@@TryThisDIYFix I havent tried the alcohol yet, also wired controllers are built a bit differently than the wireless controllers like yours, I couldn't find the grey part you said to take out
Done all of these, I can’t even browse the Xbox Home Screen. At this point I’m just sucker punching my controller every time it stops working. That’s the only thing left I haven’t done.
That stinks. If you’ve tried all these techniques then it might be time for a new controller. You can sell this one for parts on eBay to help offset the cost.
Thanks... As a mom of three gamers I couldn't afford new controllers so I followed your instructions and Bam works like new!! So easy which instructions I taught my 10 year old how to do it also
Great tips to save some cash not having to buy a new controller. Keep up the great work as the goal is to inspire others to fix things themselves and build something awesome!
Great video, I had a problem with a new Xbox series controller that started drifting and moving fast. The fix for me was to open the green part of the right stick. Remove the sensor and soaked it in alcohol. Then I brushed where the sensors sit at. Replaced the sensors after drying out. Snapped the green pieces back. Put controller back together and it runs great again.
Accidentally broke my elite controller, and my original Xbox controller had the drift. Removed that plastic piece and replaced the thumb sticks and D Pad from the Elite's and it's like a whole new controller. Without the Back Pedals, but it saved me lots of money.
[Alternative - First Aid Fast Solution] Take a Straw, Flatten it so it looks like this [] fit it in the analog stick from the side while holding it down and blow really-really hard from the other end of the straw (or pull air, up to you... but be careful... and don't overdo it). Enjoy a Drift-Free experience along with a really bad headache for a moment. PS: Join Us if that Helped ^^
By the way. This doesn’t void warranty. Stickers that say void warranty if removed are a lie. It’s just to spook you from repairing it yourself. You have the right to repair it yourself.
@@TryThisDIYFix How much are parts even worth though? And wouldn’t it be better to save an old controller for the parts just incase you need up needing a part on your brand new controller?
thank you so much for sharing this!!!! fixed both of my controllers super quick thanks to this. My first attempt didn't work, but using alcohol plus hitting each opened door of the analog with a 100psi compressor air gun fixed it right up. I know a 100psi is not feasible for most... MAYBE a can of compressed air is strong enough?
Repair Shops hate him! One simple trick to fix controllers. Jokes aside can't believe this actually worked lol There was just an insignificant amount of hair near the analog stick
Hey Nathan, yes you will need a special screwdriver. I have one down in the description if you want to check that out. Or you can grab one at a local hardware store. I’ve used mine tool multiple times after I got it so it might be a good investment.
Hi I do not have the tools to open it up and get all intricate but what I am going to do is fabricate myself some covers that slip around the stick and cover the hole where stuff can go in
To simply not void warranty heat back stick with a hairdryer and peel it down . When done heat back up peel it back . Bam no poking holes . No different than removing stickers on things .
@@TryThisDIYFix I tried turning up the dead zone and it doesn’t seem to be drifting anymore! Thank you, I honestly wouldn’t have thought of turning that up to fix it.
Thank you so much for your 1st 2 bits of advice that worked so much my controller the more I powered it on didn't start drifting or add goofy thank you again
So I had a right stick drift bad and then a failure, where it wouldn't move at all. Tried alcohol to no avail... Ended up fixing by Pulling up on the joy stick and pushing back down on it...did this few times... then took a straw and bent flat n slid in groove arpund stick and blew air all around. WORKS LIKE NEW. Just some other tips to try before takin controller apart
Wow, thanks. I never thought removing that grey piece inside the Xbox controller would solve the drift, and yet it did. Edit: No, this didn't really work. It just made it ten percent less severe.
@@shanec4494 I haven’t heard that myself. But you never know. I think if you had to fix the drift and loose the click it might be worth it. Have you experienced it?
@@TryThisDIYFix not myself, just have read it in the YT comment section on a few different videos, which has made me hesitant to try it. So many games use the click now, especially for sprint.
@@ratman7212 No, you can try the first fix by just putting the rubbing alcohol on the thumb-stick. But if that doesnt work then yes I would that taking it apart.
