Xbox Series X/S Controller How to fix Drifting Sticking Thumb Stick
Vložit
- čas přidán 24. 07. 2024
- Xbox controller's left thumb stick was drifting and getting stuck. In this video I'll show how you can try to easily fix it using two methods.
Xbox ONE S/X Controller: amzn.to/3KO3GRq
Great Screwdriver Set w/ torx bits & pry tool: amzn.to/3CUhlEK
Security Torx Bit Set: amzn.to/3QjlyEM
Prying and Opening tool kit: amzn.to/3wTsj9J
Compressed Air: amzn.to/3wTsj9J
Time Stamps:
00:13 - Fix #1 - Blow out and clean the thumbstick
00:58 - Check to see if still under warrenty
01:04 - Remove back panels / handles
02:27 - Removing the torx security screws
04:42 - Remove face plate
05:11 - Clean with brush, cotton swab and alcohol
06:35 - Final dusting and inspection
06:48 - Reassemble
Date of Activity: 9/2/22 - Jak na to + styl
Used this video about 8 times in the last few months, love it so much ❤❤
These controllers are constantly getting sticky thumb sticks. I never get any of these issues from cheap controllers. You would think it would be the other way around considering how much these controllers cost. I would never buy another one. I have had three and they have all had sticky thumb sticks in no time. They are a pain in the arse to send back too. Thanks for the video.
Hello. Is there a general repair/cleaning kit you’d recommend for the Xbox one controller? The left joystick won’t click so I watched this video hoping for an easy fix. I looked at what you listed and it’s a bit intimidating for a noob like me lol. Thanks
lego orange piece for separating the plastic
I didnt even think of using a computer duster! Silly me. Thanks for the help!
My left thumbstick moves the character or whatever else I am trying to move with the thumbstick slowly. When I take the face plate off it moves like it is suppose to. I wonder how I fix that problem
I'm not sure, not had that problem. Did you end up fixing it?
My left joystick is stuck on going left. Please help me I've already tried cleaning it.
So what if you replace the joystick and get double inputs. If i flip the joystick up. It moves two places on the menu. And ive completely resoldered a brand new joystick and still double input. Anyone know what on the board would cause this?
Double check that the interior pieces on both joysticks are fully operational (both will click when pressed down) because on mine, it was mostly stuck depressed, and moving it unclicked it, and the switch from click to unclick will register as a flick and give double inputs. Wound up fixing it by using a set of angled tweezers to pull the plastic pieces up on the inside
Yeah did not do jack for me.
Sometimes you’re in too deep, like Omar Epps. I’m that case, time to hit up Amazon.
Sad demonstration of fixing a Xbox controller you didn't have the decency at the end to test it it was very messy and you're breaking screws you can do better
But you liked that thumbnail though, right? haha. Thanks for the feedback. It still works, but it was my first time trying to film a controller fix. I'm sure I'll have another chance down the road.
@@weekendhomeprojects hey you helped me. 😊