GENIUS! This is hands down the best tutorial on crown molding. I just could not figure this out for the life of me. Thank you so much for sharing you and your Dad's brilliants!
The best explanation I have seen on cutting crown molding. I'm installing crown molding in our bathroom today and after watching your video last week...and again this morning, I feel more confident. Thank you !!!
This video really helped me do a crown molding job for a customer. I've always had trouble doing crown. All the videos I saw on CZcams didn't help. However your video is simple to understand. I watched it several times and the next day I was
Folks! This is what I gathered.. Copy the text and put it on your phone or print it. This man has ended my headaches and heartaches: WOOD UPSIDE DOWN on the Right of Saw + Saw angled to the Right = Inside Cut Corner WOOD UPSIDE DOWN on the Right of Saw + Saw angled to the Left = Outside Cut Corner WOOD UPSIDE DOWN on the Left of Saw + Saw angled to the Right = Inside Cut Corner WOOD UPSIDE DOWN on the Left of Saw + Saw angled to the Left = Outside Cut Corner That pretty much sums up what I haven’t been able to figure out watching more videos then I care to admit. Appreciate you using the Kiss Method. If I made an error - please correct me and I will edit it. Thx. Chris in Kalamazoo
shouldn't it be this wood right + blade right = inside corner wood right + blade left = outside corner wood left + blade left = inside corner wood left + blade right = outside corner
This is perfect. After watching few videos on CZcams I was able cut the crown. However, remembering which side to cut when was confusing. This perfect. U can write it down and just go for it. For DIY this is great.
Years back I put up this same crown. Made pattern pieces because videos were not too thorough. I literally forgot to do master bedroom ...oops! So now I'm trying to figure out cutting AANNDD I realized I put the crown up on the other rooms walls upside down...HAHA!! Looks good tho. So I will install MB crown the same way the rest of the house is...Upside down! Thanks! GREAT EASY VIDEO!!
Hey Cindy, I know this reply to your comment is late and I'm sorry. I am trying to keep up but it's pretty difficult. Your not the first one that hung crown upside down. Obviously nobody figured it out but you, after watching the video..Glad the video helped you out. Have a great New Year!
Omg!!! Your a genius!! I just cut my crown molding, I can’t believe it, my husband can’t believe, he said it was too hard to difficult, I just freaking did it!!!! Yasssss!!!! You just saved me $700. Thank you!!!🥰🥰🥰🥰😍😍😍
Well, I really am sorry this response to your comment is so late...Responding to all the comments is so time consuming and I actually have a real job. I am very happy for you and for allowing you to attempt something you thought you could not do. I hope you shared your experience with others and possibly this video!!! Also, glad to have saved you all that money. Are there any other home improvement videos that you would like to see? I'd be happy to make one and give you a shout out! Have a Happy New Year!
Probably watched like 10 other videos by now but they all just rushed thru it and even forgot to mention a few things like flipping the crown mold before cutting... Happy i stumbled across your video cause its a gem! Should be on top when searching for how to cut crown molding! Thank you for the video and going into details with everything, really helped me out ! :)
This was the best crown tutorial I've found. I've watched approximately 1254 of them. The goal for me now is to figure out exactly WHAT angle my inside (lazy susan) cabinet is at. Thank you!!
THANK YOU for this video! I'm fairly handy, but crown molding has been my nemesis for years until this video. GREAT VIDEO! Kitchen cabinet crown installed!
This video made it so easy! We watched several others and were about to quit until I found this one. Thanks and great job our project turned out great 😉👍
Everyone else on CZcams just telling you " you have to cut the top side down and cut at an angle" without mentioning that the saw placement on left or right will dictate if an inside or outside cut and just assuming you know that. This is the only one I saw that actually walked through the saw positions needed for each type of corner needed
Hey Robert, glad it helped your project. Subscribe and share, I have more videos coming out soon. Any topics that you would like to see explained? Happy New Year!
Great video. I have watched this several times. One add on to my miter I learned by watching was to add a taller skirt and this enabled me to get a better seat on the crown molding (top and bottom). I simply through bolted a 3/8" finished scrap piece of plywood to the fence on the left and right side of the blade (counter sunk the machine screws). Just make sure when you lower the blade that the housing clears the taller fence when cutting at a 45 degree angle.