You cannot fix a drift with rubbing alcohol as you shown as the analog is under (potentiometer) so it is impossible to clean that way. You have to open your controller
Hey Onasazi, you are probably correct. The rubbing alcohol will clean any debris that could be causing stick drift, but if you are having mechanical problems then you are correct and will have to open it up.
This is all well and good if the controller is just dirty... My stick is drifting because the piece inside doesn't stick in the neutral position, like the parts are wearing out... Any fix for that, or am I screwed?
Hmmm. I think you can order those parts. I also think you can pop the little square off. But it could be time for a new controller as well. Sorry about that.
Oh my gosh thank you so much this worked it save me 30 bucks on My controller I woke up in the morning and found my controller upside down on the ground and it was having drift and I just got that controller so thank you so so so much for helping me fix my controller
I used the little screw set to unlock the controller and then I used that set to help pry the controller open. I have a link in the description for these items if that helps.
rubbing alcoho is not a good idea. ive done this on two different types of controllers and it usually may work at first, but it tends to only make the drift worse. you can try it but i definitely dont recommend using rubbing alcohol
@@boxedlikeafish3909 I would also be weary of olive oil. That has a chance to drip into the controller. I recommend sticking with rubbing alcohol if possible.
BRO YOU SAVED ME. I was about to fix it the hard way aka yeeting it at wall or the floor. I mean it still works it's just it won't work after a couple of seconds lol
Have a question does this work for me cuz my Xbox controller doesn’t have any problem in any other games more than COLD WAR and i tried Different deadzones but its still bad it doesn’t fix it it just like Drift so fast its like im doing 360 ngl
Yeah that is weird. My problem was w fortnite and apex but worked w warzone. So I cleaned it and it worked in all of them. Cold War could be really sensitive so it might need that cleaning done so it will work correctly.
Sorry about that. I would recommend opening it up to see if there is something broken or misplaced in the controller. You might be able to fix it if it isn't too far gone. Let me know if that works.
I stopped using my Xbox for a few years hoping that would fix it.... especially since there's nothing to play on it. Starting drifting as soon as I powered it up 😂
I opened up my friend's controller to try and fix her drift issue and found the little gray piece ( 4:31 ) missing on the left stick altogether. In that case, does she need to buy a new controller or do they make replacement little pieces like that? 😭😅
@TryThisDIYFix it was bought used from gamestop and it looked like they opened it up before so when I opened it, the piece was already missing, I didn't remove it and I assume they did or didn't notice it missing Also thank you for the reply!
Hmmm, not that I know of sorry. It’s a unique tip as well. I had to get the kit that I have in the description in order to get it open. Sorry about that.
I have a Power-A brand wired Xbox One controller for Xbox/PC. The left thumb stick isn't sticked or anything, it's just loose. It's a relatively new controller, and it's been knocked off my chair or bed (a 1 and a half to 2-foot drop at most). When I rest my thumb on the thumb stick, I can easily wiggle it around, causing slight input in some directions. When I apply pressure and move the stick along the upper right quadrant, I have increased resistance and a squeaking noise. Is this something that opening the controller can fix or is the stick broken? I am a little afraid to open it up if I don't need to, since I fear breaking some other part of the controller.
I hear ya! I was worried as well to open it up. But I’d recommend doing it and seeing what’s going on. It sounds like it might be broken a little bit or there could just be something in their hindering it from moving correctly. Open it up and see. Let me know what you find.
@@TryThisDIYFix So I popped it open, which the PowerA controller was surprisingly easy with only 8 screws to open it and then 2 screws (1 by each thumbstick) remove the control board with rumble and sticks fully attached. I plucked the left thumbstick cover off and the whole mechanism is a small cube with a short metal post. it's hard to see into the cube at all. there's still the little bit of wiggling and the squeaking noise is coming from the up/down axis. I see no way to open the cube itself, it appears to be soldered to the board. 2 of the sides look like they might be made of plastic. I feels like something might be stuck in there and preventing the stick from centering fully and causing the noise. I'll have to see if I can find a way to open the cube housing the mechanisms. Thanks for the video and the advice! I'll have to see what else I can learn about this particular brand.
@@adopt8202 That is weird. It wasn't doing this before? I dont think putting the rubbing alcohol on it should make it short out or turn off. Maybe check the connection?
I do the same thing for a PS4 controller here: czcams.com/video/X2MlzWXhB-M/video.html
How do I fix a wired controller drift?
