7:02 about the 'poor design' with respect to the wiring. Thanks again - cheers,
Thanks so much for your detailed explanation and great videotaping. After paying for the driver-side fix at the dealership, got smart and CZcamsd. Thanks for not having me pay twice!!
Thanks so much 2015 Pathfinder visor is now repaired. Just took my time with being very careful and patient with the separation. One difference is that the arm was trapped by a piece of plastic, but I was still able to feed the cable ties through and pull them nice and tight. Thank you for your directions.
Creo que soy el unico de mexico gracias amigo por este video me ayudo bastante en 30 min se arreglo el problema y mis tapitas también salieron en dos partes se quebraron pero las pegue GRACIAS
Cannot thank you enough!! It’s been driving me nuts, and the dealership (Edison Nissan in NJ) wanted to charge me $480 to fix with a bumper to bumper warranty because they weren’t unusable. Such a joke. Thank you!
Great informative video. Thank you. After taking mine apart successfully I found the plastic around the metal clip you zip-tied was completely broken. Found a new one on an online auction site for one hundred dollars buy now. I appreciate the advice. Ps I laughed at your video as I am amazed at your ingenuity to fix this but hear the Smoke detector chirping in the background. I hope you had time to fix that too!
are you kidding... man wow thank you so much. Literally the most annoying thing ever and this worked 100%. Everyone just be careful taking off the plastic cover and also taking apart the video itself but otherwise this is straightforward. Amazing. Thank you Robert
Saw this fix for the '13 Pathfinder. Mine has the same problem and is a '15 and just slightly different than the '13, but still close. So, since the dealer wants $217 for a new one, I tried your method. Worked like a charm. A little bit off since the bracket didn't want to fit exactly flat, so the visor dosen't work perfectly every time but close to perfect. Thanks so much for posting this video!
Thanks for your video, had to make a slight modification due to how it was broken , but the zip ties work great on my 20014 Pathfinder. Looks like I will need to repair the other side soon. Thanks again for sharing your fix.
Dude! Perfect video. I just fixed both of my visors this evening in an hour. Finally, they’re not flopping and are secure to the roof. Unfortunately I wasn’t quite soft enough and snapped a cap in half. I’d rather pay for a cap vs. two more junky sun visors. Thanks again for the vid, saved me a ton!!
Thanks Robert, I managed to get three zip ties on mine. Heh, heh. Just for the heck of it I checked with the local dealer and he told me $300.00. Didn't even hesitate, I think he's heard of this problem before. Thanks again, much appreciated.
Thanks! It worked great. Nissan clearly has a problem with both the pathfinder and the QX60. I have the QX60 and it is exactly the same fix. Thanks Again - works perfect
Thank YOU! This worked great and my wife’s visor works great now. Hardest part was removing the screw head cover - mine broke into two pieces but I was able to tack them back in place with a little epoxy. Too bad Nissan didn’t think to make the clip mechanism from the same material as this cover :)
BUY THE REPLACEMENT PARTS, NOT A NEW VISOR!VISOR ILLUSTRATION:parts.nissanusa.com/nissanparts/index.cfm?action=replacement&groupid=N§ionid=964&jointvehid=18971&siteid=14NEXT WEBSITE:PARTSwww.nissanpartscheap.com/search_rushmore.php?dl_id=192&srch_str=sunvisorENTER YEAR AND MODELPARTS SELECTION COMES UP.
Thanks job done. My visor was broken on the on the other side in side. re watched your video snapped the bit that stopped me fitting it like yours. works prefect.
Came here to see how this visor comes apart. Im going to recover mine (the cloth is literally deteriorating) with suede to match the new dashmat. Very good video, Thanks!
Thank you so much Robert for your video, it was very helpful and very detailed. Again thanks for allowing us save about $180.00 which is the average cost in the Nissan Dealer. I think that Nissan should rethink the way the built some of the parts for our cars.
Save yourself so.e trouble and order them on Amazon, they are 50 bucks for the whole thing. If you don't want to spend the money this guys fix is awesome.
Awesome video. Had the exact same problem on my wife’s 2015 pathfinder. Mine broke a little bit differently but essentially I use the same steps he described in the video.
Mine eventually did break again just recently so it looks like I'll be out the $200. I hope they improved the new ones some over the ones I have but time will tell.
Brilliant. Fixed mine. There were certainly a few more bits of black plastic floating around in there than in your case but it's back in the car and hard up against the roof, yay!!!!. Will use very sparingly in future me thinks.......
Thanks for the great fix! It worked on my Infinity QX60's visor. I'll never buy a Nissan/Infiniti vehicle again. Too many instances of sloppy engineering.
Thank you! My wife was driving me nuts with this and I don't want to pay $185 so I followed your video instructions and it worked.
