Repiping copper pipe under the floor!
Vložit
- čas přidán 7. 09. 2024
- In this plumbing asmr video I’m moving the pipework to under the floors and cutting out the old pipes for the new bathroom!
Taking out as much plastic pipes and replacing with copper will provide longer life and hassle free for the customer.
Notching the floors for the pipes only above and insulating with hairs felt to reduce noise when system
Is running.
Pressfit was chosen for speed and cleaner system without introducing too much flux etc into the system. I had to solder one pipe as I didn’t have enough to press onto!
Enjoy the video, sit back, like and subscribe if you are new and I will see you on the next video!
I love to see this, good old fashioned british tradesman doing it properly, never stop doing what your doing mate.
Doing our house renovation, I cleaned up the labyrinth of pipes in our boiler cupboard. The room was once a kitchen, but then became a lobby containing the boiler. The people who did the modifications before we bought the house just cut and blanked off old pipes and tacked new ones on. The cold water feed to the upstairs did a complete loop on its journey up!
I’m glad he knows what he’s doing, I wouldn’t have a scooby!!🤔😂
Beautiful. Demolition is my favorite part of any project... Lets you get some physical aggression out
Hahah it’s hammer time!
You did such a great job till you forgot to sleeve the pipes going though the wall 🤦
Everything else was 💯👌
You might not see it but it’s sleaved 👊
Sleaving was pushed back in the wall
@@mmplumber I believe you but millions wouldn't 😉
@@mmplumber and there is father Christmas 😉
@@AlexRocks24-7 🤣🤣🤣
Jointing paste in the fluxuator 👌🏾👌🏾 will be using this
you do really clean work, always looks great. I think you unlocked a new meta with the pipe dope in the fluxuator
Hehe hopefully 🤣🤙😏
Very nice job 👍🏻
Thank you! Cheers!
Lovely job as always. That pipework was a real mess!
Thanks dude appreciate the watch
It's more of a mess now
Great work. Why do you use some soldered and some crimped joints?
Now that’s fckn awesome craftsmanship !!!!
Sou do Brasil ,onde você compra suas ferramentas?
Pode enviar link?
Very nice work. Come from a city where we sweat primarily. In plumbing circles starting to here more on press failures. Don't know if it's tool use or o-rings. More and more use of compression is making its way regardless. Any thoughts?
Impressed but you failed thevexam as no sleeve in the wall.
I need a close up of the paste gun gadget please, never seen one before😮
Your videos are great! What are the markings for at 2:32?
Good job. Just a question i bought a monument pipe bender on the instructions it says your mark should be at the pivot point on the bender but your marks are behind it and you make a perfect bend pls what’s your advice about bending position thanks on the monument benders
If you mark the pipe on where you want to start the bend then it’s at the start of the former. Watch couple of my bending videos mate might get a better idea
@@mmplumber thanks for the reply
Hi can I ask the material you wrap around pipe before soldering were can I obtain some keep the great videos coming thanks
Heat sheald putty
What is the purpose of putting wool under the copper pipes on thd joists?
Removes/reduces creaking noise when the copper pipe expands and contracts.
@@MagicDoughnut I see. Thanks
Nice as always.
Where can I buy these white pipe clips?
Www.ecoclip.co.uk they have started to get to main merchants now
Thanks alot @@mmplumber
@@doityourself1936 no worries mate
Is that the fluxator with paste?
Yeah mate 🤣👍
What’s that’s little attachment you use with the press machine sometimes ?
Sometimes there isn’t room to press at 90 degrees. It allows you to press with the gun at different angles.
Angled jaws, sometimes it’s needed
Why did you solder that one joint??
Too close to the joist to get the press in
@@mmplumberis the blob of goo for heat sink purposes and what is it?
Why do you mark the pipe before you press?
Vous cintré les tube sans les recuire ?
Where are you From
Почему не используете полипропилен?:) проще качественно.
👍
Can you teach me 👌👌
diy plumbers make me laugh
Great job but waste of time and almost a dead craft. Pex is way better
Pex also leaks chems in ur water...but if ur cool with kids having two heads go for it, copper is much safer..pex leaks serious methyl tertiary-butyl ether (MTBE) and tert-Butyl alcohol can leach from PEX in amounts that exceed taste, odor and health guidelines FYI also keep in mind brands of pex leak more but they ALL leak it ... But being that you don't research shit nor basic education and just go with the flow, have fun with those medical bills..😊
That's a absolute pathetic plumbing job