@@kittycatwithinternetaccess2356 it should work the same. We’re you able to try these fixes?
@@TryThisDIYFix I havent tried the alcohol yet, also wired controllers are built a bit differently than the wireless controllers like yours, I couldn't find the grey part you said to take out
@@kittycatwithinternetaccess2356 yeah try the alcohol first and let me know.
@@TryThisDIYFix it didnt work
Done all of these, I can’t even browse the Xbox Home Screen. At this point I’m just sucker punching my controller every time it stops working. That’s the only thing left I haven’t done.
That stinks. If you’ve tried all these techniques then it might be time for a new controller. You can sell this one for parts on eBay to help offset the cost.
Throw it against the ground, hope it works again. Youre gonna have to get a new one
@@_R_R_R I did that for my old shitty ps3 Walmart remote, worked like new.
@@_R_R_R remember me reed:)
Contact cleaner?
Thanks... As a mom of three gamers I couldn't afford new controllers so I followed your instructions and Bam works like new!! So easy which instructions I taught my 10 year old how to do it also
That’s awesome!!!! I’m glad it worked for you!
Thank you man, my controller is super broken and this did the job!
That’s awesome! I’m glad it worked!
@@TryThisDIYFix po
Great tips to save some cash not having to buy a new controller. Keep up the great work as the goal is to inspire others to fix things themselves and build something awesome!
You got it! Thank for checking it out!
Great video, I had a problem with a new Xbox series controller that started drifting and moving fast. The fix for me was to open the green part of the right stick. Remove the sensor and soaked it in alcohol. Then I brushed where the sensors sit at. Replaced the sensors after drying out. Snapped the green pieces back. Put controller back together and it runs great again.
That’s awesome! Thanks for letting me know! Feel free to subscribe that will really help me out. Thanks for watching!
Cool. But for how long?
@@sO_RoNerY this last one if fixed has lasted about a year. Thanks for watching. Feel free to subscribe for more helpful videos.
I tried that but unfortunately it didn't work for me
@@pvinnie.73 How long have you had your controller.
I went through many videos to fix my stick drift, but this guy explains it so well. Keep up the good work💯💯
Thank you! I’m glad it worked for you!
Thanks again! Feel free to subscribe for more helpful videos!
Yo thanks so much! I have an elite controller so after 2 years using it I knew there was a fix! Saved me 60$💀
That awesome! I'm glad it worked!
Accidentally broke my elite controller, and my original Xbox controller had the drift. Removed that plastic piece and replaced the thumb sticks and D Pad from the Elite's and it's like a whole new controller. Without the Back Pedals, but it saved me lots of money.
@@killopticpony that’s awesome! I’m glad you were able to fix it!
@@killopticpony Thanks again for watching. feel free to subscribe for more helpful videos!
[Alternative - First Aid Fast Solution] Take a Straw, Flatten it so it looks like this [] fit it in the analog stick from the side while holding it down and blow really-really hard from the other end of the straw
(or pull air, up to you... but be careful... and don't overdo it).
Enjoy a Drift-Free experience along with a really bad headache for a moment.
PS: Join Us if that Helped ^^
Wow, that’s a great idea. Thanks
Why do you not wanna overdo it?
@@Bean_Ernesto44 Do you don't pass out or inhale any loose parts
Thank u for dat
My man is still responding after 2 months
Always man! Thanks Kaleb.
He will probably be doing it after 4 years
@@hiwooq5505 you know it! thanks again for watching. Feel free to subscribe for more helpful videos, it will really help me out!
thanks again for watching. Feel free to subscribe for more helpful videos, it will really help me out!
@@TryThisDIYFix bro i commeted this a year ago lol.
Thanks my guy I almost took apart my controller possibly breaking it when all I had to do was change the dead lock settings
You got it Eleos! I'm gad that helped! And thanks so much for the sub!
How do you change the deadlock settings
@@sh4dd3x they are usually in the settings where the controls are some games don't have it
@@sh4dd3x I believe it’s different in each game but you can go into the settings in game and change them.
@@TryThisDIYFix oh your talking about dead zone i thought that there was something in the Xbox settings
I’m a kid by the way and this fix actually worked thank u so much 🙏🙏🙏🙏🙏
That's awesome! I'm gad it worked!
