How to Remove Damaged and Rusted Screws FAST

Sdílet
Vložit
  • čas přidán 24. 04. 2019
  • Sign up for my free masterclass and learn the insider DIY tips and tricks for home renovation. Transform your home with confidence www.seejanedrillcourse.com/re...
    *Register ASAP! Spots limited
    Leah demonstrates how to easily and quickly remove damaged, rusted and seized screws using a couple of different methods.
    If you like our vids, treat Leah to a cup of coffee!
    www.Ko-fi.com/seejanedrill
    Click on this link to shop on Amazon via See Jane Drill: www.amazon.com/?tag=sejadr-20
    Note: If you purchase any items through See Jane Drill's Amazon links, we will receive a small commission.
    If you really like the work we that we do or have been helped by our videos, consider supporting See Jane Drill on Patreon: / seejanedrill
    Contact Info:
    Website: www.seejanedrill.com
    Facebook: / seejanedrill
    Twitter: / seejanedrill
    Email: leah@seejanedrill.com
    Disclaimer:
    Due to factors beyond the control of See Jane Drill, we cannot guarantee against improper use or unauthorized modifications of this information. See Jane Drill assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. See Jane Drill recommends safe practices when working with tools seen or implied in this video. Due to factors beyond the control of See Jane Drill, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not See Jane Drill.
    #seejanedrill
  • Jak na to + styl

Komentáře • 393

  • @seejanedrill
    @seejanedrill  Před měsícem +2

    For those of you who want more, sign up for my free masterclass and learn the insider DIY tips and tricks for home renovation. Transform your home with confidence www.seejanedrillcourse.com/register-home-masterclass

  • @walterpalmer2749
    @walterpalmer2749 Před 5 lety +82

    What’s best about your videos is your unhurried explanations. Well done.
    Old screws are really tough to get out. Don’t expect them to be easy.
    Household jobs, done correctly, usually take much longer than you think.
    It’s all about self-reliance, self-esteem, and perseverance.

  • @tuscaderofour
    @tuscaderofour Před 5 lety +7

    Leah has the kind of voice that is so soothing. She can conduct lectures and seminars or any alike and the audience will listen attentive and never get bored. Thank you Leah, I have learned a lot from you...

  • @capone079
    @capone079 Před 4 lety +111

    Someone give this lady a TV show; she's a natural.

    • @juliaocarroll5424
      @juliaocarroll5424 Před 2 lety +2

      YES PLEASE!!!

    • @cra2cra226
      @cra2cra226 Před 2 lety +2

      I've thought the same thing since the first video of hers I saw. In YEARS of watching youtube videos, she is in the top 3 of creators that are charming, patient, concise, clear, and don't "um" and "ah" through their videos, repeating themselves.

    • @lilyh1039
      @lilyh1039 Před 23 dny

      I watched many YT demos and she showed real deal Others on YT showed demos and noticed their screws are new, not rusted so of course it will work. I tried it with my rusted screw 4 different technique nothing works. I will try her idea.

  • @lourdesbaby964
    @lourdesbaby964 Před 4 lety +13

    Exactly One year to the day and I have finally found a fellow lady DIYer who helped me remove a stubborn rusty screw 🙏🏼 Thank you

  • @tombob671
    @tombob671 Před 5 lety +30

    I spent 6 hours at the DMV, 😠 , come home and my good friend Leah has a new video, the day just became great, thanks Grandpa Tom

    • @CrankyPantss
      @CrankyPantss Před 5 lety +6

      Tom Burgess I know what you mean, Grandpa Tom. A video from Leah feels like a good friend has just stopped by for a cup of coffee, doesn't it? Have a great weekend.