Thanks for the information! I watched a few other videos but I came back to yours and kept referring to it. The tape trick is awesome and also writing the notes about which side you are cutting on and the angle of the saw to give the correct cut. Those were key points that helped me a lot. Thanks again!
Hey Michael, sorry for responding so late to your comment. Thank you for letting me know that it helped, make me feel like it was a good use of time for a video that helped many. I hope you have a great New Year and take care.
Thank you! I have done crown so infrequently that I have to brush up on it and this basic concept will now be my go to for painted crown. (The coping method is what I have used in the past.) Appreciate your vid!
One challenge not addressed in videos like this are when cutting crown, you're not cutting a 12" piece but rather a 12' piece. Keeping it on the fence perfectly with a piece that long can be difficult and cause the cut to be inaccurate. I prefer and compound-miter cut where the crown can lay flat to cut. All that aside great video, thumbs up from me.
Tracey, sorry for the late response. You must be so proud of yourself. I know several people that are in the trades and will not attempt crown moulding. Thanks for sharing. Good for you! Subscribe and share, Happy New Year!
Thank you sir. This was the best instructional video I could find. I’ll be watching more. I had already wasted one 16 ft piece but I know how to put half of it back together. I really appreciate the time you spent on this and your sympathy for us poor DIY SLOBS. 😂
MOLDING UPSIDE DOWN Blade to your right & wood to your right = Inside corner to the right MOLDING UPSIDE DOWN Blade to your left & wood to your right = Inside corner to the left MOLDING UPSIDE DOWN Wood to your left & Blade to your right = Outside corner to the left MOLDING UPSIDE DOWN Wood to left & Blade to the right = Outside corner to the left MOLDING UPSIDE DOWN Wood to right & Blade to the left= Outside corner to the right Inside Corners - longest measurement is always the bottom Outside corners - longest is always the top YOU'RE WELCOME! 😁
Thank you for putting this into words. Kind of a type of decision tree…you know if you need an outside or inside and on which side right or left. That is the easy part. But then once I flipped it over and had it on the saw I would instantly go stupid!! Don’t know how many times I put the crown to the side waiting for a time when my brain was fresher but thinking about it constantly and then second guessing myself and in the end making mistakes anyway and wasting material. Cutting crown is a humbling experience indeed!Thank you again!!
2:53 You should have spent a bit more time explaining your markings on the miter table. I had to watch it a few times to take notes on the proper blade & molding placement, but once I had it, PRESTO! This simple idea made all the difference for me! That is the BEST part of this whole video. Turned crown molding into a no-brainer!
Gary, I will make another video and zoom in on the markings. There are two more ways I install crown that I want to demonstrate. Cutting the crown flat on the miter table and cutting the inside and outside angles and coping the cut to fit. Thanks for the comment and take care!
Better than this old house instruction. Love to see you do the measurement and mark the piece and put it up. Do you measure your walls first, cut the pieces, then put it up or do you measure, cut the piece and then measure for the next wall?
Hey Shacobyl, I'm glad I was able to help. Subscribe and share, I'll be posting new videos soon and a surprise tool I patented for enlarging existing holes and offset holes. Take care
Can you do a video for coping. Basically a 90 degree that I'm installing on craftsman style header over a door way! And demonstrate where to measure please!
Glad you enjoyed it. I’ll be adding some new videos soon covering more crown techniques to make it simple. Please Subscribe and share. I also designed and patented a tool to widen and offset an existing hole, stay tuned for the demonstration video. Take Care!
I was trying to dope that out myself. I think a speed square or a protractor is part of the answer. In my case, i was about to just ignore our slight vault and just run straight across, as I'm just running some crown below some existing molding. I'd take the existing down and use that as a guide, but the previous owner was even more geometrically challenged than I am. If I needed to conform to the existing line, I'd probably just use trial and error with crap molding, then transfer the angle to the good stuff. I know there is another way to do this, using the 31 degree markings and laying the molding flat and tilting the blade. Presumably, you'd add the angles, but I'm not sure, and I'm out of extra pieces to experiment with. This way works, but its only as precise as your ability to hold the work steady when you make your cut. I'd hate to try addibg an angle while relying on my grip to hold the work to the fence. As it is, I'm avoiding any situations where I would need both ends mitered other than a 90, as I would be making a big expensive scrap pile.
Hi Mike, good video. I was just wondering how you put the permanent marker on the blue tape. Did you have to measure the angle between the fence and the tape to be 45 degrees?