@Jaden Daniel haha. thanks man!
@Jaden Daniel ....😐😐😐😐😐😐😐😐
By the way. This doesn’t void warranty. Stickers that say void warranty if removed are a lie. It’s just to spook you from repairing it yourself. You have the right to repair it yourself.
Hmmm. Good to know. Thanks.
Mine still drifts I took the plastic piece out cleaned with 91% alcohol and still drifts what else could it be
Hey Brad, sorry about that. You could try to clean it again. But it might be time to get a new controller. You can sell this on for parts on eBay.
@@TryThisDIYFix How much are parts even worth though? And wouldn’t it be better to save an old controller for the parts just incase you need up needing a part on your brand new controller?
@@deagle2yadome696 that’s a great point! Yeah it’s probably a good idea to just keep it then!
This might work but there’s a little plastic thing in the joystick and if you take that out it could fix it it’s really small
@@t-dog9319 yes that’s correct. I show you how to remove it in the video.
thank you so much for sharing this!!!! fixed both of my controllers super quick thanks to this. My first attempt didn't work, but using alcohol plus hitting each opened door of the analog with a 100psi compressor air gun fixed it right up. I know a 100psi is not feasible for most... MAYBE a can of compressed air is strong enough?
Nice. I’m glad it helped! And yeah I’ve used a can of compressed air.
Damn this guy is an awesome guy he helped me and when i came to comment he literally answered everyone much thanks
You got it! I’m glad it helped! Thanks for letting me know!
Thanks again for watching. Feel free to subscribe for more helpful videos.
THANK you so much. Got the left stick drifting up. This helped. Saved me 50-60 Euro for a new one.
Yes! That’s great. Thanks for letting me know. Feel free to subscribe for more helpful videos. Thanks
I've heard that in some cases contact cleaner also does the trick, that's what normally fixes the notorious joycon drift
Oh cool. I’ve never heard that. Thanks for letting me know!
he sounds like Mathew Mcconaughey when he gets focused: 3:16 "one riiiight heeere and one riiiight heeere" 😆👏
Haha! I appreciate that! I’ll take it!
Thank you you don’t understand how much you helped
Awesome man! Glad it worked!
I think he know because the same problem happens to him😂
thanks again for watching. Feel free to subscribe for more helpful videos, it will really help me out!
Repair Shops hate him! One simple trick to fix controllers. Jokes aside can't believe this actually worked lol There was just an insignificant amount of hair near the analog stick
Nice! That’s awesome! I’m glad it worked!
Did you need a special screwdriver? Just popped the side panels off and the screw head is a 6-point star.
Hey Nathan, yes you will need a special screwdriver. I have one down in the description if you want to check that out. Or you can grab one at a local hardware store. I’ve used mine tool multiple times after I got it so it might be a good investment.
Yeah I just got a small drill bit and broke those small pointy bits off. After that it was pretty easy.
@@stinkystinky8235 oh wow.
Thanks for video I keep going into nose manuals for no reason on skate 3 from my stick drift but now I know how to fix it
Hey I’m glad you were able to fix it! Thanks for letting me know!
This is great, I may need to try this same concept in my son's xbox controller someday
Yeah! Thanks man!
never knew what the controller 'deadzone' meant until now. thanks man. :-)
You got it!
Is 91 percent okay to use or do I need 70 percent or lower
I think 91% is better if you have it. But I believe both work well.
I just poured a tiny bit and moved it up and down
@@funboy1014 did it work?
@@TryThisDIYFix yes I had a little stick to where it registered as me pressing twice on it
@@funboy1014 That is great!
Hi I do not have the tools to open it up and get all intricate but what I am going to do is fabricate myself some covers that slip around the stick and cover the hole where stuff can go in
That might work. You can also try to just put rubbing alcohol on the sticks. I do have a link in the description for a cheap tool that will help.
Your so underrated man you have something going stick to it!
Thanks man! I really appreciate that!
You’re*
@@scrumdiddly3963 ha, thanks.
I can’t tell if your making a joke “stick with it” because this video is for fixing your sticks or I’m over thinking it :/
@@Panda-yj9zb you’re*
To simply not void warranty heat back stick with a hairdryer and peel it down . When done heat back up peel it back . Bam no poking holes . No different than removing stickers on things .