Great job! We followed your directions and we had the same piece broken. Ours was in 2 pieces so we Gorilla glued those back together and waited 24 hrs. before continuing the fix. Zip ties worked great. We reinstalled the visor and crossed our fingers. Hopefully it will hold for a long time. The toughest part was getting the cover off to get to the screws. Even though we were careful we still ended up breaking the cover in 2 places. Gorilla glued them back on and waited 24 hrs before reinstalling. The cover snapped back in place. Thank you for posting this video.
Hello Robert, just wanted to let you know how much I appreciate this video on the Nissan visor repair. My Nissan had the EXACT issue with almost the exact break in the clip. After watching your video I was able to duplicate the repair with the zip ties. You saved me a ton of money and I'm so grateful for your time you spent posting this video. Take care and thanks again!!
Worked like a charm!! Thank you so much. Great step by step instructions, photos/video, everything. Right down to the size of the screws. You made this so easily do-able. I was so frustrated with that thing not staying in place. You are my hero!
This is by far the best how to fix tutorial for Nissan Pathfinder visor on youtube. Thank you, Mr. Bencsko!
Robert - that was an awesome video - you have saved us over $500 Australian dollars for new ones or a trip to the wreckers,! The video shows exactly what we found and the cable ties went in just as shown. Love the tips on being patient and easing the visors open - very useful. Really appreciate the time you took to make video.
Thank you so much for your video. It was right on point for my SUV. I have an Infiniti JX35. All the same. I was able to fix my sun visor with your assistance and zip ties. It was very easy. In my opinion, the hardest part was removing the screw cover. Saved me money. Thanks again.
Thank you!!! I found this video just looking to see how exactly to take the visor off my wife's 13 Pathfinder. I kept watching and was able to fix it!
Thank you thank you thank you.. just picked up a used Pathfinder and this is one of the things the dealer did not take care of and I was able to do it in about 15 minutes. Great video!
Thanks, Robert! I just used your technique to fix my wife's pathfinder. There was 5 broken pieces of plastic inside. It broke such that the mechanism was on the same side as the vanity mirror. So I had to cut the plastic ring holding the mechanism in place so I could move it, carefully, to the other side so I could zip tie it up. Works well now. Thanks!!!
Paid the dealer 275 to fix dangling driver visor. One week later the passenger visor did the same thing. This video saved me hundreds. Thank you for taking the time to post. From start to finish it took me less than 15 minutes.
After watching your video and seeing what mine might look like on the inside (2013 Murano), I simply drilled a hole through that area and secured with a nut, bolt and a couple of washers. Works perfectly.
Thank you. Had the dealer replace 3 of these and all 3 broke. This is the best how-to video I've seen so far. Was gonna ask if it was still usable but I had seen that it was.
Thank you, Mr. Bencsko! I appreciate you taking the time to make this video. My little tab cover broke but that's a cheap part to replace compared to the visor itself.
Thank you for the video. If anyone else thinking of trying this fix, two things I noticed when I did it: 1) for the cover that hides the mounting screws, if you think of it as a D shape, the two side tabs are right beside the points, and 2) I used a teaspoon to pry open the two halves of the visor
I just saw your video and after years of complaining about the visor I decided to fix it myself! Thank you so much!!
Thank you so much Robert after watching your video I had the courage and insight to have a go at fixing my sun visors . My only variation was that I also wired them as well as using the ties thanks again and please do more videos you are such a blessing!
Robert - thanks for the video. Used this on my wife's QX60 and worked like a charm. Great ingenuity!
As a follow up, your tutorial did indeed help me fix my problem. Thank you! It worked exactly as you so aptly demonstrated. No more droop!!!!
Robert - thanks for posting; much appreciated. I had the analogous problem on a Nissan Murano. Due to its slightly different design, I had to use 4 small zip ties (instead of 2 'regular' ones that you used), and I had to rip stitches and resew the fabric back around the visor. I chuckled at your comment at 7:02 about the 'poor design' with respect to the wiring. Thanks again - cheers,
Thank you, Robert! Saved me a lot of time in discovery. I don't know how we used to fix stuff before the Internet and CZcams.
Thanks for taking the time to put together this video. I'm sharing it with my husband so he can fix my vehicle.
I just did this in and the visor is practically behaving like new again. Thanks for posting this video!
Thanks so much for your detailed explanation and great videotaping. After paying for the driver-side fix at the dealership, got smart and CZcamsd. Thanks for not having me pay twice!!
Robert....thank you! I have a 2015 Pathfinder and both visors are now drooping.. Nice job showing this fix! Will be trying out your solution ASAP.