    • @BillSW
      @BillSW Před 5 lety +8

      Yup her relaxing voice teaching us something cool and new is a great escape from stress

  • @blueandbanana
    @blueandbanana Před 3 lety +5

    Thx for the Impact Driver video. It worked! Spent weeks trying to remove screws attached to stainless steel. I tried EZ Outs/Speed Outs, screw extractors, rubber bands, super glue, drill bits, gloves, and the only thing that worked was using a rotary tool with cutter (Harbor Freight $10) to cut a line/slit(Phillips flathead) in the center of the screw so an Impact Driver can hold onto the screw. My screw was too short and the material was very soft. Put painters tape on the screw before using an Impact Driver(Amazon $12). This was the only thing that worked for me. Hope this helps someone out there.

  • @MsJoanK
    @MsJoanK Před 2 lety +9

    This was great! I'm replacing rusted door hinges and needed this advice for a rusted, stripped screw. The titanium drill bit did the magic. You have just the right amount of instruction without any backstories... very precise and helpful!

  • @edgarperez5587
    @edgarperez5587 Před 5 lety +42

    Sometimes im like, this video its not really for me right now, 4 minutes into the video i am like wow this woman is brilliant, thanks, Leah.

  • @puneetgupta3663
    @puneetgupta3663 Před 9 dny

    What a genius! I like how she shows all the methods that won't work and then goes to the correct method.

  • @allenhess6583
    @allenhess6583 Před 2 lety +3

    Thanks Leah, I bought a bandsaw on Craigslist and the owner didn’t tell me he had stripped some hex screws on the saw. I’ve watched several other videos, but had not seen your method of drilling off the screw head. I’m going to try some other less invasive methods first but may resort to your method. Thanks again for helping to change my sometimes tunnel vision on how to fix something. Greetings from Maine

  • @TRONMAGNUM2099
    @TRONMAGNUM2099 Před 5 lety +13

    I really enjoy your videos. I have been a service tech for over 20 years and I still learn new stuff from your videos all the time.

  • @DianatheAxolotl
    @DianatheAxolotl Před 3 lety +1

    I just want to say thank you!!! I’ve asked a million people at Lowe’s and Home Depot, how to remove some corroded rusted hinges from a fish tank stand! Not one person told me this!! I appreciate the video very much!

  • @vllrrql
    @vllrrql Před 5 lety +2

    I am a retired school teacher and have gotten back into DIY projects as a result of washing your videos. I am relearning lost skills from long ago and loving it thanks to your style and manner of teaching craftsman tips! Keep videos coming and looking forward to learning from you! Never to old to learn handyman skills at my age of 66 years!!! Thanks !!!

  • @lespaul59burst
    @lespaul59burst Před 2 lety +2

    I thought I had tried everything to remove 16 year old stripped head and rusted screws, and I was extremely frustrated. Then I came across this video, and tried what was suggested. It worked! This lady is the best!

  • @Shybairnsgetnowt1
    @Shybairnsgetnowt1 Před 5 lety +1

    I watch your videos despite doing very little DIY these days, simply because they’re so interesting and you’re so friendly! I do forward some onto my son who’s a painter and decorator, and this will be one of them.

  • @dawnwaack9468
    @dawnwaack9468 Před 3 lety +1

    I literally just came across severely rusted screws off of a cellar door and hinges are done in too. Love the hints!!! Saves me soo much time having concise tips.

  • @JasonRasmussen
    @JasonRasmussen Před 5 lety +25

    Fantastic information. Always learn something new from you. Thank you.

  • @-themercyseat
    @-themercyseat Před 5 lety +14

    As always you make things look so easy, thank you for all the free knowledge you give us in your videos! Mad respect to you!!

  • @LouisGedo
    @LouisGedo Před 5 lety +19

    Excellent technique. Quite a number of do-it-yourselfers that I know don't realize that when drilling metal it's always better to drill slow rather than fast.

    • @transgreaser
      @transgreaser Před 9 měsíci +1

      I didn’t! 🎉

    • @LouisGedo
      @LouisGedo Před 9 měsíci +2

      @transgreaser
      Yes........ the harder the substrate the slower the drilling in general

    • @transgreaser
      @transgreaser Před 9 měsíci

      @@LouisGedo thank you so much. Good to know! 🤙

  • @anagalarza240
    @anagalarza240 Před 2 lety

    Leah, I want to Thank you so much for helping me with a little project at home. I appreciate your videos as well as how thoroughly you explain your projects at hand and the many tool options to work said projects. Your video helped me remove some rusted screws for the door hinge of my bathroom cabinet. I appreciate you Leah!

