Welding Turntable, Automatic Fabrication Positioner
Vložit
- čas přidán 27. 08. 2024
- Part 2 form my Welding Turntable....thank for watching.
I built on a footpedal to stick it on or off and also a switch to shift it from footpedal and manuel mode. I also fixed a hand rest on it.
I had a lot of Aluminum parts for Tig welding and I wanted to try that since i builted it!
I always have to setup the Amps and speed befor the fabrication but than it works really well.
After that I tried it to Tig welding Stainless Steel without wire and Mig Welding Steel, both works also pritty good.
Hope you get inspird for some simular project or so....
If you liked it dont forget to give me a thump up or subscription
Take care Dirk
Wow, are you kidding me, this is hugely impressive! Thanks for the inspiration man
Thank you 😊 you are welcome
I haven't finished copying your welding table yet and now this is even cooler! I cannot keep up with you, but keep the genius coming, it is awesome!
Thank you for that nice feedback 😊 💪🏻
@@TheMetalist do you do it to sell?
@@cristhianboza9450 not this one
@@TheMetalist could you make for sale
@@cristhianboza9450 sorry no time
This is awesome! The first video of the build and this one accessorizing it.
On of the best videos out there!
😁 Thank you 💪
Правильно писал в первой части: "Полезное приспособление". Автоматизация на высшем уровне. Всех благ. Всем добра.
Just when you built a brilliant weld rotator then decide to raise the bar again!! awesome work as always 👍😀
Thank you 😁👍🏻
You are a god my friend ! Wow
I just got amazed by every video i have seen from your chanell
Thank you 😊💪🏻 nice to here 😁
Wow just wow. Such a fantastic design and build! Thank you
I've said it before and I'll say it again: Genius, pure and simple!
Thank you 😊👍🏻
Life doesn't seem so boring after all. Great videos.
Wauw, that is ridiculously cool!
Very nice build 👌. We actually did the same thing in 2009 in our two car garage. 6in s.s schedule 10 with 12" dia bolt base 10' long with 180° turn at other end and two "y" in the middle. Stainless steel carbon scrubber vent pipe for sewer systems. Harder than hell to balance with that macaroni noodle welded to the end.
Not to mention the two "y" in the middle.
Groundings kind of interesting to overcome too
Thank you 😊 Sounds like a a lot of work 😅
You an amazingly talented artist and craftsman! I would purchase this incredible tool.
Thank you 😁
I love the utilization of power drill as motor.
the motor is typical electric window motor from car. or sometimes used as a wiper motor in older cars
That is awesome
I cant wait to make one myself
Thank you for sharing this
There's nothing you can't do that won't make me smile! Cheeky Bugger!
Just here with our #how2wrench minds BLOWN again...wow!!!!!
Thank you 👍🏻
Absolutely amazing job brother. Awesome talent. God Bless
Thank you 😊
such a good metalist master you are. Thanks for sharing.
Thank you 😁
Fantastic man! I enjoyed the content and the videography, thank you sir!
Thank you too for the nice feedback 😁👍🏻
Hey I love your videos
Fantastic craftsman!!
Thank you 🙂
Outstandingly well done ✅👍
Thank you 😃
Dude you’re insanely talented keep up the work!
Thats a big brain right there my dude well made !
you are very clever fellow !!
Thank you 😁
It is Amazon the way you work: accuracy and smart: i love it
Thank you 🙂
That is bloody awesome mate 👍
Thank you 😊
Absolutely brilliant, a real WOW moment.Thanks.
Nice 😁 Thank you 😊
Schwerstens beeindruckend. Wirklich genial. Really Brilliant 👍👍👍
This guys the fkn man, absolutely awesome! Thanks for the material.
Maybe make a list of parts used and where to get them would be a plus on the videos you make... Sweet machine for sure!!!
Thank you 😊 mmhh thats difficult most of the people don't live in same Country
The Metalist even knowing what you used and we could do our own research for the parts would be sweet! I would pay for the list!! Awesome work!
Shortly i will make a Video with all my favorit tools
19.5k subs and i still here! :D
?😅
That is fantastic brilliant 🇬🇧👨🏻🏭
Thank you 😊
WoW now that is a BIG WoW well done
Very nice, I’m impressed
Thank you 😊💪🏻
Very nice work, thanks for sharing
I just found your channel great stuff!
Thank you 😊
Complimenti! Ottimo risultato.
you cheeky bugger haha well done
Thank you 🙂
Weldporn! I like this.
Thank you 💪🏻
@@TheMetalist, guy good luck!
Das ist ja mal sowas von hart geil! 😍😍😃😎🤙🏻
Danke fürs Lob 💪🏻😁
Wow, very nice!
Thank you 😊
great idea , bravo !
Wow awesome machine
Thank you 😊💪🏻
What’s machine u using for the aluminum the same brand as the mug machine?
Yes, its a Rehm Tiger AC/DC 230
The Metalist that’s a sexy little mackine I can’t believe is that doing all that weldt
The Metalist is it the digital one with the screen ?
I'm from Italy
Очень крутая штука!
Instant sub
What the hell man. This is insane xD
Nice vid. Question. Where did you obtain that adjustable layout scale? I like the looks of it alot. Thanks.
excelente maquina personalisada voy a intenrtar hacerme una
Thank you 😁
Very cool and beautiful😱😭
Thank you 😊
Super awesome:)
Thank you 😁
Ez nagyon jo lett.
