@@The_Racist_Stonerobviously not if you can see he is visbly holding back while trying to cut the paper you can see it in his others videos as well if you actually take the time to inspect him trying to cut the paper it becomes extremely obvious
Are you the kind of person who believes anything you want to believe? Because you seem like one to me. @@kobeproductions22 You can clearly see he's trying to cut the paper, and it doesn't work. He's not a dummy who just tears the paper anyways, after seeing and feeling the edge won't cut into the paper. But hey, you do you; believe what you want. lol I am not here to argue with naysayers anyways.
Ikr I gotta buy new knives each day dude they just waste away in a day. That's 500 per day my boy but I can't stop because I gotta hold on to the dream man. Gotta.have.knives.
Literally a knife killer. For a reference knife would be sharper if you dont sharpen it for 5 years, than after 5 days of using one of this inventions, + you ruin the blade for good, it equivalent of cutting on metal surface like the one in kitchen.
Still.. its better to buy knives for 30-50$ and sharpen them for 3 minutes and change them every 5 years, that sharpen expensive knives every week for 30min lol Talking only about home use in the kitchen ofc :)
I have a bunch of these type sharpeners but rarely use them, Only if I cant use a strop or a steel on it, Then i might give it a few passes on the stone and go back to the steel/strop. Then these are kinda last resort like if I'm out in the woods with only that. Just because they're light and compact. But otherwise i agree
Lmao I am SO glad we were ALL taking notes Don't forget the 2 "Oh's" at the beginning, those were the most informative.. probably... 📝 ✏️ !!! Hope you all learned something today!
@@joshsinglefooterno. Pull through a are already set on an angle and instead of grinding off evenly and sheer off the face from both sides. It’s sharp from all the tiny jagged edges and not a flush thin edge
@@joshsinglefooter the pullthrough design itself is simply not good for maintaining a straight and even edge. yes it puts an edge on the blade, but its jagged and ripped up even after strop. youre always better off just getting a stone.
Plus it’s well understood that carbide knife sharpeners remove way too much metal and don’t produce long lasting edges because they use the burr to cut.
@your_favorite_ranger im no expert but those wedge sharpeners take some of the metal off the blade when sharpening. Over the long term you will not have any blade left. A wet stone, on the other hand, re straightens the bent/dull blade
@@wideputinofficial9094You are completely wrong with everything you just said. To sharpen any knife you have to take material off of the blade. When you need to sharpen a knife, you use for instance, a whetstone to get rid of the old edge and create a new one. The reason why the sharpener shown in the video is bad is because it takes off way too much metal as compared to a whetstone. The only reason it was able to be sharpened quickly is because it took off way too much metal.
@@your_favorite_rangerit makes many many micro bevels, the v notch removes a lot of material also. It will require you going down to a low grit stone and working up grits to get the edge back and then stropping of corse
“Give me six hours to chop down a tree, and I’ll spend the first four sharpening the axe…like that, that, that, that, that, that, that, that, that, that, that, that, that, that, that, that…” -Abraham Lincoln
Field sharpener*…. This is not something you want to regularly use on all your knives at home…. at home where you have access to things like a spyderco sharpmaker, a belt sander, actual sharpening stones etc you should use these things….
@@boopieboi439 depending on what grit… you can use an extremely fine grit to prevent this. You can take too much metal off a knife with stones as well depending on the stone.
@@nickgates4387using a belt sander is stupid, good way to ruin the temper on your knife and the edge if you dont know what your doing. Most people that sharpen on a belt sander use a jog and constantly stop to dip the knife in water to prevent ruining the temper
And you are one of the stupidest humans on earth. No sane person would use a microscope to sharpener knives. Especially if you’re a real man out doing real man work.