Great instructional video. How much extra length would you add to your crown piece for an outside miter that is going to meet an adjacent outside miter?
Klaymour, sorry for the late response...I'm so behind on comments, but I try and respond to all of them. Thank you for the awesome comment, glad the video helped if you needed it. Please subscribe and share, new videos coming soon. Have a Happy New Year!
One important detail that is seen in the video but not mentioned: The fence where the molding tilts and sit on has to be tall enough to support the molding sitting at 45 degree angle. And the fence should not stop the blade to cut all the way thru (my miter saw is fix and can't get thru !!!, might have to get another one). In this video, the tall fence is made in wood and somehow get attached flat to the metal fence.
This is great, but all I have is a mitre box and handsaw and am trying to trim a column, which I assume is four outer corners. I tried using foam crown and it was a mess. 😑
When and where does the miter angle use for? You only used the bevel angle. I'm confused. Do I really need a compound miter saw to cut crown moulding or not? I believe that based moulding is easier to cut using bevel angle.
Crown can be cut as I show it in the video, it can also be cut laying flat on the table of the saw. If it’s flat, you would use the bevel of the saw for both inside and out cuts. Not needed if you place the crown on the saw as shown in my video. Hope that helps!
Good mate! But how do you measure it? Lets say you need this piece to be 255mm e the other one 243mm. I really do not understand =/ I stuff up some pieces until I guessed the right position. Thank you
GENIUS! This is hands down the best tutorial on crown molding. I just could not figure this out for the life of me. Thank you so much for sharing you and your Dad's brilliants!
Glad it was helpful! Hope you shared this video with your confused friends as well....Take care
Oxvcsc Ty
By
😊😊 7:26 😂
In 7 minutes explained a outside and inside corner better than 30 minute videos I’ve watched. 🫠
I watched a bunch of other people talk in circles about how to cut molding but this is the most direct and simple. THANKS!
Smithmt13, thanks for the comment. Glad to help.
Awesome video. Clear and easy to understand.
Hands down the best teaching video. I’ve wasted so many . Thanks !
The best crown molding instruction video on CZcams. Thank you so much!!!
The best and simplest video on crown molding. I don't think it would be that hard if I could find a video that properly explains it. Thank you!
Helped me so much! Quick and simple explanation!
Best crown moulding video on youtube. Very explanatory.
The best explanation I have seen on cutting crown molding. I'm installing crown molding in our bathroom today and after watching your video last week...and again this morning, I feel more confident. Thank you !!!
Glad it was helpful! AND, sorry for the late response. I'm trying to keep up with the comments.
This video really helped me do a crown molding job for a customer. I've always had trouble doing crown. All the videos I saw on CZcams didn't help. However your video is simple to understand. I watched it several times and the next day I was
Thank you, save me about 900 bucks and most of it all made my dad proud.
Folks! This is what I gathered.. Copy the text and put it on your phone or print it. This man has ended my headaches and heartaches:
WOOD UPSIDE DOWN on the Right of Saw + Saw angled to the Right = Inside Cut Corner
WOOD UPSIDE DOWN on the Right of Saw + Saw angled to the Left = Outside Cut Corner
WOOD UPSIDE DOWN on the Left of Saw + Saw angled to the Right = Inside Cut Corner
WOOD UPSIDE DOWN on the Left of Saw + Saw angled to the Left = Outside Cut Corner
That pretty much sums up what I haven’t been able to figure out watching more videos then I care to admit. Appreciate you using the Kiss Method. If I made an error - please correct me and I will edit it. Thx. Chris in Kalamazoo
shouldn't it be this
wood right + blade right = inside corner
wood right + blade left = outside corner
wood left + blade left = inside corner
wood left + blade right = outside corner
chughes737 Maybe! I’m almost ready to do more cutting. I’ll test it out.🤣
THANK YOU CHRIS!!!
@@chughes737 You are correct
you have it reversed when material to the left of the saw
Why can't others explain things short and sweet like you sir? My God...lol you're a lifesaver you sir. Thank you!
Erik, thanks for the nice comment. Glad the video helped. Please subscribe if you haven't and have a great New Year!
The best simple and clear explanation about how to cut crown molding THANK YOU!!!! And blessings for everyone!!! 👍🏻
This is perfect. After watching few videos on CZcams I was able cut the crown. However, remembering which side to cut when was confusing. This perfect. U can write it down and just go for it.