Thanks so much 2015 Pathfinder visor is now repaired. Just took my time with being very careful and patient with the separation. One difference is that the arm was trapped by a piece of plastic, but I was still able to feed the cable ties through and pull them nice and tight. Thank you for your directions.
Followed your instructions and came up beautiful. Sunvisor was hanging down and wouldn't go back up. Was so annoying.
Thank you service.
Thank you so much. Finally I was able to fix after trying so many nonsense solutions from CZcams. Great job. Well done. Cheers man!
Just saved about $400 by watching this video. Nissan couldn’t even get a replacement right now because of supply issues. Thank you for this video!
Creo que soy el unico de mexico gracias amigo por este video me ayudo bastante en 30 min se arreglo el problema y mis tapitas también salieron en dos partes se quebraron pero las pegue GRACIAS
Thanks much Robert! Just completed the fix after watching your video. Really appreciate the step by step instructions, made it relatively easy to fix.
Cannot thank you enough!! It’s been driving me nuts, and the dealership (Edison Nissan in NJ) wanted to charge me $480 to fix with a bumper to bumper warranty because they weren’t unusable. Such a joke. Thank you!
Thanks for the great fix tip! I was able to fix the passenger side visor on my 2013 Infiniti JX35. The dealer was going to charge $300+ to replace it.
Great informative video. Thank you. After taking mine apart successfully I found the plastic around the metal clip you zip-tied was completely broken. Found a new one on an online auction site for one hundred dollars buy now.
I appreciate the advice.
Ps I laughed at your video as I am amazed at your ingenuity to fix this but hear the Smoke detector chirping in the background. I hope you had time to fix that too!
Your instructions are so clear and precise, thanks Uso appreciate your time and support. 💯💙
are you kidding... man wow thank you so much. Literally the most annoying thing ever and this worked 100%. Everyone just be careful taking off the plastic cover and also taking apart the video itself but otherwise this is straightforward. Amazing. Thank you Robert
Saw this fix for the '13 Pathfinder. Mine has the same problem and is a '15 and just slightly different than the '13, but still close. So, since the dealer wants $217 for a new one, I tried your method. Worked like a charm. A little bit off since the bracket didn't want to fit exactly flat, so the visor dosen't work perfectly every time but close to perfect. Thanks so much for posting this video!
Glad it helped. It will break again as mine did but it helps. I ended up getting some on Amazon and replaced them eventually
Thanks for your video, had to make a slight modification due to how it was broken , but the zip ties work great on my 20014 Pathfinder. Looks like I will need to repair the other side soon. Thanks again for sharing your fix.
Dude! Perfect video. I just fixed both of my visors this evening in an hour. Finally, they’re not flopping and are secure to the roof. Unfortunately I wasn’t quite soft enough and snapped a cap in half. I’d rather pay for a cap vs. two more junky sun visors. Thanks again for the vid, saved me a ton!!
I can't say it any better than the DEER CHASER ,,man you saved me a lot ,, thank you very much!!
Thank you Robert! it worked perfect and saved a bunch. I've gone thru 2 already thats $99+ a piece. Thanks again!
Thanks I'm glad you posted this video. I was just on ebay pricing a set but you saved the day.
Thanks for taking the time to document this repair. Excellent Job! 👍
Thanks Robert, I managed to get three zip ties on mine. Heh, heh.
Just for the heck of it I checked with the local dealer and he told me $300.00. Didn't even hesitate, I think he's heard of this problem before. Thanks again, much appreciated.
Thank you so much! Your video was very clear and easy to follow. You just saved me $200!!
Great job on repairing the visor, I used the same steps on our 2013 infinity JX35
I appreciate you posting this! Saved my father in law $200!
Thanks man! I kept putting off fixing this and didn't want to blow the money on a new one. Looks and works great!
Thanks!! I made some major brownie points fixing the shade on my wife's Pathfinder. Great video.
Amazing work. You just saved me $200 as well! There were all kinds of little broken pieces in both of my visors. Zip ties? Who knew? Robert did!
Thanks! It worked great. Nissan clearly has a problem with both the pathfinder and the QX60. I have the QX60 and it is exactly the same fix.
Thanks Again - works perfect
Thank YOU! This worked great and my wife’s visor works great now. Hardest part was removing the screw head cover - mine broke into two pieces but I was able to tack them back in place with a little epoxy. Too bad Nissan didn’t think to make the clip mechanism from the same material as this cover :)
Ah my problem exactly lol
Thanks for the video!!! Took me less than 30 minutes to fix my floppy visors on my 14 Pathfinder.
Just did this on my 2013 Infiniti JX35 ! Worked like magic ! Saved me 200$ ( CAN ) ! Thanks
Great thorough step by step video. I'll be trying this fix soon on my floppy visor. Thanks!