  • @PhinAI
    @PhinAI Před 5 lety +1

    Ms. Leah, I want to take a second to say how much I appreciate your heart and information in these videos. You are insightful, kind, and encouraging!
    As a little return I'd like to share a tip on this topic that saved me tremendously. Instead of using a larger bit, use a bit slightly smaller than the diameter of the screw shaft and drill a little ways right through the center. Tap a torx bit into that recess, and screw the screw out. It's very simple, clean, and puts some of those torx bits to use.
    Thank you, so much, for sharing your experience and knowledge!

  • @Shananana99
    @Shananana99 Před 3 lety +1

    Leah you teach so well! Every time I watch one of your vids, it’s always so clear and easy to understand. Thank you!!

  • @TravisMCP
    @TravisMCP Před 5 lety +1

    Another awesome one Leah! I've had stripped screws before and it's always a pain. Thanks for the tips!

  • @Jamie-Smith
    @Jamie-Smith Před rokem +1

    Thank you very much. Your clearly-explained video has just helped me change direction to successfully-remove the rusty screws from an old toilet seat. Saving me money and the seat from going into landfill. Great work.

  • @1mongorock
    @1mongorock Před 5 lety

    Leah, you are by far the best instructor on you tube. I always enjoy your videos. Even after 30 plus years as a master mechanic, I constantly learn things from you. Please keep the videos coming.

  • @anthonyd.5140
    @anthonyd.5140 Před 5 lety +1

    Leah no surprise another outstanding instructional video! Thank you so much again for sharing your knowledge and experience in a way only you can! I feel like a kid at Christmas each time I watch one of your videos.

  • @beverlymichael5830
    @beverlymichael5830 Před 5 lety +2

    OMG I need that. I have struggled with damaged screws and many times gave up. Thank you. Thank you. Thank you 👍👍👍

  • @urmomsmom
    @urmomsmom Před 3 lety

    Honestly, exactly what I needed AGAIN! By far one of the best channels out there! Always super useful! Thank you!!

  • @shadowandbosco
    @shadowandbosco Před 5 lety +4

    Always very helpful tips - glad I found this channel

  • @philipketchum3681
    @philipketchum3681 Před 5 lety +2

    Great video as always, thank you. One thing I would like to add is using a left-handed drill bit is also a great way to remove stubborn screws.

  • @ronfaria5146
    @ronfaria5146 Před 5 lety +1

    Love your advise. I have run into the same problem I did it similar like you did but you gave me a little better advise on the drill bit.

  • @denirn8725
    @denirn8725 Před 4 lety +1

    A lot of work! A DREMEL CUT-OFF wheel never fails me removing “buggered-up” screw heads. Just put cut-off wheel on screw head, cut to make deeper ridges & unscrew at your pleasure. This way you’re getting the entire screw out, without damaging whatever the screw holds in place. But this is better, if the screw head breaks off. Like your channel a lot! As a woman who loves tinkering, carpentry & buying every new tool out in the market, this is my kind of CZcams channel! 🙏

    • @leeb.7188
      @leeb.7188 Před 2 lety

      Will this work with a flat-head screw? I’ve got one on an ancient outdoor faucet that is stripped and frozen in place. I’ve soaked it in PB Blaster, heated it with a welding torch, whacked it with a hammer, and nothing has worked! I even bought the Engineer pliers. The metal is soft (brass?) and the slot was very shallow to begin with, and now completely mangled. Any thoughts would be appreciated because YT videos only show the removal of stripped Philips head, not slot screws.

  • @donmarijuann
    @donmarijuann Před 3 lety

    Love love love! I was probably about 15 minutes into replacing some deck boards at my parents house and found rotted boards and rusty screws. Some screws were so bad the rusted/rotted in half and I didn't even know that was a thing. Anyways I used this method for one stubborn screw and it was a breeze. I actually used a piece of an old cloth that was laying around instead of rubber but it worked like a charm. Thank you so much!