For DIY this is great.
Years back I put up this same crown. Made pattern pieces because videos were not too thorough. I literally forgot to do master bedroom ...oops! So now I'm trying to figure out cutting AANNDD I realized I put the crown up on the other rooms walls upside down...HAHA!! Looks good tho. So I will install MB crown the same way the rest of the house is...Upside down! Thanks! GREAT EASY VIDEO!!
Hey Cindy, I know this reply to your comment is late and I'm sorry. I am trying to keep up but it's pretty difficult. Your not the first one that hung crown upside down. Obviously nobody figured it out but you, after watching the video..Glad the video helped you out. Have a great New Year!
Too funny!!
Omg!!! Your a genius!! I just cut my crown molding, I can’t believe it, my husband can’t believe, he said it was too hard to difficult, I just freaking did it!!!! Yasssss!!!! You just saved me $700. Thank you!!!🥰🥰🥰🥰😍😍😍
Well, I really am sorry this response to your comment is so late...Responding to all the comments is so time consuming and I actually have a real job. I am very happy for you and for allowing you to attempt something you thought you could not do. I hope you shared your experience with others and possibly this video!!! Also, glad to have saved you all that money. Are there any other home improvement videos that you would like to see? I'd be happy to make one and give you a shout out! Have a Happy New Year!
Probably watched like 10 other videos by now but they all just rushed thru it and even forgot to mention a few things like flipping the crown mold before cutting... Happy i stumbled across your video cause its a gem! Should be on top when searching for how to cut crown molding! Thank you for the video and going into details with everything, really helped me out ! :)
Thanks a ton! Great walk-through on cutting crown molding for both inside and outside corners.
Best explanation I have ever heard. Good teacher. Very clear. I will tape those maxims to my saw as you have. I’ve wasted too much stock not to.
This was the best crown tutorial I've found. I've watched approximately 1254 of them. The goal for me now is to figure out exactly WHAT angle my inside (lazy susan) cabinet is at. Thank you!!
1 agree with you 💯 percent. Going to watch it a few more times, before I start cutting
You have a good video than other person I am planning put crown moulding inside my kitchen
THANK YOU for this video! I'm fairly handy, but crown molding has been my nemesis for years until this video. GREAT VIDEO! Kitchen cabinet crown installed!
Ed, Glad it was helpful! Thanks for the comment.
This video made it so easy! We watched several others and were about to quit until I found this one. Thanks and great job our project turned out great 😉👍
Everyone else on CZcams just telling you " you have to cut the top side down and cut at an angle" without mentioning that the saw placement on left or right will dictate if an inside or outside cut and just assuming you know that. This is the only one I saw that actually walked through the saw positions needed for each type of corner needed
Very simple instruction you are a great instructor, my project came out great thank you
Hey Robert, glad it helped your project. Subscribe and share, I have more videos coming out soon. Any topics that you would like to see explained? Happy New Year!
This Crown molding cut clips helps a lots thank you sir waiting for more 🙏👍
Great video. I have watched this several times. One add on to my miter I learned by watching was to add a taller skirt and this enabled me to get a better seat on the crown molding (top and bottom). I simply through bolted a 3/8" finished scrap piece of plywood to the fence on the left and right side of the blade (counter sunk the machine screws). Just make sure when you lower the blade that the housing clears the taller fence when cutting at a 45 degree angle.
Mike, excellent video. Was cutting inside corners on crown today, and your video was a tremendous help.
Hey Dale, Sorry so late in responding. I'm so glad to have helped out. Any ideas for new videos? Let me know, take care and have a great New Yer!
Thanks for the information! I watched a few other videos but I came back to yours and kept referring to it. The tape trick is awesome and also writing the notes about which side you are cutting on and the angle of the saw to give the correct cut. Those were key points that helped me a lot. Thanks again!
Hey Michael, sorry for responding so late to your comment. Thank you for letting me know that it helped, make me feel like it was a good use of time for a video that helped many. I hope you have a great New Year and take care.
Best video on how to cut crown molding 👍
Great Mike! Thanks for this crown tutorial. You explained it very simply!
Sunshine, thanks for the comment and glad my video helped out. Love the name! Sunshine everyday.. Subscribe and share, have a Happy New Year!
Very informative tutorial, thanks for making the process so easy to comprehend.
I really needed that explanation on inside/outside corner orientation. Keep up the good work.
