How to install your Pinlock Lens

This is a step by step guide that explains how to intsall your Pinlock lens in the best possible way. Easy step by step installation guide for a Pinlock lens.
Before installing the Pinlock lens make sure the visor is clean. Avoid abrasive cloths, (paper) towels, cleaning products with alcohol, aggressive cleaning products and similar items that might cause damage.
Step 1
Remove the visor from the helmet as shown in the helmet manufacturers’ instruction. The pins have an eccentric design to adjust the tension on the lens. Make sure that the pin indicator (little arrow) is facing outwards when installing a new lens.
Step 2
Flex the visor as flat as possible and place the Pinlock® lens with the silicone seal facing the visor, between the two pins. Make sure the silicone seal is in full contact with the visor.
Step 3
Remove the protective film from the Pinlock® lens.
Step 4
Fit the visor back on the helmet and enjoy your fog-free ride!
For more info please visit www.pinlock.com or feel free to contact us at [e-mail].

[@RumbleBrutis]

Super easy to install thanks to this video. Got the HJC C70 helmet.

[@chetansahu5988]

Thanks!

[@dustytriumph]

My new visor came with one post faced in the wrong direction. There does not seem to be anyway to rotate it outwards so the indicator points in the correct direction. Now what?

[@DayneExplores]

Love it

[@J.J.Barrientes]

Dumb question but was I supposed to take the silicone blue wrap off

[@eliasp8645]

Can you do this without temoving the visor off the helmet?

[@Pinlock]

Hi, no you have to remove the visor from your helmet.