  • @georgecarra
    @georgecarra Před 5 lety +1

    Your camera angles are world class !

  • @esterixis
    @esterixis Před 5 lety +3

    Leah, your videos are the best!

  • @EvoXoXo
    @EvoXoXo Před 5 lety

    Thanks Leah, you posted this video at the perfect time for me! Love your channel!

  • @robertbamford8266
    @robertbamford8266 Před 5 lety

    Great tips. As usual. Especially as you calmly run through the techniques and discard them for a reason. But then there’s the moment with the vice grips where the screw shears off well below the surface. (Wound up drilling around the shaft until I could grab the screw again. Then drilled out the hole and plugged with a dowel and wooden toothpick shims. Fortunately hidden by the fixture.)

  • @CrankyPantss
    @CrankyPantss Před 5 lety

    It's always very nice to see a video from you, Leah. You make our lives easier with every video that you share with us. You are a treasure. I hope you have a great weekend.

    • @seejanedrill
      @seejanedrill  Před 5 lety +1

      You always say the most encouraging things. Thank you!

  • @carladee2736
    @carladee2736 Před 2 lety

    your explanations are always great...no nonsense, detailed yet to the point.

  • @margiechastain1109
    @margiechastain1109 Před rokem

    Thank you so much. This was very informative. I love how you explained several different ways to get those old rusty screws out. Thanks again.

  • @mtadams2009
    @mtadams2009 Před 3 lety

    Someone on a video ask what it take to have a successful CZcams channel. I think its good content but more importantly is that you have to have that " something special" I am not sure what that is but Leah has that special gift and human quality. It can't be taught. Thanks again.

  • @silverdemon74
    @silverdemon74 Před 10 měsíci

    This is exactly what i needed! Im attempting to remake an old vanity/cabnet that has been lying around for years, its not in the best condition, but ofc i get all of the old handles/hinges out almost no problem, except for the last screw, there flat heads and its basically become a nail bc of all the dirt and damage to it, but now i can finally start restoring this cabnet!

  • @jorrba3934
    @jorrba3934 Před 5 lety +1

    Hey Leah! I haven't had this problem yet, but good advice.
    Thank You.

  • @safepethaven
    @safepethaven Před 5 lety +8

    Good job! I love vintage things but they can certainly be stubborn in their senior years [ask me how I know, and why I removed all the mirrors around mt house LOL]. Also, I'm so fussy about these things, I'd have put some painter's tape around the knob at the point of using the vice grips, just to peotect the old knob from scrapes/dings etc from the grips being so close.

  • @mwatercress
    @mwatercress Před 5 lety +1

    Good tips! I've also had success using left-handed drill bits. Sometimes the screw starts to back out before you get anywhere near drilling the whole head out.

  • @johnmccann4041
    @johnmccann4041 Před 5 lety

    Top tips as always, Leah.
    Would also mention screw remover bits (drill a small hole first) but the trick is remembering to bring them on the job.
    (That said, with a really corroded screw the head often just shears clean off and then you're back to the mole grips to get the barrel out.)

  • @fayvaughan1882
    @fayvaughan1882 Před 2 lety

    Wow, just stumbled upon this... you're a great explainer for those that aren't v technical. Thank you

  • @kyleharshbarger2465
    @kyleharshbarger2465 Před 5 lety

    Thank you, Leah. Those old Schlage knobs polish up real nice, too.

  • @tuesboomer1623
    @tuesboomer1623 Před 5 lety +1

    Excellent video. Multiple tips for multiple situations all in one!

  • @SandiRose2008
    @SandiRose2008 Před 5 lety +102

    I don't know, Leah. I prefer to holler, kick, and scream. It makes me feel better!