People really forget the purpose of these pocket sharpeners and pocket knives. Idc if the blade on leatherman is gonna wear out 6 months sooner than the dude who only uses stones. If im on a job and my blade is duller than i need then this tool works perfectly for a fast sharpening and quicker finish on the job
@thecrazyhobos Bro whetstone fanboys are fucking crazy. Yeah, they're better, Idgaf. I'm never spending more than $50 on a knife *set*, I don't need a whole ass setup to sharpen the damn things
Посоветовал бы пользоваться данной точилкой в туристическом походе на пару дней,чтобы на природе чутка подправить лезвие. Но на постоянной основе лучше такие не использовать.
As good as me, well, I don’t know of any. But then I am an awful lot like Maverick top gun. You know, just do don’t think. By the way I went to that movie 14 times. Good movie. 😊
It is. It is the best friend for an ATC knife. Hunting hiking camping fishing survival. Just the best. I can even make a knife out of the back of a bandsaw blade in under 10 minutes. I have been shot from fingernail clippers. Cuticle scissors. All types of serrated edge knives. It’s just the best.
Thanks for the concern the thought watching and a comment. I have never cut myself while sharpening. I am really good at it. I have cut myself while handling the knives. Often I just forget to respect the cutting edge. Most of my knives are insanely sharp.
Not when you sharpen app. 240,000 knives in the last 20 years like I have. Anything that is handed to me. Thanks for watching. Thanks for the comment. Have a great day.
Brad ! It looks like a lot of the Viewers of your channel would like you to tell them name of your knives you are sharpening along with the knife steel thank you !
I like these, but my truth is they'll work well on cheaper, softer metal knives. I bought it to try on my bench made that's 152cm and it actually dulls it. I know stones are the best course of action, but it's way harder than your dad , grandpa, or hunting buddy makes it look to be
@@saldomino1639 I have only seen one knife that was almost impossible to sharpen in 19 years. It was a very thick 1940s Gerber military survival knife. It was very thick.
@@bradbuckner9496 I said it works fine on softer metals. It's 20 dollars for crying out loud. I have no skin in this? It doesn't sharpen my 300 dollar Benchmade because the metal is too hard. How dare you call me a liar. TURN OFF COMMENTS IF YOU DONT WANT THE TRUTH! If you read my other comments , I got a good edge on my Walmart type knives, but I also said,”in my experience “, I wouldn't use these on expensive, high carbon content knives. And I stand on that. It didn't ruin my knife, just dulled it a bit. I bought that rolling knife sharpner , then finished it with a strop and I can go from cutting hides to tomatoes, but I'm not going to cut tomatoes with my Mel Pardue
@@ffrreeddyy123456 make me a bet say a couple thousand dollars that I can’t do what I say I’m doing. That will be very easy for you to do if you believe your own BS. Have a great day thank you for watching.
Carbide has a place in sharpening blades, just dont use it everytime. It works great to reprofile a blade, but once you've got your blade set maintain it with a whetstone for the love of God!
@@saldomino1639 Yeah I have a decent carbide sharpener made by Sharpenal in my sharpening kit. Works great, but if someone got carried away with it they could easily remove too much steel!
In a lot of ways I’m just like Chuck Norris. And Donald Trump. And for 72 years old. I am in really good shape. Thank you for watching. Thank you for commenting. Have a great day.
There is only three types of people that think they could sharpen a knife in 60 seconds; the moronically hubristic. the intentionally deceitful. or those who genuinely do not understand anything about edge geometry (and do not care about destroying their knives)
lol what’s up dude. I see you in all types of different comment sections. I get a kick out of this bozo doing these tests. I have yet to see someone brave enough to hand that guy any decent knife.
And the people who talk like you just did, that are totally full of crap and probably have to use a microscope to sharpen your knives. And by the way you sound I guess you’re totally full of crap. Have a good day. Thank you for watching.
Thank you. That is because I am super talented at hand sculpting a blade. If you sharpen about 120 knives a day three days a week at least three weekends a month for 20 years, I am better than just about anybody can comprehend. I was a welder fitter fabricator master of building stuff out of steel for 45 years. Thank you for the comment. Have a great day.
