If a house is completely done on 15mm pipe. I want to reduce to 10mm out of the wall on only one radiator in the house. Would I be okay doing this with a 2 column 1600 x 600 radiator? I want to work with the 10mm because it's smaller and more forgiving to work with but on the same note I don't want to cause issues with the radiator heating up because the pipe is too small. Please help, novice Diyer here
For anyone who wants to know what he is using, 15mm x 10mm Pushfit Radiator Valve Chrome Reducing Street degree Angled Elbow.
Thank you for the video!
Please specify the fitting you used on the rad valve to push 10 mil pex pipe thank you
What are those angled type valves called
Top job Michael! Can this be done with 15mm plastic pipe?
yes. just harder to bend
It can just more difficult
What brand of pipe and fittings do you use ?
@mjckitchenandbathrooms ever thing you need to know on Tiktok Chanel
Are they special inserts or just any 10mm flexi pipe inserts
I always us hep
If a house is completely done on 15mm pipe. I want to reduce to 10mm out of the wall on only one radiator in the house. Would I be okay doing this with a 2 column 1600 x 600 radiator? I want to work with the 10mm because it's smaller and more forgiving to work with but on the same note I don't want to cause issues with the radiator heating up because the pipe is too small. Please help, novice Diyer here
You should always go from 22 to 10 mil, but if you are only going to very very short distance in 10 mil from 15, I cannot see that being a problem
Can you do a few in my house plz need 5 radiator changing
Do you live in Crossgates
Did he say 16 wraps?
Yes would not need to work this week
Obviously doesn't reply 🙄
Get over to my TikTok channel