    • @seejanedrill
      @seejanedrill  Před 5 lety +12

      Sandirose.....stop being sooooo funny!😊

  • @Peter-.H
    @Peter-.H Před 5 lety +1

    Great advice and tips.
    Thank you Leah👍

  • @TheWallmartPimp
    @TheWallmartPimp Před 5 lety +2

    I love how you show more than one technique, you earned yourself another sub, great video! Now if you excuse me, I have to get me one of those impact screw drivers :)

  • @ecaff9515
    @ecaff9515 Před 5 lety +1

    Excellent video and process. Wishing you great success.

  • @dawnbaker9274
    @dawnbaker9274 Před 5 lety +4

    So many ways...your explanations were clear and easy to understand. Thanks. 👍💖

    • @edgarperez5587
      @edgarperez5587 Před 5 lety +2

      Dawn Baker the only problem is when you see a video and think, cool she did it in 20 minutes, so it should take me 40 minutes, 2 hours later just crying why!? Why!.

  • @danielbyrne1899
    @danielbyrne1899 Před 2 lety

    Thank you very much Leaha. The rubber trick worked great for me.

  • @Motorman-dl1sc
    @Motorman-dl1sc Před 5 lety +2

    Great work I like that rubber putting on the screw to take up the space I will try that if I have this issue with a stripped screw

  • @KM-dz1rc
    @KM-dz1rc Před 2 lety

    Brilliant advice, clear instructions and excellent delivery

  • @tylermagness7074
    @tylermagness7074 Před 4 lety

    Leah you are great! Your videos are always educational, with no frills, and it's obvious that you're primary goal is to help others. "You can do this!" You keep making videos and I'll keep learning.
    The other comments are right... you deserve your own damn TV show... I'd buy cable just to watch!!!

  • @rubydue
    @rubydue Před 5 lety +10

    Awesome advice again. I tried the rubber band method and it didn't work for the reasons you stated. My bad screw is still where it was but not for long now. New gadget to add to my collection of tools, the Dead Blow Hammer, love it !

    • @ebbios
      @ebbios Před 5 lety +3

      you can never have enough tool. Im a tool hoarder and its getting out of hand. lol

    • @rubydue
      @rubydue Před 5 lety +5

      @@ebbios It's not hoarding if you use them :)

  • @Bart-Did-it
    @Bart-Did-it Před 5 lety +2

    Wow that red door soooo worth saving indeed and that handle has history to . nice 👍
    Thanks for the tips and I want one of the impact screw twister thingy

  • @fredbach6039
    @fredbach6039 Před 4 lety

    I appreciate your slow, deliberate and very clear manner of speaking. I expect a lot of women are benefiting from your videos. (I also like that impact screw driver.)

    • @benjamincuevas199
      @benjamincuevas199 Před 4 lety

      Fred Bach a lot of women and men benefit from her vast knowledge.

  • @michelleford9951
    @michelleford9951 Před 4 lety

    Thank you so much when i come across a problem now i go to your site and it's a blessing

  • @sharifkhan3589
    @sharifkhan3589 Před 3 lety

    I always like the way u explain the thing simple and easy which helps me to work around my old house without asking handyman for little jobs

  • @LRH143
    @LRH143 Před 3 lety

    You're my hero! Time to give your tips a try for the rusty screws on my old deck.

  • @spacegirl9909
    @spacegirl9909 Před 5 lety

    Always a pleasure to watch your videos!

  • @aaronkoh7749
    @aaronkoh7749 Před 5 lety

    Damn Leah, you are always able to share knowledge no one else could.

  • @internetconnoisseur5661
    @internetconnoisseur5661 Před 5 lety +4

    Seejanedrill, a drill extravaganza exclusive

  • @magicrobharv
    @magicrobharv Před 5 lety

    Great video Leah, I need to do this to my deck. I have replace some boards and the screws are stripped. Great info!

  • @007lock
    @007lock Před 5 lety +1

    Great video! You really covered some great methods for screw removal. As a note - you can also have success using a good strong Phillips head screwdriver and tapping with a hammer and twisting. I’ve also had screws where the head just breaks off altogether! Looks like you could use a good cordless drill - I rarely ever use a corded drill anymore. Checkout ridgid tools and ridgid jobmax if you don’t already have a cordless you won’t regret it. Keep up the great videos!