That is because you’re ignorant and have absolutely no comprehension of how to use my sharpener. You’re just dumb. Thank you for watching. Have a good day.
That slight of hand on the first cut, he bends the paper away from the cutting edge to make it appear that its so blunt it just pushes the paper over 😂😂😂 i caught you!!!
![Knife Restoration [Purpleheart Handle With Violet Epoxyd Liner]](http://i.ytimg.com/vi/L4PZlQIIkaE/mqdefault.jpg)
Guy has mastered the art of making it look like hes actually trying to cut the paper first time round
Obviously not if we are able to see him do it 😂
@@The_Racist_Stonerobviously not if you can see he is visbly holding back while trying to cut the paper you can see it in his others videos as well if you actually take the time to inspect him trying to cut the paper it becomes extremely obvious
Are you the kind of person who believes anything you want to believe? Because you seem like one to me. @@kobeproductions22
You can clearly see he's trying to cut the paper, and it doesn't work. He's not a dummy who just tears the paper anyways, after seeing and feeling the edge won't cut into the paper. But hey, you do you; believe what you want. lol
I am not here to argue with naysayers anyways.
Who hurt you?
It was a dull blade
he stopped testing it on the paper as it started cutting lmao
Yeah right i saw it too!😂😂😂😂😂😂😂😂😂😂😂😂😂😂
White privilege
Bc it was ripping the paper not cutting it, you want a nice smooth cut
@@vanillat5613 stop
@@vanillat5613 bro he did it in 45 seconds
NO actual knife enthusiast uses that type of sharpener. IYKYK
Those are for housewives and guys who buy their knives at Walmart
For anyone not yet informed, it destroys the geometry of the terminating edge which begets the need to reprofile the entire blade.
They're just wretched.
What's the best way of maintaining a high quality blade?
@@Soul_Contract learning to sharpen. Unfortunately there are no shortcuts.
The knife industry LOVES these sharpeners. Guarantees you’ll be buying new knives every few years whether you want to or not.
Only the incredibly stupid people who miss use my sharpener. Are you one of those incredibly stupid people. Sounds like you are.
Ikr I gotta buy new knives each day dude they just waste away in a day. That's 500 per day my boy but I can't stop because I gotta hold on to the dream man. Gotta.have.knives.
Literally a knife killer. For a reference knife would be sharper if you dont sharpen it for 5 years, than after 5 days of using one of this inventions, + you ruin the blade for good, it equivalent of cutting on metal surface like the one in kitchen.
Still.. its better to buy knives for 30-50$ and sharpen them for 3 minutes and change them every 5 years, that sharpen expensive knives every week for 30min lol
Talking only about home use in the kitchen ofc :)
I have a bunch of these type sharpeners but rarely use them, Only if I cant use a strop or a steel on it, Then i might give it a few passes on the stone and go back to the steel/strop. Then these are kinda last resort like if I'm out in the woods with only that. Just because they're light and compact. But otherwise i agree
Like that,that,that,that,that,that,that. Then we do this,that,this,that,this,that,that,that that,that"
Right! Lol. Real helpful, that is 😂
My wife
My friend when I ask how to do a certain in-game mechanic:
@@michaelaguilera3191😂
Lmao I am SO glad we were ALL taking notes
Don't forget the 2 "Oh's" at the beginning, those were the most informative.. probably...
📝
✏️
!!! Hope you all learned something today!
I’ve seen a blade under a microscope after being sharpened with a similar sharpener, I’ll never use one.
Similar. But not this one.
@@joshsinglefooterit’s the exact same thing and ur a moron if you fall for the knife sharpening booth at a trade show.
@@joshsinglefooterno. Pull through a are already set on an angle and instead of grinding off evenly and sheer off the face from both sides. It’s sharp from all the tiny jagged edges and not a flush thin edge
@@joshsinglefooter the pullthrough design itself is simply not good for maintaining a straight and even edge. yes it puts an edge on the blade, but its jagged and ripped up even after strop. youre always better off just getting a stone.