Hmmm that’s an interesting idea. Never thought of that.
Specifically in bf 2042, the dead zone absolutely worked. Thanks cause I almost bought a new controller just for that issue. Appreciate it!
You got it! Thanks for watching! Feel free to subscribe for more helpful videos!
Thats what i play...but its Chivelry 2 that caused this problem
Well hopefully the toothpick and compressed air tip works. Ill let you know if it does or not
I hope it does as well. Let me know.
The rubbing alcohol worked thanks
That’s great! Glad it worked!
thanks again for watching. Feel free to subscribe for more helpful videos, it will really help me out!
actually works , it was the alcohol for me
That’s awesome! I’m glad it helped!
Thank you!! I haven’t even tried this yet but I’m sure it will work
Awesome. I hope it does. Let me know.
@@TryThisDIYFix I tried turning up the dead zone and it doesn’t seem to be drifting anymore! Thank you, I honestly wouldn’t have thought of turning that up to fix it.
@@raceeht that’s awesome! I’m glad it worked!
Thank you so much for your 1st 2 bits of advice that worked so much my controller the more I powered it on didn't start drifting or add goofy thank you again
You got it! I’m glad it worked! Thanks for letting me know! Feel free to subscribe for more helpful videos.
@@TryThisDIYFix already done brother thanks again
@@rjcamacho1977 thank you!
no way you just helped me what a legend
Thanks man! I’m glad it worked!
thanks again for watching. Feel free to subscribe for more helpful videos, it will really help me out!
So I had a right stick drift bad and then a failure, where it wouldn't move at all. Tried alcohol to no avail... Ended up fixing by Pulling up on the joy stick and pushing back down on it...did this few times... then took a straw and bent flat n slid in groove arpund stick and blew air all around. WORKS LIKE NEW. Just some other tips to try before takin controller apart
That’s a great idea thanks for letting me know! I appreciate that!
Wow, thanks. I never thought removing that grey piece inside the Xbox controller would solve the drift, and yet it did.
Edit: No, this didn't really work. It just made it ten percent less severe.
That’s awesome! I’m glad it worked! You can subscribe for more fixes if you’d like. Thanks
I've heard if you remove that clip it affects the click... any truth to that?
@@shanec4494 I haven’t heard that myself. But you never know. I think if you had to fix the drift and loose the click it might be worth it. Have you experienced it?
@@TryThisDIYFix not myself, just have read it in the YT comment section on a few different videos, which has made me hesitant to try it. So many games use the click now, especially for sprint.
@@shanec4494 yeah I hear ya. It’s your call. Try the other fixes before you remove the clip to see if those will fix it.
Thanks man I almost bought another controller, the alcohol technique worked for me
That’s awesome! Thanks for watching! You can hit the subscribe button for more helpful tips. Have a great day!
what issue were u having sir?
Just earned a sub under rated🔥🔥🔥
Thank you! Glad it worked!
What about the right thumb stick? Should i remember the black piece?
Yes you can.
Would this work if my character looks up by itself? Btw I’m not sure what’s wrong with my right thumbstick
Yes It should. As long as the thumbstick isn't completely broken one of these methods in the video should work. Let me know if it works for you.
That's what with my past 3 controllers
@@TryThisDIYFix do I have to take apart my controller?
@@ratman7212 Sorry about that!
@@ratman7212 No, you can try the first fix by just putting the rubbing alcohol on the thumb-stick. But if that doesnt work then yes I would that taking it apart.
You cannot fix a drift with rubbing alcohol as you shown as the analog is under (potentiometer) so it is impossible to clean that way. You have to open your controller
Hey Onasazi, you are probably correct. The rubbing alcohol will clean any debris that could be causing stick drift, but if you are having mechanical problems then you are correct and will have to open it up.
Duuude, I was playing destiny and I kept running into walls. Thanks!
I’m glad it worked!
I’m playing destiny while watching this😂
That’s awesome!
My issue now. Just started the video lol
@@dayzreloadedpve thanks again for watching. Feel free to subscribe for more helpful videos, it will really help me out!
Tbh the others videos on to fix drift usually requires tools but the alcohol trick work thanks man😀
That’s awesome! I’m glad it worked for you!