  • @LifeGeneralist
    @LifeGeneralist Před 2 lety +1

    Helpful.
    Happy to see a lady do this task.

  • @LisaLubin
    @LisaLubin Před 3 lety

    You rock Leah! Perfect demo. Thank you.

  • @richwood2741
    @richwood2741 Před 5 lety +1

    Loved that you showed the impact driver. I use it a lot. Just wondering why you did not mention a screw extractor set. That would also work and is not very expensive.

  • @foreign_affairs
    @foreign_affairs Před rokem

    This is the video that did the trick. Thank you so much!

  • @Annie-49
    @Annie-49 Před 4 lety

    I just started to repair and paint my front door, and ran into this very problem of rusted, stripped screws. What a great video! The instructions are very clear, all the tools were named and now I think I can do it! Thanks! x

  • @brotherjohnathon1239
    @brotherjohnathon1239 Před 5 lety

    Your a awesome teacher. Thank you for sharing your knowledge.

  • @christelstrifler9562
    @christelstrifler9562 Před 5 lety

    I never would have tried this but now that I have see you do I think I would try it now, Thanks

  • @reynaldovalle1773
    @reynaldovalle1773 Před 5 lety +26

    That is an old knob and a old handle the knob is called a schlage wafer lock pretty old once you buff them up they come out nice. but that I would recommend that lock to be changed they're very easy to open. God bless you family and friends I enjoy seeing your videos..

    • @seejanedrill
      @seejanedrill  Před 5 lety +6

      You must be a locksmith because you're absolutely correct about the make

    • @reynaldovalle1773
      @reynaldovalle1773 Před 5 lety +2

      @@seejanedrill
      yes I am retired that's why I say Enjoy your videos I still do locksmithing on the side for me at the house family members and all that and then the church I used to have my own business in New Jersey now I live in Puerto Rico but I'm planning to move back to the States.. that was very good you figured out I was a locksmith I didn't think you would have noticed that very good observation God bless you family and friends. by the way the reason I said you should change it is because you can open that with a paperclip I didn't want to say it but I will tell you you can open that with a paperclip..😀

    • @reynaldovalle1773
      @reynaldovalle1773 Před 5 lety +4

      @@seejanedrill
      By the way if you ever need help or any ideas maybe with a lock or anything I'll be more than happy to explain it to you

    • @Ghost_Os
      @Ghost_Os Před 5 lety +2

      Beat me to it, lol. I was about to remark how rarely you see those anymore. Used to be pretty common on hotels in my area. Leah, if you do decide to replace the knobset, I would buy the old Schlage wafer from you if it works.

    • @reynaldovalle1773
      @reynaldovalle1773 Před 5 lety

      @@Ghost_Os how you doing good morning God bless you family and friends do you collect them just out of curiosity let me know.

  • @dmack1443
    @dmack1443 Před 5 lety

    Nice video...thanks for uploading..always watch them for those handy tips.

  • @SilverMosico
    @SilverMosico Před 5 lety +3

    Leah! Don't forget about the Speed Out screw extractor! The extractor has saved my bacon with a couple of stripped and stuck screws.

    • @Al_Z.Heimer
      @Al_Z.Heimer Před 5 lety +3

      I bought a set of the extractors after doing almost the same thing she did in video but without the lubricant. I wish she would comment here on those extractors....but certain drilling is the final method to try. I like her calm and thorough way she explains the methods she chooses.

    • @seejanedrill
      @seejanedrill  Před 5 lety +6

      I did a video a couple of years ago demonstrating the speed-out screw extactor. This video is another option.

    • @goodun6081
      @goodun6081 Před 5 lety +1

      @@seejanedrill , screw extractor techniques work even better if the drill is a left hand cutter. Sometimes the rotational force and vibration of the left hand drill bit will loosen the previously frozen screw as you start drilling the head out.