@@HelioV1 the stone is the straight side.
The way he was sawing the knife into the sharpener lol
A genius at making himself look skilled
Plus it’s well understood that carbide knife sharpeners remove way too much metal and don’t produce long lasting edges because they use the burr to cut.
dude can you stop coping and just admit it was pretty smooth? Like just stop, you're embarrassing yourself. Just stop...
@@maozedongaming Why did this trigger you ? Have you bought a carbide knife sharpener ?
@@Biketunerfy Ur a know it all
@@maozedongaming and…? You do realise it looks and sounds like your jealous.
@@Biketunerfy You're a smartass know it all, you know nothing. Just stop.
How to destroy your blade in less than 60 seconds
just use a stone or steel
How does this destroy the blade? By changing the bevel??
@your_favorite_ranger im no expert but those wedge sharpeners take some of the metal off the blade when sharpening. Over the long term you will not have any blade left. A wet stone, on the other hand, re straightens the bent/dull blade
@@wideputinofficial9094You are completely wrong with everything you just said. To sharpen any knife you have to take material off of the blade. When you need to sharpen a knife, you use for instance, a whetstone to get rid of the old edge and create a new one. The reason why the sharpener shown in the video is bad is because it takes off way too much metal as compared to a whetstone. The only reason it was able to be sharpened quickly is because it took off way too much metal.
@@your_favorite_rangerit makes many many micro bevels, the v notch removes a lot of material also. It will require you going down to a low grit stone and working up grits to get the edge back and then stropping of corse
I rather just use the bottom of a mug, or the top edge of a truck window
“ Give me six hours to chop down a tree and I will spend the first four sharpening the ax.” -Abraham Lincoln.
😂
“Give me six hours to chop down a tree, and I’ll spend the first four sharpening the axe…like that, that, that, that, that, that, that, that, that, that, that, that, that, that, that, that…”
-Abraham Lincoln
"Give me 6 hours to chop down a tree, and I will spend the first 4 furesly ending in the park." - Abraham Lincoln
Field sharpener*…. This is not something you want to regularly use on all your knives at home…. at home where you have access to things like a spyderco sharpmaker, a belt sander, actual sharpening stones etc you should use these things….
A belt sander will take off alot more then this carbide sharpener. Just use a leather strop and stones to maintain an edge.
@@boopieboi439 depending on what grit… you can use an extremely fine grit to prevent this. You can take too much metal off a knife with stones as well depending on the stone.
I agree this sharpener is a good touch up sharpener it puts toothy edges on your knives then you have to strop it to remove the burr !
@@boopieboi439
I agree ☝️
@@nickgates4387using a belt sander is stupid, good way to ruin the temper on your knife and the edge if you dont know what your doing. Most people that sharpen on a belt sander use a jog and constantly stop to dip the knife in water to prevent ruining the temper
He didn't even attempt to cut it properly in the first place
He never does.
Exactly!
At least this "attempt" was more believable than most I've seen before. Still obviously didn't try though
But was still able to cut it 😂
spend $100 on the worksharp sharpener and never worry about dull knives again, and you’ll have more consistent edges
Уровень заточки Кухонных ножей не порезатся 😊
Noway I would let this guy touch my blade !!
How to ruin a good blade in 30 seconds! I wouldn’t let this guy near my knives.
Ruined it? The knife came out sharper than it went it
@@homer5103 then you are the one he will target, easily fooled
@@moderngrub1876 not really
I sharpen my own knives
Ofcourse because you have good knives
@@homer5103 search ‘what a pull through knife sharpener does to your knife’. Then tell us if it’s better, dare ya.
Smooth like butter
"How to completely ruin your knife edge 101" should be the title of the video.
Man looked straight in to the camera and said done 😅
That's absolutly right.
The blade is done! You can go buy an another one😂😂
Sharpening knives. What a life !
My turn: Brings An entire Damascus Scythe
The trick to sharpening a knife is to make it less dull.