I couldn’t get the secret chest in space on deep stone crypt because of the drift😂(I’m secretly crying)
Ahh man that stinks! We’re you able to fix the drift with this video?
@@TryThisDIYFix yes!! Thank you! You saved me $60
@@Sonny2299 that’s awesome!
Dang, did you go back? I'm still trying to get my heritage
@@bobafett2881 yup, still didn’t get a heritage yet. I got a titan Chestplate if I recall
What if the left joystick is stuck and won't click, which means you can't sprint in games?
That was one of my big problems! This video should help.
Thank you so much
You got it Hunter! Thanks for watching!
thanks again for watching. Feel free to subscribe for more helpful videos, it will really help me out!
Thanks alot bro dont stop youtube you saved me a controller😭💀 with the deadzone fix! Subbed
You got it! Thanks for the encouragement as well! Glad it worked! You can subscribe for more videos if you’d like. Thanks again.
Thank you so much this worked with the rubbing alcohol 😊
That’s great! Thanks for letting me know!
Thanks again for watching. feel free to subscribe for more helpful videos!
This is all well and good if the controller is just dirty... My stick is drifting because the piece inside doesn't stick in the neutral position, like the parts are wearing out... Any fix for that, or am I screwed?
Hmmm. I think you can order those parts. I also think you can pop the little square off. But it could be time for a new controller as well. Sorry about that.
THANK YOU BROOO
You got it! Glad to help!
Oh my gosh thank you so much this worked it save me 30 bucks on My controller I woke up in the morning and found my controller upside down on the ground and it was having drift and I just got that controller so thank you so so so much for helping me fix my controller
That’s awesome man. Thanks for letting me know! I’m glad it worked!
Thanks again for watching. feel free to subscribe for more helpful videos!
THANK YOU IT WORKED LIKE A CHARM 😭😭😭😭
Awesome! I'm glad it worked!
thanks again for watching. Feel free to subscribe for more helpful videos, it will really help me out!
Gone through 2 controllers with drift over the passed 6months driving me mad awful controllers never had any issue with my PlayStation controllers
Yeah it does happen a lot. Hopefully these fixes will help. Feel free to subscribe for more helpful videos. Thanks.
If you have a PS4 controller that is doing the same thing, check out this video: czcams.com/video/Lu1mknlpdRI/video.html
Great video. I have a question, what do you use to get the side panels off?
I used the little screw set to unlock the controller and then I used that set to help pry the controller open. I have a link in the description for these items if that helps.
"Cries without the screw driver"
Sorry about that. I have a link in the description for one.
This helped me ! Also the screw where the batteries are you have to pop through the label to get to it ! I was wondering where it was lol
Awesome! I’m glad it helped. Yeah I should have pointed that out! Thanks for letting me know. Feel free to subscribe for more helpful videos.
rubbing alcoho is not a good idea. ive done this on two different types of controllers and it usually may work at first, but it tends to only make the drift worse. you can try it but i definitely dont recommend using rubbing alcohol
Thank you Sketchbandit. I appreciate the input.
When you dont have rubbing alcohol 😭
Sorry about that. I just put a link for some in the description if you want to get some from Amazon, or you can grab some at most stores.
@@TryThisDIYFix yea ill do that tomorrow thanks for the tips though 🙏🙏
@@tyronesmith8200 you got it!
I don't have the alcohol does it work with olive oil?
@@boxedlikeafish3909 I would also be weary of olive oil. That has a chance to drip into the controller. I recommend sticking with rubbing alcohol if possible.
Dont have this isssue have a xbox one x but i think the there a delay in button pushing have an answer for this
Hmm. I don’t currently. Does it happen on all your controllers? You could check the settings to make sure.
Mines drifting upwards but wen I pull it it feels much more loose the the right one any suggestions??
Hmm. I’d open it up like in the video and see what it looks like. You might find something broken.
Opening and cleaning fixed my problem with drifting ^-^
Thanks awesome! Thanks for letting me know! Subscribe for more helpful videos. Thanks
Work fine for my two controller PowerA and Cheesha.
That’s awesome! Thanks for letting me know! Feel free to subscribe for more helpful videos. Thanks again.