Very informative and detailed. I love the step by step.
Richard, thanks for the comments. Glad to help.
Thank you! I have done crown so infrequently that I have to brush up on it and this basic concept will now be my go to for painted crown. (The coping method is what I have used in the past.)
Appreciate your vid!
This helped me alot!!!! After searching for an hr , I found your video and got it!
New subscriber#
Thanks! Great instruction. I needed this to repair a five cut section in an old house.
Great, glad it helped
One challenge not addressed in videos like this are when cutting crown, you're not cutting a 12" piece but rather a 12' piece. Keeping it on the fence perfectly with a piece that long can be difficult and cause the cut to be inaccurate. I prefer and compound-miter cut where the crown can lay flat to cut. All that aside great video, thumbs up from me.
Awesome way of explaining it crown felt intimdating but now i feel like can take it on
Glad to help and sorry for the late response, hard to keep up with all the comments. Subscribe and share, Take care and Happy New year!
thank you so much for your video! I was able to do my crown molding by myself and am feeling quite accomplished.
Tracey, sorry for the late response. You must be so proud of yourself. I know several people that are in the trades and will not attempt crown moulding. Thanks for sharing. Good for you! Subscribe and share, Happy New Year!
Thank you very much sr
You are an amazing teacher 👍🙏
The easiest explanation without a lot of this and that, Thanks.
Best lesson of the year
Omg!! Thank you soooo much!! Best instruction ever!!!
oh my gosh! truly understand it now>> Thank you so much, so well done!
Great video. I will install crown molding and this really helped me. Thank you very much
Where have you been? Best video by far on cutting crown molding
Thank you sir. This was the best instructional video I could find. I’ll be watching more. I had already wasted one 16 ft piece but I know how to put half of it back together. I really appreciate the time you spent on this and your sympathy for us poor DIY SLOBS. 😂
You explain very well thank you so much!
You're very welcome! Thanks for the comment.
MOLDING UPSIDE DOWN
Blade to your right & wood to your right = Inside corner to the right
MOLDING UPSIDE DOWN
Blade to your left & wood to your right = Inside corner to the left
MOLDING UPSIDE DOWN
Wood to your left & Blade to your right = Outside corner to the left
MOLDING UPSIDE DOWN
Wood to left & Blade to the right = Outside corner to the left
MOLDING UPSIDE DOWN
Wood to right & Blade to the left= Outside corner to the right
Inside Corners - longest measurement is always the bottom
Outside corners - longest is always the top
YOU'RE WELCOME! 😁
Thank you for putting this into words. Kind of a type of decision tree…you know if you need an outside or inside and on which side right or left. That is the easy part.
But then once I flipped it over and had it on the saw I would instantly go stupid!! Don’t know how many times I put the crown to the side waiting for a time when my brain was fresher but thinking about it constantly and then second guessing myself and in the end making mistakes anyway and wasting material. Cutting crown is a humbling experience indeed!Thank you again!!
Excellent teaching
Man, very good. And I can just taste that Bosch miter saw! What a great machine.
Simply explained, very helpful.
2:53 You should have spent a bit more time explaining your markings on the miter table. I had to watch it a few times to take notes on the proper blade & molding placement, but once I had it, PRESTO! This simple idea made all the difference for me! That is the BEST part of this whole video. Turned crown molding into a no-brainer!
Gary, I will make another video and zoom in on the markings. There are two more ways I install crown that I want to demonstrate. Cutting the crown flat on the miter table and cutting the inside and outside angles and coping the cut to fit. Thanks for the comment and take care!
Many many many thanks! I had been intimidated for a sec, thought about paying someone...😂 I GOT THIS!!!
Great video thank you 🙏 did my own crown molding watching this video
Good basic video, good camera angles as well. Thanks.
Thank you!!! This was incredibly helpful and greatly appreciated!
You're so welcome! Thanks for viewing
you're such a good teacher, thank youuuuuu
Thank you! That was easy you explain it very well!
Best instruction. Finally get it. Thx
fantastic mike thank you great explanation and video again thanks a million
Wow, this is the first time I’ve watched a video that literally answers every question! I’ll be on your page often I can feel it!
Very nice and informative,
I'm glad I was able to help. Please subscribe and share, hope a wonderful New Year!
Better than this old house instruction. Love to see you do the measurement and mark the piece and put it up. Do you measure your walls first, cut the pieces, then put it up or do you measure, cut the piece and then measure for the next wall?