Good job I like your comment.
Pull through sharpeners ruin knives
No
looks like it worked
Yes they do ... @@godhimself3208
Why is that? Just curious
@Roberob1189 you never pull it threw perfectly ruins the bevel and tears up you're edge
If he sharpened the knife using a stone in 60 seconds instead then that would be impressive….
i love his little "uh oh" at the start
When handing him the knife, he should've pointed the sharp end away
The knife was closed. SO, what are U talking about?
Such an authentic and unmanufactured interaction
That you.
how wavey is that blade under the scope? This is an example of how to F up a blade.
And you are one of the stupidest humans on earth. No sane person would use a microscope to sharpener knives. Especially if you’re a real man out doing real man work.
I like the shirt... as much as the sharpening.
It's not the shirt, as much as the rack it is hung on. HA HA. Thank you 4 watching. Have a great day.
This is very captivating!
Thank you for watching. Thank you for the comment. Have a great day. Remember the days are usually what you, make them.
It was probably sharper before he ground it back and forth and swiped the stone on it ruining the bevel he just made 😅
People really forget the purpose of these pocket sharpeners and pocket knives. Idc if the blade on leatherman is gonna wear out 6 months sooner than the dude who only uses stones. If im on a job and my blade is duller than i need then this tool works perfectly for a fast sharpening and quicker finish on the job
Or just like pick up any porous rock and touch it up
@thecrazyhobos Bro whetstone fanboys are fucking crazy.
Yeah, they're better, Idgaf. I'm never spending more than $50 on a knife *set*, I don't need a whole ass setup to sharpen the damn things
@@VinDoyNewfr
@@VinDoyNew that’s because you don’t have $50.
@@EZ_Caseso spend more on the sharpeners and not a 'good' knife....ok
chinese d2 it is
Посоветовал бы пользоваться данной точилкой в туристическом походе на пару дней,чтобы на природе чутка подправить лезвие. Но на постоянной основе лучше такие не использовать.
бро)
В турпоходе наждачная бумага свернутая в трубочку справится с этой задачей на порядок лучше.
Ben practicing razor sharp nice
Have you got any, let's say students that can do a good sharpen demo?
And better yet, can you teach a random person to do a decent demo?
I have many people that have owned these for years and keep their knives sharp.
That's a no😂
As good as me, well, I don’t know of any. But then I am an awful lot like Maverick top gun. You know, just do don’t think. By the way I went to that movie 14 times. Good movie. 😊
Edge geometry? What's that?
Seems to me you got edge ocd. 🤭
@@Leftyotism not OCD. But I do keep my knives edge the same angle when sharpening. If you alter the bevel then the blade doesn't perform as well.
Clearly sounds like ocd to me. ;) @@Druku1977
you sound RTD @@Leftyotism
Lol, and the instant insults, how grown up. @@corneliusthecrowtamer1937
Man lost more time just trying to pick up the damn sharpener😅
Looks like a great product.
It is. It is the best friend for an ATC knife. Hunting hiking camping fishing survival. Just the best. I can even make a knife out of the back of a bandsaw blade in under 10 minutes. I have been shot from fingernail clippers. Cuticle scissors. All types of serrated edge knives. It’s just the best.
Cant help but feel like "knife sharpening speed-runs" are a good way to accidentally lose a finger.
Thanks for the concern the thought watching and a comment. I have never cut myself while sharpening. I am really good at it. I have cut myself while handling the knives. Often I just forget to respect the cutting edge. Most of my knives are insanely sharp.
Not when you sharpen app. 240,000 knives in the last 20 years like I have. Anything that is handed to me. Thanks for watching. Thanks for the comment. Have a great day.
Brad ! It looks like a lot of the Viewers of your channel would like you to tell them name of your knives you are sharpening along with the knife steel thank you !