BRO YOU SAVED ME. I was about to fix it the hard way aka yeeting it at wall or the floor. I mean it still works it's just it won't work after a couple of seconds lol
That's awesome man! I am glad it worked for you! You can subscribe for more helpful videos! Thanks again for the comment!
What type of screw driver do you need though? Not sure if you meantioned it
It’s a phone or computer set. I have a link in the description that should help.
0:53 @@TryThisDIYFix
My controller has drift and I click the left joy stick to stop it temporarily
Yeah I hear ya. Try these fixes and it should help! Let me know if it does.
when i was suing my controller it kept moving whenever i let go it didn't stay to the side
Yeah you need to try these fixes and let me know it if works for you. I hope you can fix it.
Test before complete reassembly
Yes. Good call.
Thanks man! Got my buttons unstuck and working again thanks to this vid.
That’s awesome! Thanks for letting me know! You can subscribe for more helpful videos. Have a great day!
I wanna do it but don’t have the right screw
Yeah that's tough, I did link a small screwdriver set that I believe will have the screw head you need. Its linked in the description.
dude your idea about the dead zones saved my controller for gta on xbox one Thanks 😊
Awesome! You are welcome! I’m glad it worked. Feel free to subscribe for more helpful videos. Thanks.
Well it worked but we'll see how long tho but great tip. I laughed so hard when it worked
That’s awesome! I’m glad it helped! Thanks for letting me know. Let me know how long it lasts.
😂😂😂 it lasted a whole two minutes.
@@tanyellburns7247 dang I’m sorry about that. Sometimes that happens. Mine has stayed fixed for a while but I do know some that won’t hold.
Thanks so much the rubbing acholo work
You got it! Thanks for watching! Feel free to subscribe for more helpful videos.
Have a question does this work for me cuz my Xbox controller doesn’t have any problem in any other games more than COLD WAR and i tried Different deadzones but its still bad it doesn’t fix it it just like Drift so fast its like im doing 360 ngl
Yeah that is weird. My problem was w fortnite and apex but worked w warzone. So I cleaned it and it worked in all of them. Cold War could be really sensitive so it might need that cleaning done so it will work correctly.
@@TryThisDIYFix thx
@@zer0051 I hope it helps. Lmk.
How do you take off the side clips
I just used my hands but you can also use a piece of plastic that can fit in there to help you open them up. But be careful not to break the clips.
Omg!!! I been looking for you for about 5 months.. thanx for these tips.. my controller works now
Hey Kalli Boy, I'm glad it worked! And I'm glad you found the channel!
thanks again for watching. Feel free to subscribe for more helpful videos, it will really help me out!
Im going to see if this works but u just got a new sub ur so underated man. Thanks man
Awesome! Thank you! I hope it works!
@Dyix 👍 Yes i did work but sometimes it drifts so do it about every 1 hour
Uhm.... I threw mine at the wall bcoz of my ping and then the right stick started sticking to the right bottom corner every time I take it there
Sorry about that. I would recommend opening it up to see if there is something broken or misplaced in the controller. You might be able to fix it if it isn't too far gone. Let me know if that works.
Do you know what type of screwdriver is used to get the screw on the back of the controller? I can't find any that fit
Hey Kyle, I have a link to a screwdriver that will work in the description. I think it’s called a t9 or t10.
@@TryThisDIYFix ok, tysm
@@kyleesslinger8890 you got it!
You’re the best man exponent my controller was sticking I’m gonna subscribe because you helped me thank you so much
Thank you! And I’m glad it worked!
Mine had a little tiny leaf inside of it
There you go! I’m glad it helped!
Your video saved me today thank you very much.
You are welcome! Thanks for watching! Feel free to subscribe for more helpful videos.
My left stick is not rotating normally now and it locks in plave
You can try taking it apart and cleaning it.
The hell is compressed air also the stick drift thing kinda worked its still there but its kinda gone
@@Institutefan111 hahaha! Glad it helped!
I stopped using my Xbox for a few years hoping that would fix it.... especially since there's nothing to play on it.
Starting drifting as soon as I powered it up 😂
Dang. Did you try these fixes?
