NOBLE Performance JDM Style DRL / Turn SignalFog Bezel | INSTALLATION | SUBARU | 2022 | 2023
Vložit
- čas přidán 22. 11. 2023
- Jim walks you through a step by step installation of the Noble Performance JDM DRL/FOG LIGHT bezels for the 2022-23 Subaru WRX.
The provided wiring harness eliminates the hassle of activating the factory connectors!
Noble Performance JDM Style DRL / Turn Signal Fog Bezel Pair Subaru WRX 2022-2023:
www.importimageracing.com/pro...
Noble Mini Low Profile ATM Add a Fuse:
www.importimageracing.com/pro...
Giveaway at 10k Subs!! (Cosmis Wheels and Silvers Coilovers)
Import Image ➡️ tinyurl.com/y2uwsz92
Cosmis ➡️ tinyurl.com/y6sx7fyw
Silvers ➡️ tinyurl.com/y4wq9uc8
Give a Like 👍 / officialimportimageracing
Follow us 🔥 / importi / importimageracing - Auta a dopravní prostředky
i was skeptical about he silica black, but it actually looks great
Can these wired to run the amber as DRL instead?
Installed as per instructions one side works one side doesn’t wiring is connected as the video instructs and to the add a fuse all connections are fine why would only one side work?
Why did my check engine light turn on after the install?
Awesome! They look fantastic. Do you have info/instructions for using the existing wiring?
I made my own OEM plug by making a loop that wires back to itself with a fuse in the middle, then pining it to the same type of plug as the one under the foot well(not sure what kind as I already had it lying around). The point is to just complete the circuit and have a fuse for safety. Worked for me though you will still have to splice the turn signal wire as that is not part of the built in loom.
We don’t have instructions for using the OEM wiring because the kit comes equipped with its own proprietary harness. But our buddy Cody has something that might help you out!
czcams.com/video/8_HpIfQQYPw/video.htmlsi=D5WjBH7QKn_Os5hy
Is there a way to fix the “Off timing” flashers? Turn signal and bezel aren’t flashing at the same rate.
Yes, the DRL lighting is LED while the factory turn signal bulb is halogen. Replacing the factory turn signal bulb with a aftermarket LED bulb should resolve this issue! 🤘🏻🤘🏻
When are they gonna be available in the site with the sport grill?
April 15th eta
What if you need to take off the bumper again could the lights be disconnected without having to disconnect the yellow wire
This is a really great question! The Bezel lighting has been updated to include total plug-n-play connectors. This allows you to simply press and release a clip to separate the wiring for future service.
Question, I’m installing the bezels, for the add a fuse, do you have to have two 10 amp fuses in both slots? And do both have to be in for the led light to function?
That is correct. You need the fuse from the original circuit, then an additional 10amp fuse for the bezel lighting.
How feasible would it be to cut the “fake grille” in the bezel and replace it with mesh…?
if you have a base you cant you'll have to buy all the hardware and it will cost more than the kit by far.
Any idea when they’ll be back in stock??
rn
I tried to install these today on my GT model and for the life of me I cannot figure out how to do the turn signal thing. I think maybe the headlights are different?
I do believe "GT" models are equipped with different headlight wiring. Email Support@importimageracing.com for the best wiring solution!
Is this any different for a limited? How would I get the turn signal?
I was going to try splicing it to a yellow wire that is visible on the limited light wire loom which I assume is the turn signal wire. Unfortunately, I didn't get the chance as my set didn't fit correctly even after I received some extra hardware provided by Noble and ended up having to return them. I will probably just get the OEM.
For the add a fuse did you have two in there or just one
To clarify, are you referring to two fusses in one add-a-fuse?
is there a reason to not simply use the OEM plugs then go under the dash and use a jumper to connect the for light switch wiring to bypass using a switch and just have everything work as is without using any new fuses?
That’s a perfectly fine way to do the installation as well.
Make sure you install a fuse on that jumper. It would be nice if you could buy that jumper separately, but unfortunately Subaru parts told me they don’t sell it separately.
@SuzukiKid400 I've ran it so far without can you give me an idea of what I should buy?
Where do the wires go in the fuse box?
The answer to your question lies between 8:40-8:50 in this video.
Any idea as to when these will be back in stock??
Literally ANY DAY NOW! We have a shipment coming in SOON! 😍
@@ImportImageRacing awesome! Gonna have to get my hands on them ASAP 🔥
Why don't the turn signal lights sync? That would drive me nuts.
The factory turn signal bulb is a halogen bulb while the new DRL lights are LED. This means every time the factory bulb is activated it takes several milliseconds longer to warm the filament to a visible glow compared to the instantaneous shine of the LED light. Compounded with multiple on and off cycles the lights become “out of sync”. Converting your factory turn signal bulb to a aftermarket LED bulb will solve this issue! 🤘🏻🤘🏻🤘🏻
why did my engine light go on after this
This is too much work for me lol
Appreciate the honesty!