This fix saved me about $400NZD. Thank you!! One thing I found helpful was to unsolder the wires to the light first by popping out the mirror.
This fix worked like a CHAMP. Thank you, sir!
Worked like a charm. 2015 Pathfinder. Thanks for sharing this.
Thank you so much. Great step by step instructions, we followed your directions and it worked. We had the same problem.
THANK YOU for this. I was getting ready to spend $80 to replace my visor, but the ziptie method worked perfectly!
BUY THE REPLACEMENT PARTS, NOT A NEW VISOR!VISOR ILLUSTRATION:parts.nissanusa.com/nissanparts/index.cfm?action=replacement&groupid=N§ionid=964&jointvehid=18971&siteid=14NEXT WEBSITE:PARTSwww.nissanpartscheap.com/search_rushmore.php?dl_id=192&srch_str=sunvisorENTER YEAR AND MODELPARTS SELECTION COMES UP.
Great video, thank you for posting. Even more impressive that you did most of it one-handed.
Thanks for the great clear instructions. Worked like a charm!
Very smart fix.
It just worked with my Nissan 2014 Pathfinder.
Thank you very much.
Thanks job done. My visor was broken on the on the other side in side. re watched your video snapped the bit that stopped me fitting it like yours. works prefect.
I just did the same you did.
Thanks to you too.
Works great. Thank you for the easy to follow step by step instructions.
Great fix. I had the exact same problem and It came out fine with the way you described. Thanks for posting this!!
Great Fix - you saved me a decent amount of money - thank you Robert!
Came here to see how this visor comes apart. Im going to recover mine (the cloth is literally deteriorating) with suede to match the new dashmat. Very good video, Thanks!
Thank You , i followed your tube step by step and i fixed my car ,
Its really worked perfect now
bless you
Thank you for the detailed video! I just fixed my visor and saved some money.
Thank you so much Robert for your video, it was very helpful and very detailed. Again thanks for allowing us save about $180.00 which is the average cost in the Nissan Dealer. I think that Nissan should rethink the way the built some of the parts for our cars.
Just fixed mine!!!! Thank you very much sir!!!! Ingenious idea that works perfectly!!!
Perfect! This is exactly the info I was looking for. Thanks!
Mr. Bencsko, your idea is so great! Thank you very much for sharing useful & valuable idea! 👍
Shut the front door...it WORKED! Thanks! Great work!
Save yourself so.e trouble and order them on Amazon, they are 50 bucks for the whole thing. If you don't want to spend the money this guys fix is awesome.
You just saved me $200 and a ton of frustration!
Thanks for opening up visor. Appreciate the clear explanation.
Robert, I just fixed the visor on my +/-$20,000 Pathfinder with two zip ties worth approximately $0.20. WTH! Thanks for posting this video.
Just fixed mine!!!. Save me about 300 dls, You´re my hero!!! And completely agree with you! Nissan must have recall it!! Greetings from México!!
Thank you for this posting mine been going bad for 3 or 4 months also a common prolbem with crv Honda's..
You are a savior! I had someone quote me $300 to fix!!!
30 bucks on eBay. Like oem
This zip tie trick fixed my Visor too. Thanks!!
Thank you for taking the time to share your expertise. I was able to fix mine as well. Love CZcams!
Holy crap thank you for this video! This has driven me nuts!!!
Really appreciate you making this video!
Great video that helped me out. The fix warked like a charm. I thank you very much!
Awesome video. Had the exact same problem on my wife’s 2015 pathfinder. Mine broke a little bit differently but essentially I use the same steps he described in the video.
Mine eventually did break again just recently so it looks like I'll be out the $200. I hope they improved the new ones some over the ones I have but time will tell.
thanks so much....as with everyone else you just saved me some money too. I can't believe how cheaply those parts were made
Thanks so much for posting this. You saved me almost $130.
Worked like charm. Thanks for posting
Thanks so much, I watched your video and fixed my visor.
Brilliant. Fixed mine. There were certainly a few more bits of black plastic floating around in there than in your case but it's back in the car and hard up against the roof, yay!!!!. Will use very sparingly in future me thinks.......
Fixed my sun visor! Thank you!
Brother, you just saved me $128.00, Thanks
Thanks for the help!!! Got mine all finished
Thanks for the great fix! It worked on my Infinity QX60's visor.
I'll never buy a Nissan/Infiniti vehicle again. Too many instances of sloppy engineering.
cheap shite
THANK YOU...same issue with my 2014 QX60 and this help me fix it!!!
Thanks! Great fix. I hope it lasts a long time.
Thank you. This was perfect and worked like a charm.
Thanks so much man! Just did this and while their not perfectly factory tight as least thier not just flopping around now!
just fixed both of mine, thank you sir! saved me $500 usd!