I like these, but my truth is they'll work well on cheaper, softer metal knives. I bought it to try on my bench made that's 152cm and it actually dulls it. I know stones are the best course of action, but it's way harder than your dad , grandpa, or hunting buddy makes it look to be
Brad ! What kind of Steels can you sharpen?
@@brianpoling1430 What you said is NOT true. YOU dulled the edge because you are NOT learned with my sharpener. Admit it. You did the dulling.
@@saldomino1639 I have only seen one knife that was almost impossible to sharpen in 19 years. It was a very thick 1940s Gerber military survival knife. It was very thick.
@@bradbuckner9496 I said it works fine on softer metals. It's 20 dollars for crying out loud. I have no skin in this? It doesn't sharpen my 300 dollar Benchmade because the metal is too hard. How dare you call me a liar. TURN OFF COMMENTS IF YOU DONT WANT THE TRUTH! If you read my other comments , I got a good edge on my Walmart type knives, but I also said,”in my experience “, I wouldn't use these on expensive, high carbon content knives. And I stand on that. It didn't ruin my knife, just dulled it a bit. I bought that rolling knife sharpner , then finished it with a strop and I can go from cutting hides to tomatoes, but I'm not going to cut tomatoes with my Mel Pardue
This deserves an award.
You just presented it to me. Thank you. Have a great day. Thank you for watching.
He almost forgot it was a 60 second challenge! Could tell by the way he puts it down real quick and says, Done! 😂😂 can’t wait to try this
How to get a free sharpen speedrun
This ruins your blade.
Give him more money dude. You must apreciate him
Outstanding!!!
Thank you.
Met this guy years ago and he is the nicest. God bless you, brother, praying all is well with you
It does not make the product work. He’s a great guy but he’s selling something he believes in while it in reality is not that way.
Hello brother. All is very good with me. My life is great. And I have one of the best jobs in the whole world. Have a great day. God bless you.
@@ffrreeddyy123456 make me a bet say a couple thousand dollars that I can’t do what I say I’m doing. That will be very easy for you to do if you believe your own BS. Have a great day thank you for watching.
He didn't even try on the first test
tried to make it not cut!
Friendship is a sheltering tree.
vlogger: and that's how you get a free knife sharpening
Carbide has a place in sharpening blades, just dont use it everytime. It works great to reprofile a blade, but once you've got your blade set maintain it with a whetstone for the love of God!
I agree it’s good to reprofile a blade then if you want to get it hair splitting sharp you need a whetstone and a strop !
@@saldomino1639 Yeah I have a decent carbide sharpener made by Sharpenal in my sharpening kit. Works great, but if someone got carried away with it they could easily remove too much steel!
Ridiculous.
@@saldomino1639 WHY. Do you mention Hair splitting sharp when that is NEVER mt intentions. YOU always TRY to DRAG me into your BS.
Just exactly like a coarse grit stone. So what are you saying.@@x7slim8x
Way better than an 800 euro watercooled elektric sharpener 😂😂😂
You are very correct. Thank you for watching.
So very true.
Wow, Chuck Norris !
Have that same stiletto, bought it a long time ago, love it
Steps to sharpen:
That
thAt
THat
That
ThAt
A little bit of that
And THAT
This is what im searching for
Thanks for explaining all that
Well put. 😂😏🌈👍
You.forgot about, and we do "this" that that that
That man's a badass with blades
Thank you for the comment. That man is just simply bad ass. Yeah all that follow me for years. Have a great day my friend.
I know this is a somewhat odd comment but he reminds me of my late grandfather who left me a really cool looking pocket knife when he died
In a lot of ways I’m just like Chuck Norris. And Donald Trump. And for 72 years old. I am in really good shape. Thank you for watching. Thank you for commenting. Have a great day.
MY DAD WOULD HAVE LAUGHED HIS ASS OFF NO 😂😂😂😂
What knife is that? It looks very nice!
