Remove Rusty Screw / Bolt - Quick Tip
Vložit
- čas přidán 28. 06. 2024
- I show how to use an impact driver to remove a rusty stuck screw without damaging it. Broken screws, bolts and stripped nuts are one of the biggest challenges a mechanic faces, especially those who work on vintage machines. I detail how to use the right tool in the correct way to remove corroded screws and bolts without stripping or breaking them off.
Urban Monk TV Website: www.urbanmonktv.com
My Book - Creating Mr. Kortan: Building a Custom Vintage Cafe Racer: www.amazon.com/Creating-Mr-Ko...
Follow UMTV on Instagram: / urbanmonktv
Purchase Urban Monk-approved parts and tools on Amazon: www.amazon.com/shop/urbanmonktv
The Alpha Moto: thealphamoto.com/?ref=pky5lw8...
Discount code: UMTV
Crypto traders/HODLers can trade cryptocurrencies with lower fees and support UMTV at the same time on Binance by registering with this link: accounts.binance.us/en/regist...
Copyright 2020 © Urban Monk TV - All Rights Reserved - Auta a dopravní prostředky
It’s called an impact driver for those that don’t know. Another tip folks.... Spray some WD40 and allow time for it to soak BEFORE hammering and going in dry.....
Thanks for watching!
ayo hol up pause. didnt sound right
Works like a charm!!! I spent an hour trying to take off a license plate with rusty screws. I was trying to avoid stripping the screw head. Watched the video and purchased an impact driver. 10 minutes done!!!
They're a great, inexpensive tool to have around. Thanks for watching!
Did you ended up breaking the retainer ?
@@dawnsreviews7205 No I didn’t break the retainer
@@keitht47 great!!! I am going to get one...trying to remove it again tomorrow. Thanks!!
Great tool!
I'd hardly call that a rusty screw
It wasn't coming out with a regular screwdriver and I needed to title the video something. Thanks for watching.
The video is very helpful. Could you please share some details on that impact screw driver along with its price and a link where I can buy it from if possible, Thanks
Thanks for watching. There's a link in the description below to Amazon tools I own and recommend. The impact driver I use is in that tools list. You can get it there. Best regards.
great video!
Thanks for watching!
I also recently discovered this tool. Considering its like 12 bux or something, it hard to pass up.
Thanks for watching!
My screw is in the place where I can't fit a beefy front end of this screwdriver. Any tools for a such scenario? Thank you.
You may be able to find a smaller bit that fits the impact driver but tapers down to the smaller size you need. Alternatively, sometimes just tapping a regular screwdriver into the screw with a hammer is enough to release the tension between the threads, but of course there's no torsion motion included in that scenario like with the impact driver. Good luck!
already have a cordless impact driver. Was going to use it on my license plate screws but the nut in back can detach.
Thanks for watching.
I got nasty ol black rusted screws on my toilet seat and I'm having a hard time taking them off. They don't seem to be stripped but definitely tightened to all h3ll.
Those are probably best cut off with a hacksaw and replaced with nylon bolts and nuts which will not corrode.
@UrbanMonkTV like a mini hacksaw? Sorry I'm not a tool lady LOL
@@nicole_roma You could try soaking the threads with PB Blaster (seriously I didn't make that up) to see if that loosens the corrosion up but sometimes those get too far gone. Then yes, a mini hacksaw or even a grinding wheel on a dremmel could cut the bolts off. You just don't want to damage the porcelain. Kind of tricky. Good luck! The joys of home ownership!
Si, ya lo habia visto con mecanicos de la Yamaha.. Old school yamaha mechs used it a long time ago here in Costa Rica.. Greet, by the way I happened to like motorcycles... Aufwiedersehen oder Aurevoir..
Gracia por ver.
I don't think an impact driver is ever used for tightening anything. The 2nd setting is for loosening left-handed threaded screws.
That makes perfect sense. Thanks for throwing in here.
What do you do after you already stripped and rounded it off???
Well that's probably another video but I would use a cold chisel to put some angled indents in the head of the screw and see if I can get any movement. Applying heat to the surrounding metal with a propane torch can help too, if the material can take the heat. Depends on the application. Thanks for watching.
Chisel, or a die grinder to make a slot to use a straight bladed screwdriver on it. In extremis, weld a nut on to the end of the thing through the middle of the hole in the nut.
Thanks for the tip. Did you tried with a rubber coated hammer (dead blow) to avoid damage to your impact driver?
Thanks for watching! Admittedly I haven't tried either but I think the rubber mallet wouldn't drive a sharp enough force for many stuck screws/bolts and I'm afraid the impact driver would damage the impact surface of my dead blow hammer, which is plastic.
Urban Monk TV Thanks, I don’t have an impact driver but will definitely get one.
@@luketrem I've got one on my Amazon influencer page (link in video description) for $12 that is exactly like mine.
I never knew that hammers were different types of steel.
Thanks for watching! Good hammers should be.
What is your tool name
amzn.to/3BsaK1r
Thanks for watching! Link to my tool below.
Didn’t look very rustic to me
Thank you for watching.
Pretty neat, but the music is a bit distracting.
Sooo long to watch this.
I'm sorry you felt it was too long. Excerpt from my channel's "About" page..."...in-depth, detailed DIY motorcycle maintenance instruction..." I appreciate you watching. All the best.