Only have one thing to say.....Start building and selling them!!!
Thank you 😊 yes the turntable is planed to go in production 😁
@@TheMetalist hit me up when it does
Hit the LIKE button Guys
That is one nice little set up there 👍👍👍
Thank you 😊👍🏻
You just created something a company spend millions of dollars on for a fraction of a price
I have to make it automaticly, at the moment it everything is controlled manuell. But it would be possible 😁
@@TheMetalist although true it is still an amazing accomplishment. Only thing I could think of would be to have the pipe be able to go through the chuck so you could connect a longer piece
A longer one would be possible but the setup will take a bit more time
Excelente top de mais indescritivel a coisa mais perfeita que ja vi em soldas com automatizaçao feitas em casa😎😎😎
Thank you 😁
awesome job, be a bit fidaly to set up but awesome for mas production!!
Thank you 😁 Yes it is, need allways a little testig befor...😅
I have one of those and I would like to use it to bend steel and make scrolls but don’t know how to??
Uhh I don't know if it's strong enough
Amazing man
Thank you 😊
Thats the most beautiful welding turntable I've seen... Btw why do you braze weld so much? I'm new to welding
Thank you 😁
Just for the look😊
Excellent!
Thank you 😊
This is awesome af
Superman ingenious
thank you 😁
Hello! I see, that your MIG welder is kemppi's Minarc MIG Evo model, but what is your TIG Machine ?
Браво!!!
Thank you 😁
Decent love it.. Any chance you could do some Tig Tips and Tricks 🙏 You running pulse on Ali ?
Thank you 😊 Sooner or later i will make a Video for tig welding. At the moment i have some other project for my next Videos
Adding to this, I'd love to see a bit of detail on your TIG brazing, it's my favourite process, but more opinions is always brilliant.
I rebuilt a cast iron mower pulley with it a while back, that poor mower has been abused for over a year, still zero issues.
Did the same on a broken cast iron bracket. Still work.... Love also tig brazing 😊 i have a project in mind with a lot of tig brazing that would be a option to show my tips 😅
I just want to know where you got that ruler that you use in your videos? Keep up the work you really are talented
Thank you 😁
oh man - me too....
Hi same you haven't put plans for this on
FUCKING BEAUTIFUL BROTHER 👍👍👍
Thank you 😁
Hello, Were can i buy one of those lathe Heads?
quick question.. did you integrate the pedal with the existing pwm that you had on there? if so, was it plug and play or did you pull it apart and have fun with wiring? if you ended up using a different pwm with the pedal, can you link it here please? want to build this soon, so cool and such a great idea!
Also, if you were to add this to your etsy builds with the links to the products id buy them for sure! Thank you in advance for your help!
10/10 🙌🏻
Thank you 😁
That is fantastic with my friend. Very impressive. I love your stuff and curious about a lot of your tooling. What kind of table top band saw do you have?
Thank you 😁
Optimum optisaw S100G
cool 💪👍🏻👍🏻👍🏻👍🏻
wow!!!!!!
Nice
Thank you 😊
AMAZING
Thank you 😁
Nice work I like that lay out square you use what is that ? Are you in Europe?
Thanks for sharing !!
Thank you 🙂
The mesuring gauge!?
From Germany
bro you are amazing, you inspired to take up the tig welding style. What tig
machine would you suggest i start off with as a beginner...
Thank you 😁
Which country you are from?
Какую присадку использовали при сварке? Welcher Zusatz wurde zum Schweißen verwendet?
ECCEZIONALE!!!!!!
Thank you 😁
Супер👍👍👍👍
Thank you 😊
Dope💯
Super. Where to bay ?
Thank you 🙂
Oh the whole setup 😅
I get that one switch you installed is for turning it from foot pedal to manual mode. What is the other switch for? Also thanks! Im in the middle of building my own! Waiting on parts
Thank you 😁
Its just on/off 😅
Ah, good. That’s what I would have guessed, but I wanted to be sure it want some super cool feature I wanted also. :)
Dirk, awesome video!! where did you get the orange handle fasteners?
Thank you 🙂 eBay
👍
great Machine , an incline where you sourced the bits would be helpful , plus also the measurements ... thanks or message me and ill purchase the plans
Thank you 🙂 plans will come shortly
Would of took a few goes to get the wire feed just right haha
Yes it allways takes time to set it up? Its not a plug and play ...but if its Setup than its going fast 😅
What kind of pedal is that
Love your work, but how is the mig torch wire feed being controlled? Did you automate it?
Thank you 😁 at the moment manuel but i was thinking to coneting with the turntable 😅
The Metalist awesome, you had me wondering.
At 00:45 what is that measuring tool your using and where an I get one!?
I’ve loved your videos for a long time now and have tried to find that tool and can’t help me out!? Or did you make it? Lol
Thank you 🙂
That mesuring gauge ... do you need inch or mm?
@@TheMetalist inch
What king motor you take for that?
why you hard soldering this project instead tig welding?
Its just for the look 😅
How much for you to build one for me?
WOW !!!!
super
Thank you 😁
Класс ! 👍
Thank you 😊
This is amazing! I would be interested in one of these if you could duplicate it. Would you be interested?
Thank you 😊 i dont know its a lot of work ...