$625 Remote Hydraulics Kit for New Holland Tractors
Vložit
- čas přidán 17. 08. 2020
- Check out the kit at www.TractorInnovations.com
This kit adds remote hydraulics to your Kubota for 1/3 the price of the dealership. You be up and running in as little as 15 minutes with the Plug & Play kit. Everything is included, even the shipping. - Auta a dopravní prostředky
Thanks Andy! I just installed this kit on my 2017 New Holland Workmaster 33. I fix driveways and bush hog fields as a side business. It's great to be able to change the angle of the box blade so I can dig and load top the box blade or smooth out gravel, all without getting off the tractor to manually adjust the top link. Whew! The kit was delivered quickly and was not hard top install. You also sent me a link to get the hydraulic cylinder I needed which was about $70 less than the one I was about to get somewhere else. I had a question during installation and I really appreciate that you answered the phone and set me right in a couple minutes. Great service! Totally recommended. Tractor Boy Ed Nashville, TN
GREAT jOB !!!
Hello Andrew, thanks for the great vid. I just bought a 2004 NH TC35 and want to a 3rd function kit. This kit only offers options for back implements, correct. This system would not work for grapple and front 3rd functions? Thanks!
This will work for a grapple or other front implements. It comes with 8' of hose, enough to run to the rear for remotes, or to the front of the loader arm for a grapple or other implement. You get to choose which circuit to install on, so if you want to be able to operate the lift function + the remote, simply install the diverter on the dump function hoses. If you want to switch circuits later, it's just a matter of swapping the quick couplers.
How would this work if you needed remotes for a backhoe? The backhoe has its own controls so would need constant flow.
Yes, I've had lots of customers use this for constant flow applications. To get the fluid moving, you simply bungee-cord the loader control into a movement position, and you've got flow!
I have a 2007 T1520 - The loader stick is mounted on a platform pad via a solid branch just forward of the right hand arm rest - any thoughts on specific differences for installation?
I'm on your Ebay page now.
:-)
I bet you might have an aftermarket loader. No a problem, I build for those too. I'll just need a few pictures. Send one of the loader valve area and one of a coupler disconnected. I need to see the male coupler fitting clearly. Text or call 541-972-0546
Looking for a nh tn70da
Can u mail me iam interested in a kit for my new Holland tractor 45hp
Hello, looks like a good system. I have an original, un-modified 1996 Ford/NH 545D, 2WD, with front-end loader and this tractor has the heated, enclosed cab with front windshield glass and doors. The loader control arm inside the cab actuates the loader valves from under the cab, so it's somewhat complicated. This is from the factory. Also, the brake pedals are mounted on the left side, not the right side as on a no-cab model. The right front-facing panel of the cab, below the windshield is metal and the loader valve is in front of that metal panel and is mounted to the inside of the loader vertical frame member. So, my question is; can you make a system to fit this tractor that allows me to use the loader control arm as you show in the video ? Are the hoses 1/2" or what? Thank-you.
Send me some pictures. I build everything to order, and I'm sure I can make a solution for you. Include a picture of one of the hydraulic couplers disconnected - I need to see the male coupler fittings.
You can find my phone number and email address on my website:
www.tractorinnovations.com
do U make a Kit to fit a 1986 yr Ford Model 1910 tractor it has the Ford 770B detachable loader
Yes! I actually just did a 1910 for my local dealer recently - he added the hoses to the front for a grapple. We mounted the valve to the fender, within easy reach of the operator, but can install to the dash as well.
I have a 2004 tc40a, will this kit work on my tractor?
Yes, we've done over a dozen kits for that exact tractor. Order online or give me a call.
www.tractorinnovations.com/newholland
I have a TC30 (2003 or 2004, don't recall) and want to use a grapple up front.
If this kit disables the loader functions then I don't see how it would work with a grapple since you'd need full control of the loader AND the grapple to pick up brush etc.
Installation on the “dump” circuit lets you do lift and grapple at the same time, which works for a lot of folks. Then if you need to dump, just pop in the button. Less deluxe than some other options, but at a lower price, and fewer parts that can go wrong, and parts are made in the USA.
Hi I have a new Holland T4020. It has one set of rear remotes. I want to have a front remote for a grapple or whatever. What to you have?
This kit works great to power a grapple, and works on a 4020 just fine. Most customers install it on the "dump" circuit so that when you've got the knob pulled, you can lift/lower and control the grapple at the same time. If you need to adjust the dump angle, just pop the knob back in for a second. This comes with 8' of hose to reach as far forward on the bucket as you need.