I saw a machine at SEMA like 5 years ago that could do this in 10 seconds without touching the rim itself ever. Meanwhile I’m stuck in ancient times using 3 people and bars to do this
Damn near look like he was taking a tire off a 55 gallon drum LOL and he has got very nice equipment all we had was a couple Tire bars and a big tire hammer and lots of muscles.
That machine does all of the work for you. You only need to lock it on and tell it where the edge of the wheel and the sensor is. You might have to push a little to get the bottom bead of the new tire on, but the rest is automatic.
are you fucking serious? i could easily take that tire off that wheel by myself, and with the machine at my shop, which is not as fancy as the one he is using, will still get the job done. i guarantee any tech from my shop can easily swap that tire. either you dont have a lot of experience or youre just around a bunch of morons.
Do you think 12 gallons tank can inflate flat 21 inch tire and get it on the rim after tire change ? If i just prefill air tank with any compressor and run cheapest tire changer machine from 8 bar air tank
Hahahahah sem contar quando riscam a roda na hora de colocar pneu de perfil baixo, que a parede lateral é reforçada... Estragaram minhas tsw nurburgring
One time, I did three sets of 35x12.50 R20 tires all before lunch. They were 10 ply tires. One of them was a dually. It was a regular machine, not one of those automatics.
That single wheel and tire combo is worth more than my entire car.
😂
The tire alone is worth more than mine…$1,200 for a Michelin Pilot Sport 355/25R21
Love how this tire machine even lifts the tire on the hub. Soo sweet
But you have hunter revolution that is robot changer
i work with it for year the fuction feels lame end up not using it its faster and better and not that hard to put rim yourself
I have one Corghi Artiglio from the 60's. Still working perfect today. Quality stuff 👍.
I saw a machine at SEMA like 5 years ago that could do this in 10 seconds without touching the rim itself ever. Meanwhile I’m stuck in ancient times using 3 people and bars to do this
Awesome job without damaging the rims and the tires.
Very good, accurately and slowly, without harm to the customer.
I don't know any tyre place in the world that harms the customer ;)
While on camera at least..
На таком одно удовольствие работать. Он себя оправдает в легкую
That is the best Tyre machine every.
No bars to rip your wheels.
That one is too complicated we also have a corghi lever less one but there’s literally one button moving the automatic lever
Super machine & mechanic👍💪👍
Dayummm. I love wide tires, those look mean. Besides 405s, this is the nicest setup I've ever seen
Damn who's running 405s 😅 and I thought my 285s were wide af
@@LeJunny
The widests I've seen is 365mm.... Bugatti Veyron.
Damn near look like he was taking a tire off a 55 gallon drum LOL and he has got very nice equipment all we had was a couple Tire bars and a big tire hammer and lots of muscles.
I used to work in such a place and you really need to know what you're doing to not damage the rim.
Obviously...i mean this wheel costs as much as my whole car
With those machines? It basically does it for you. That would be 10x easier than the shit I have to use
That machine does all of the work for you. You only need to lock it on and tell it where the edge of the wheel and the sensor is. You might have to push a little to get the bottom bead of the new tire on, but the rest is automatic.
Also you need to be careful not to break the tpms aswell because for a new one could be $100
The generic tire changing machines ain't gonna to cut it, or cut the wheel they would. That is a wet dream machine.
sacret dimension.bonjour la note en sortant.du garage.felicitation bravo 👍👍👏👏👏bye du mans sarthe72 FRANCE chao.
Phat. Ass. Meats.
Love these wide ass tires! Like the C7 running on 375s!
Bien la machine surtout .
Excelente trabajo....
Everyone needs these.
Fantastic!!!!
Nice machine
damn that machine is high tech campared to the ones we use at discount tire
Awesome!
Good job guys vous faite une belle job :)
I saw a car with 35 series tires and thought it was nice and low profile, but this is 25!!! Damn
I like the machine 👍👍👍
I love to see supercars wearing wide tires like those.
Awesomeness
Thicc boi's
We can only hope the Techs that work on our cars are this good.
PAUL F I am that good
I love this video
Super stroj i práce, ale za tu dobu mám 2 zadky a na autě 💪
I bet my car wouldnt go Anywhere with These huge tires😅
Крутой станок!!!
Good video
That what you call a steam roller!
Pierwszy raz przyjechał samochód na wypasie to trzeba pokazać na CZcams jacy jesteście super firma
Canada, Québec nice
ohh man i cant believe this... watching this until end...
Damn...I used to have 315's on a Mustang and thought they were huge, but this takes the cake
The Veyron tires were even wider...365
Sacré morceau
В Москве или Питере по любой такой есть в эксплуатации. Уровень работы и подхода богатейский.
Станок супер
Sweet
Doing the right thing taking those P-Zeros off...
Would love a machine like this at work.
Tip Top Champ
I like that machine, have a similar one in my shop
Your so cool.
@@anabolicmindz2177 you're not so cool.
@@DjQwEEkPTinBF :( sigh
this is machine for not destroyed whells ...
I had a stroke trying to read this.
I had a stroke trying to read this.
