2022 Honda CR-V Oil Change (Quick Guide)
Vložit
- čas přidán 8. 07. 2022
- I Recommend changing the oil & filter every 3,000 miles for the most optimal engine preservation! In this video tutorial we go over how to change the oil and oil filter by safely securing the Honda CRV with the emergency braking system and jack stands! Follow along in the most efficient video on how to do this procedure on youtube with minimal distractions! This how to video is edited in a way that is straight to the point as we guide the viewer on exactly what to do as well as what tools are required for the whole process! Learn everything there is to know about how to change your oil. Even if you know nothing about cars, after this video, you will be able to change the oil in your car yourself. I go over every step in detail and teach you everything there is to know about changing your oil.
#howto #honda #crv #2017 #2018 #2019 #2022 #2020 #2021
Disclaimer:
Due to factors beyond the control of HYDR8D, I cannot guarantee against improper use or unauthorized modifications of this information. HYDR8D assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. HYDR8D recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of HYDR8D, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not HYDR8D. - Auta a dopravní prostředky
Out of all the DIY auto videos I watched, your's has got to be the best, to the point and detailed. No useless fluff. Thanks
I have a CRV also 🙂 mine's a 2017! I love it! We bought two Hondas in December 2016 + haven't had any issues, they've been the best vehicles I've ever had!
Great video- dummy proof and good tip with using the oil from the old filter
Was glad you also showed how to reset the maintenance message. Great video and all you need to know.
I have been changing the oil on my cars for years but learned a couple of new tips from watching this video. Now I also know the details of an oil change on my newer car as well. Thanks!
Well done! I just changed my oil after watching your video! 😀
Glad it helped
Thank you soooo very much for taking the time to make this video. ❤❤❤❤ It was a bit fast in the beginning, but I got it. I look forward to changing my own oil/filter and not having to sit at the dealership for hours or potentially getting ripped off at Jiffy Lube.
@@trishakaaay3720 You got this!
Well done! Thanks for the very clear instructions and good hints. This is all you need to know about DIY oil change.
A very good no-nonsense video. Thank you!
Absolutely amazing video thank you
Nice video, well done.
nicely done
Muy buen video
The Owner’s Manual (on my 2022 CR-V) calls for 30 pound-feet of torque on the Oil Drain Plug. Thanks for the video.
Thank you!
30ft/lbs on the drain plug with a new crush washer.
Thank you guys for watching! I hope i helped someone conquer this mission successfully! Please LIKE the video if it helped!
Can not remove rear phillips head screw to save my life! I just spin the skid plate around, perhaps a blessing. I would love advice! Thanks!
That bolt is next to the catalytic converter. Lots of heat!!! Weld a nut onto that bolt….then it will come out
Thank you!@@TJ321CYA
Does the issue of oil dilution still exist? Does it smell like fuel? The oil looks very thin
most likely yes, but if you change your oil every 3k miles you will be fine.
Is the same Engine 1.5 L 2019 vs 2022 ? 3.7 oil both engine ?
Yes as long as it’s the same body style with the 1.5
What's the size of the filter wrench? Thanks
Get a universal one Eastyard Universal Oil Filter Wrench Adjustable 3 Jaw Oil Filter Removal Tool Range 2-3/8 to 3-7/8 inch with 1/2'' Adapter 3/8'' Square Drive Socket a.co/d/hvODejc
How do u get the fat screws back in the skid plate? Mine wont stick ill have to use fasteners
Hey I had problems with that as well..can you tell me what kind of fasteners you used?
@@Daniel-yd6lm i dont know the name but its those black plastic things that look kinda like fat bolts and you press them thru the holes