I love everything about the build outside of the 3 side fans being exhaust, those should be intake for positive case pressure and more fresh air hitting that GPU to finish out the chimney airflow style of the case. But asthetically very well done
I am no expert by any means, but I guess the 3 fans on the side and bottom are intake. 3 fans at the top and 1 at the back are exhaust. So it's positive pressure.
@@ChosenOneIsBack nope, that's how they should be set up for best performance, but OP wanted the look over functionality. It'll be a more dusty build with all the negative pressure, but it still works
Nice build. Challenge for you. No one in the world has done this. Integration of no wires at all in the case. That means the case becomes part of the connections. Nobody has designed such a case or been able to do that. It is viable and it probably needs going back to the manufacturers to specify changes. At the moment, there is wiring in the back of the case and in the front. I mean no wiring at all for connections. The computer when completed should be able to run properly the way it should nobody in the whole of the computer world has been able to do this yet. If you can, do, you might be able to get round it by turning the motherboard round, but its door wiring to the main power source that needs to go. I mean integration means integration of the case of the appliances you put in the case. Good luck if you can complete it because nobody has done it your call. Thanks for the video. Appreciate them. Keep them coming. Bye for now. Take care of your mates and your family and friends. Take care.
hi, the TUF rgb logo in the front does not turn on, the only unconnected cable is a 2 pin but on the motherboard the RGB header is 4 pin and the ARGB header is 3 pin. In the manual there is not this information. How connect?
I can't get over the cable management, most don't show it, or do a shotty job. Soooo frikin clean
I love that you showed how you cable managed!!!
Best gt502 video on CZcams 100%!!!
Great build, should perform nicely! What was the lcd display? Was it an AIDA64 setup?
I love everything about the build outside of the 3 side fans being exhaust, those should be intake for positive case pressure and more fresh air hitting that GPU to finish out the chimney airflow style of the case.
But asthetically very well done
Lianli don't have reverse pc fans, this set up is more for the beauty
I am no expert by any means, but I guess the 3 fans on the side and bottom are intake. 3 fans at the top and 1 at the back are exhaust. So it's positive pressure.
@@ChosenOneIsBack nope, that's how they should be set up for best performance, but OP wanted the look over functionality.
It'll be a more dusty build with all the negative pressure, but it still works
@@Elaina_Barkhorn there is no "reverse" fans. You just turn it over. Compare bottom fans with all other. They are for intake.
There is now :) @@Elaina_Barkhorn
Nice and cool 😎 built. But why didn't you connect the 6 pin (beside the 24 pin) to the PSU?
Another great build
There is a support bracket into the bundle, why I dont see you are using it?
The songs that you use are beautiful like the pcs that you built
How did you achieve that color in the RGB?
awesome build. I want one
Can you list all the part under the description?
thats one hell of a negative pressure chamber
maybe reverse fans?
How to lit Asus logo on the front of the case?
How much was this in total.
And also why did u change the connection for cpu?
Could you give me a website to buy these same pieces separately?
Thank you for not putting fingerprints on the ram 😂 I would’ve been hurting
I would love to see that negative pressure inside that case!!!
You should provide links for the products
LET'S GOOOO! THANKS!
hello would it be possible to have all the for the products, thank you
gigachad is bacc
Красавчик, чётко!
Там одна только видяха чуть дороже 300 тыс., ежели в рублях... Камень порядка сотки... Норм. комп.
What is the price on a pc like this?
Perfect👍🏻🤤
Absolut cooles Teil. Wo bekomme ich diese Kabel her?
dangggg!!!so good
Nice build. Challenge for you. No one in the world has done this. Integration of no wires at all in the case. That means the case becomes part of the connections. Nobody has designed such a case or been able to do that. It is viable and it probably needs going back to the manufacturers to specify changes. At the moment, there is wiring in the back of the case and in the front. I mean no wiring at all for connections. The computer when completed should be able to run properly the way it should nobody in the whole of the computer world has been able to do this yet. If you can, do, you might be able to get round it by turning the motherboard round, but its door wiring to the main power source that needs to go. I mean integration means integration of the case of the appliances you put in the case. Good luck if you can complete it because nobody has done it your call. Thanks for the video. Appreciate them. Keep them coming. Bye for now. Take care of your mates and your family and friends. Take care.
The best budget resulting best computer😅😅😅 dont forget sophisticated you're psu and rtx 4090 the best you're investment for future😂😂😂👍👍👍🙏🙏🙏🙋
哈哈
👏👏👏
hi, the TUF rgb logo in the front does not turn on, the only unconnected cable is a 2 pin but on the motherboard the RGB header is 4 pin and the ARGB header is 3 pin. In the manual there is not this information. How connect?
connect the 2pin to the separate cable found in the box that turns it into 3pin
How do you get the RGB to look so Gold?
@Tetsujinmustdie but what RGB color code did you set it to?
Music Pls...
Going to fail, you must support that 4090
I cant find that ram
为什么要用微星电源呢?为什么不是一套
他爽就好
How many unnecessary fans you want?
This guy: Every surface as possible please.
Airflow with heat: Which way is the fucking exit!!!
Run them all slow and quiet or use half as many and crank them up for maximum noise, you choose?
el cuello de botella es descomunal :P
Background music >>>>> pc build
Like just for ssd showcase
Edit: Ok dude, leaving small circle of thermalpaste for i9 13900k... Hotspot 90-100C incoming
Lol
That case needs to be ventilated on the side....
чётам по ценнику ?
очень дохyя
They never close the case lol
Because it's horrible to film through glass. All you get is flare and reflection.
When the motherboard costs more than you PC.
Подарите мне такой😢😢😢
bro i dont get these computer buiilders man, spin the gpu fan by hand is already hurting it bruh spin the middle one the other way, fking great
shut up
🤮
terrible