Интересно сколько стоит такой акуенный станок? Ни каких монтажек и прочей шляпы! Мега культурная работа!
полтора ляма
Четверо казахов заменяют этот станок, они руками разбирают колесо Ламборджини без применения инструмента. :)
Cool
That’s good width , I’m going to put those on my kia.. it’ll look mint..
Nice tire machine!!!!!! Still a huge burnout left on the tire though.????
That’s wide af
almost twice wide than ive got on my car xD
King that’s what she said.
Get your GED and learn NOT to use "af" in every sentence.
@@Panthera-Uncia ok boomer.
@@shadowthehedgehog4737 Boomer yourself, I am younger than you.
That one tire is as wide as two of mine lol
cool
How did that break the bottom bead!?AMAZIN
мне такие на девяточку подошли, прям как с завода
Они как раз как девяточка))
И ты после этого. Проснулся.
Мотор девяточки эти колёса не сможет стронуть с места!
Мощного
Chance of finding a Tech that skilled in the states - 1 in 10,000.
what?! this is pretty much 80% machine, 20% of knowing when to use what knob. or are you saying techs in the states can't even remember these steps?
gwot maybe I should have said "careful". I've had Techs hack up multiple rims over the years.
ah that i agree with. Even in Canada, half of the techs just don't care
gwot bingo!
are you fucking serious? i could easily take that tire off that wheel by myself, and with the machine at my shop, which is not as fancy as the one he is using, will still get the job done. i guarantee any tech from my shop can easily swap that tire. either you dont have a lot of experience or youre just around a bunch of morons.
That's cute
Эти колеса круче самой ламбы)
Станочек прикольный
Офигенный аппарат!!!!!!!
Looks like a low profile super-single lol
Какие широченные
My car use 155/65/r14 XD
André Knudsen Aqui 175/65r14
L.Urus ?
cheap ass car
You got a mirage eh? 😂
@@mathaaushle like your Comment 😂
Nice, always wondered if there was a centre locking tyre remover. Better than those wank#rs at kwikfit leaving marks all over your wheels
What a redicilous size
God and I was scared to even do corvette wheels
The sun glasses in a garage....white😂😂😂😂
Das sieht ja einfach aus😂👏👍👍👍😎
Kannst ja mal zu uns in dir Firma kommen und mal ne Vorführung machen. Mal gucken wieviele Montageköpfe du abreißt.
THICC
Do you think 12 gallons tank can inflate flat 21 inch tire and get it on the rim after tire change ?
If i just prefill air tank with any compressor and run cheapest tire changer machine from 8 bar air tank
thicc
Servicr advisor be like customer waiting, needs if back asap
Holy shit
Do they balance the wheels on the cars ?
Québec !
Quero ver ter uma máquina dessa no Brasil... aqui é na marretada!
Hahahahah sem contar quando riscam a roda na hora de colocar pneu de perfil baixo, que a parede lateral é reforçada... Estragaram minhas tsw nurburgring
Tem pow aqui em são paulo tem diversos modelos e tipos desde os mais simples como uma dessas.
Star Trek :)
That's a custom tire machine designed for custom large diamator wheels like these
타이어값 어마어마하겠다 물론 구하기도 힘들겠지만
holy tyre
Most tyre garages struggle to fit ps4s’s that are 245 and above 😂
31545r22
One time, I did three sets of 35x12.50 R20 tires all before lunch. They were 10 ply tires. One of them was a dually. It was a regular machine, not one of those automatics.
Shadow the Hedgehog 35x12.50R22 daily. Fuck those.
@@SMD-si7fm I've done those too. The biggest truck tire I've mounted was a 38x15R18. I've also mounted 16 ply truck/ trailer tires.
Oha
Wah tipis ya untuk tipe ngebut 🤔
The TPMS….. I bet its worth more than my car
Machine: corghi
Eye protection: sun glasses
Hotel: trivago
Been doing this over 20plus years and would love the opportunity to learn/use a REAL high tech, quality tire machine!!!
20 yrs n u never use a real good machine where uve been 🤣🤣🤣
@@newyorkboss6124 shut the fuck up
@@newyorkboss6124 7 years in a still havent seen one in a shop other than sema and the hunter training center lol.
@@3511manlyman we have an older hunter tire machine, it’s ehh
@@cristopherespinoza1791same
Cuanto salen las llantas que estas cambiando para mustang dime precio por celulsr porfavor
А чего ты не взял монтировку и прям по диску надорвал покрышку, чтобы аж глубокие царапины остались?! Как делают на большинстве шиномонтажей!
Ахахаах потому что не в России))
Ive got 225/40r18 looks funny af against this XD
Bugatti Veyron uses 365er Tyres at the Rear :D
Those tires lookd still hella good
Cristian Camacho they may have been too old and dry
Wymiana na zimówki.
355 holy shit
Thought the guy would be wearing a white suit and gloves to change that lambo tire.
와 장비 직이네
Many people are surprised with this size on a 300.000 € car. my 2006 x5 d sport has 315/35/20 from factory.
Wow.
155/70/13 on my Fiat Punto 😂
Should be 155/80/13 ;=)