Important start out with a good saw
Mark, I agree 100%. I would use a fine finish blade if you have a lot of trim to install.
Great video Thank You
Thank you so much for such a great explanation. Im just learning trimwork to get my house on the market and just couldn't figure it out in my head!
Thank you.
Thank you for this video!!
Thank you so much. Very understandable 👌🏾
oh I love you.. thanks you saved me..great help
Hey Shacobyl, I'm glad I was able to help. Subscribe and share, I'll be posting new videos soon and a surprise tool I patented for enlarging existing holes and offset holes. Take care
Thank you, that was very helpful!
Glad it was helpful!
Can you do a video for coping. Basically a 90 degree that I'm installing on craftsman style header over a door way! And demonstrate where to measure please!
Well explained, tk you for your time.
great video
Glad you enjoyed it. I’ll be adding some new videos soon covering more crown techniques to make it simple. Please Subscribe and share. I also designed and patented a tool to widen and offset an existing hole, stay tuned for the demonstration video. Take Care!
Can you please explain angles for crown molding on angled ceilings. No one ever explains it.
I was trying to dope that out myself. I think a speed square or a protractor is part of the answer.
In my case, i was about to just ignore our slight vault and just run straight across, as I'm just running some crown below some existing molding.
I'd take the existing down and use that as a guide, but the previous owner was even more geometrically challenged than I am.
If I needed to conform to the existing line, I'd probably just use trial and error with crap molding, then transfer the angle to the good stuff.
I know there is another way to do this, using the 31 degree markings and laying the molding flat and tilting the blade. Presumably, you'd add the angles, but I'm not sure, and I'm out of extra pieces to experiment with.
This way works, but its only as precise as your ability to hold the work steady when you make your cut.
I'd hate to try addibg an angle while relying on my grip to hold the work to the fence.
As it is, I'm avoiding any situations where I would need both ends mitered other than a 90, as I would be making a big expensive scrap pile.
That was very helpful. Thanks....
Thank you. The video is helpful
Hi Mike, good video. I was just wondering how you put the permanent marker on the blue tape. Did you have to measure the angle between the fence and the tape to be 45 degrees?
I literally had to watch this video for 15 minutes before each cut , I'll NEVER do this again.
What if the corners are not 90 degrees angle? What would you do if it's 93 degrees angle?
A1 indeed cheers
Great video!
Great instructional video. How much extra length would you add to your crown piece for an outside miter that is going to meet an adjacent outside miter?
Thank you!!!!
Does that work with 50/37 crown
Thank you
Too much explanation before beginning the task. By the time you started cutting I was confused with all of the instructions.
I'm new to this and disagree. He spent about a minute on this. Short and straightforward.
did some crown molding after this and all i can say is that it's still tricksy when doing a lot of it.
"SAWSET PROTRACTOR" is the most accurate miter finder out there. No Math. No gimmick.
Do the comparison.
thank you very very much!! You made it clear !
best video!!
Klaymour, sorry for the late response...I'm so behind on comments, but I try and respond to all of them. Thank you for the awesome comment, glad the video helped if you needed it. Please subscribe and share, new videos coming soon. Have a Happy New Year!
One important detail that is seen in the video but not mentioned: The fence where the molding tilts and sit on has to be tall enough to support the molding sitting at 45 degree angle. And the fence should not stop the blade to cut all the way thru (my miter saw is fix and can't get thru !!!, might have to get another one). In this video, the tall fence is made in wood and somehow get attached flat to the metal fence.
Excellent!!
This is great, but all I have is a mitre box and handsaw and am trying to trim a column, which I assume is four outer corners. I tried using foam crown and it was a mess. 😑
When and where does the miter angle use for? You only used the bevel angle. I'm confused. Do I really need a compound miter saw to cut crown moulding or not? I believe that based moulding is easier to cut using bevel angle.
Crown can be cut as I show it in the video, it can also be cut laying flat on the table of the saw. If it’s flat, you would use the bevel of the saw for both inside and out cuts. Not needed if you place the crown on the saw as shown in my video. Hope that helps!
Good mate!
But how do you measure it?
Lets say you need this piece to be 255mm e the other one 243mm.
I really do not understand =/
I stuff up some pieces until I guessed the right position.
Thank you
Very professional, thank you so much it will help me on my project
This was a great tutorial. Thx for the expert vid advice.