I opened up my friend's controller to try and fix her drift issue and found the little gray piece ( 4:31 ) missing on the left stick altogether. In that case, does she need to buy a new controller or do they make replacement little pieces like that? 😭😅
Hmm. Did you clean everything out if there? If you cleaned it and removed the grey piece then you might need a new one.
@TryThisDIYFix it was bought used from gamestop and it looked like they opened it up before so when I opened it, the piece was already missing, I didn't remove it and I assume they did or didn't notice it missing
Also thank you for the reply!
@@Perilsphere yeah that happens. Sorry about that.
Very helpful, thank you so much!
Awesome! I’m glad it helped! Feel free to subscribe for more helpful videos
But what if your control inputs RT when you pull the left stick down?
Hmmm. Could that be under settings?
Try to clean it and see what happens.
When I press my analog stick down, it feels like it’s not in place, meaning it’s kinda hard to press down??
I’d say take it apart and see if there is anything wrong with it. It could be dirty or damaged. Let me know.
What should I Do if my controller analog stick is is sticking when I press down
I would open it up and clean it. I've heard that will sometimes fix it.
Just watched this video thanks ❤.
You got it! I’m glad it helped! Feel free to subscribe for more helpful videos
You got it! I’m glad it helped! Feel free to subscribe for more helpful videos
Hey bro just a quick question, do you know any way to remove these screws without a screwdriver? I'm not really interested in buying one
Hmmm, not that I know of sorry. It’s a unique tip as well. I had to get the kit that I have in the description in order to get it open. Sorry about that.
Yeah break it off and buy a new one
@@bluebacon7057 haha.
I have a Power-A brand wired Xbox One controller for Xbox/PC. The left thumb stick isn't sticked or anything, it's just loose. It's a relatively new controller, and it's been knocked off my chair or bed (a 1 and a half to 2-foot drop at most). When I rest my thumb on the thumb stick, I can easily wiggle it around, causing slight input in some directions. When I apply pressure and move the stick along the upper right quadrant, I have increased resistance and a squeaking noise. Is this something that opening the controller can fix or is the stick broken? I am a little afraid to open it up if I don't need to, since I fear breaking some other part of the controller.
I hear ya! I was worried as well to open it up. But I’d recommend doing it and seeing what’s going on. It sounds like it might be broken a little bit or there could just be something in their hindering it from moving correctly. Open it up and see. Let me know what you find.
@@TryThisDIYFix So I popped it open, which the PowerA controller was surprisingly easy with only 8 screws to open it and then 2 screws (1 by each thumbstick) remove the control board with rumble and sticks fully attached. I plucked the left thumbstick cover off and the whole mechanism is a small cube with a short metal post. it's hard to see into the cube at all. there's still the little bit of wiggling and the squeaking noise is coming from the up/down axis. I see no way to open the cube itself, it appears to be soldered to the board. 2 of the sides look like they might be made of plastic. I feels like something might be stuck in there and preventing the stick from centering fully and causing the noise. I'll have to see if I can find a way to open the cube housing the mechanisms.
Thanks for the video and the advice! I'll have to see what else I can learn about this particular brand.
@@TheBattleRabbit860 hmmm. Yeah see what that box might hold. I think you can order new thumbsticks as well. Good luck!
@@TryThisDIYFix Thank you! If all else fails, it only cost $30 lol
@@TheBattleRabbit860 ha. Yeah I hear ya!
Never mind this is kinda good
Ha! I’m glad it helped!
The screws aren’t Phillips or flat head. What kind of screw driver you using ??
Hey Frank, it’s a T bit. I have a link for them in the description. Let me know if it works.
Sorry for that message, I appreciate your help 🙏 thanks
No problem. You got it! Feel free to subscribe for more helpful videos. Thanks
@@TryThisDIYFix okk cool thank 🙏
Idk if it's me but when I used the rubbing alcohol my controller was fixed but I can't turn it on?
Hmm, that's odd. Is it dead? Have you tried it again?
@@TryThisDIYFix Yes but now I just put some more rubbing alcohol and let it dry and now my controller turns off again(btw it's wired)
@@adopt8202 That is weird. It wasn't doing this before? I dont think putting the rubbing alcohol on it should make it short out or turn off. Maybe check the connection?
Best at solving problems
Thank you! Thanks for watching the video! Feel free to subscribe for more helpful videos.