Stiletto Knife
There is only three types of people that think they could sharpen a knife in 60 seconds;
the moronically hubristic.
the intentionally deceitful.
or those who genuinely do not understand anything about edge geometry (and do not care about destroying their knives)
lol what’s up dude. I see you in all types of different comment sections. I get a kick out of this bozo doing these tests. I have yet to see someone brave enough to hand that guy any decent knife.
I work for buck and I can give you a razor blade In 23 seconds 40-50ish on s30+
You forgot about those that have an IQ above 70 and know how to use a grinder.
And the people who talk like you just did, that are totally full of crap and probably have to use a microscope to sharpen your knives. And by the way you sound I guess you’re totally full of crap. Have a good day. Thank you for watching.
@@EDCsteals😂😂😂❤
This is super satisfying to watch.
Thank you. That is because I am super talented at hand sculpting a blade. If you sharpen about 120 knives a day three days a week at least three weekends a month for 20 years, I am better than just about anybody can comprehend. I was a welder fitter fabricator master of building stuff out of steel for 45 years. Thank you for the comment. Have a great day.
Never use any knife of value on a pull thru sharpener!!!
Except if they have moving rolls on them with no carbides.
That is true if you are very low, intelligentence when it comes to carbide Sharpeners.
Usually he does an incredible job of getting a nice secondary bevel but this might be the least convincing one I’ve seen
I have NO secondary bevles on my blades.
He has you at OH OH!!! 😂😂 hustler move 😂😂
15% sharpening 85% "that"
💀😭
Это не заточка, а порча вашего ножа. Я точу на арканзасах и обожаю финальный результат
Stop sloppin it up bro
Tell me exactly what that supposed to mean, bro.
Run when you see these guys at a gun show.
I think it was actually blunter the second time he tested it!
That knife sharpener is not worth the money
That is a perfect response. Coming from an ignorant uneducated person. Well spoken.
That is because you’re ignorant and have absolutely no comprehension of how to use my sharpener. You’re just dumb. Thank you for watching. Have a good day.
Great way to get your knife sharpened for free
I sharpen about 120 knives a day at the shows and do not charge. I do get tips for a job well done. Thank you for watching.
The Dude has gotten into knives
that that that that, tha tha that thaa 🎵🤘🏼
OPENED THE COMMENTS AND IMMEDIATELY SAW A BUNCH OF NERDS SHITTING ON THE SHARPENER JUST LIKE I SAID IM A GODDAMN GENIUS
YEP.
That was impressive
I'd love to see this guy use an Old School Wet Rock!
Sharpening a knife is basic kitchen skills everyone should know. Why is this so interesting to people?
If knives get sharp that fast, they're gonna dull that fast
I didn't know that Chuck Norris had recently started sharpening knives commercially
He just rolled the edge doing that last part. He'd never sharpen any of my knives.
Dudes having fun 60secs-10 equals 30 second knife challenge
Хороший нож из хорошей стали так не наточить.Сталь мягкая...
Сколько раз ты посмотрел это видео?
- нак, нак, нак нак накнакнак....
Bro, getting his blades sharpened for free by making it a game.
Awesome!
Как не разал, так и не режет 😁
I can’t stop watching this!
That's good. From Brad Lee Buckner my self..... Thank you. Have a great day.
How to get your personal knife sharpened for free in 60 seconds 😂
This guy has been using this sharpener for years how will someone just trying it do
Reminds me of my urethane scraping days back when I used to replace windshields.
сначала резать бумагу как ракал , а после заточки как нормальный человек , это конечно гениально 🤦
And the look on this dude face as he hands it back you is, priceless. 👏🏻LMFAO
Jacob Snell sharpening his knife to kill Darlene.
Went from spoon to a butter knife. 🎉
Дайте ему сталь с закалкой больше 62. Пусть заточит за так быстро)
Ayee i have the same knife, i also got friends of mine the other colorways for Christmas.
Bro just got a free knife shapening lol
good job chuck
That slight of hand on the first cut, he bends the paper away from the cutting edge to make it appear that its so blunt it just pushes the paper over 😂😂😂 i caught you!!!