  • @ElectricPulse100
    @ElectricPulse100 Před 5 lety

    Leah, thanks for your videos. You’re awesome.

  • @bridgetparent6534
    @bridgetparent6534 Před rokem

    Thank you for teaching me all three ways! You’re the best! Sunscribed❤️

  • @dianeperkins8507
    @dianeperkins8507 Před 4 lety

    Thanks Leah, this is the second time I have amazed my carpenter husband by solving a problem using your video :-)

  • @TheSchmidtsu
    @TheSchmidtsu Před 5 lety +1

    For some reason I have a fascination with restoration videos. Would love to see your restoration process.

    • @kathyb3619
      @kathyb3619 Před 5 lety

      TheSchmidtsu. Me, too. I’d love to see what she does with the hardware and how it looks afterwards.

    • @seejanedrill
      @seejanedrill  Před 5 lety

      I'll be sharing the results

  • @Jandavis57
    @Jandavis57 Před 5 lety

    Well done! Can’t wait to see the restored door & lock!

  • @johnnicatra570
    @johnnicatra570 Před 5 lety

    Great to see you back.Was worried about ya.Love all your videos.

  • @Steve-tc2pi
    @Steve-tc2pi Před 8 měsíci

    You are good at explaining. THANKS

  • @RERK8
    @RERK8 Před 4 lety

    Thank you for this video. I'm doing a semi gut and have safely removed and dismantled all appliances and fixtures except a large stubborn mounted kitchen cabinet. The flathead screws holding it is slightly rusted and damaged. They are deeply imbedded in the walls. I will try again with a rubber band. If it doesn't work, I'll use the specialty tools you've listed to drill or cut into the screws to screw them out.

  • @AnotherClown01
    @AnotherClown01 Před 5 lety

    Another great tip! Thank you Leah...

  • @anthonymichael123
    @anthonymichael123 Před 3 lety

    Fantastic, Leah!

  • @ahmedhusseinny
    @ahmedhusseinny Před 5 lety +1

    Who the hell thumbs-down's this video? Dumb idiots! Leah, must tell you, you are such a breath of fresh air to watch/listen and enjoy and learn. Keep up your great work. I love you!

  • @redneckering
    @redneckering Před 4 lety +1

    great tip. sometimes I use lefthanded drill bits in the same size. they will sometimes remove the old screw as it drills out the head.

  • @Proceed999
    @Proceed999 Před 5 lety

    Great Video, love your positive attitude!

  • @johnryan8040
    @johnryan8040 Před 4 lety

    This was so helpful thank you for making this video

  • @sonichog
    @sonichog Před 4 lety

    You're a Saint Leah! Having this issue right now

  • @CC-xb3ll
    @CC-xb3ll Před 3 lety

    Thank you so much for making this video!

  • @kenbrownfield6584
    @kenbrownfield6584 Před 4 lety

    Good helpful vid Leah

  • @Lucypetuniaggm
    @Lucypetuniaggm Před 3 lety

    My friends are always calling me (a woman) to come help them with one thing or another. Some of the tasks are so simple I’m embarrassed for the person asking. Someone recently asked me how to open a paint can. I had to struggle not to laugh. But, I sure as Hell don’t know everything...not by a long shot. That’s why I’m glad I just found your channel. Never occurred to me to drill into the top of a seized screw. That, and all sorts of other things you demonstrate, add to my knowledge & help keep this 68 year independent. Thank you!!

  • @JohnJacksonJohnson
    @JohnJacksonJohnson Před 5 lety

    I bought a wooden display flagpole the other day with a flag attached. I want to restore it, but there's a piece of clear PVC tubing on the pole that I don't want on there, but there's also a screw preventing the tubing from sliding up and down too far. The endcap is both really nice and is held on with a strong glue, but the other end of the tubing is held in place with a screw that's a Phillips that I think I almost stripped.
    I'll try this method from now on for stripped screws!
    Thanks, Leah!😁😁😁

  • @lorettaranieri7442
    @lorettaranieri7442 Před 9 měsíci

    Excellent video. Thank you