How to remove a clutch
Vložit
- čas přidán 26. 07. 2023
- In this video I will be showing you how to properly remove all of the parts in a car to be able to get to the clutch. This can be a big expensive job so why not try to do it yourself and save money/become a gearhead!
Jump to spots in the video:
00:24 What is a rear main seal?
00:51 Why should you change the rear main seal?
01:35 How to replace the rear main seal
06:07 How to install a new throw out bearing
09:15 Test fit your clutch plate on input shaft
09:40 Installing the machined flywheel
11:50 Cleaning and installing the clutchplate/pressure plate
14:06 Installing the transmission and the lower transmission to engine bolts
15:45 Installing the rear engine mount
16:20 Installing the cv axles
16:43 Installing the lower ball joint
16:33 Installing the cv axle nuts
17:56 Install the wheels
18:30 Installing the new transmission fluid
19:53 Installing the under engine cover
20:08 Installing the last transmission to engine bolts
20:28 Connect the 2 electrical connection at the back
20:37 Install the transmission cable bracket, wire loom, cables/clips
22:20 Install the starter motor, the main positive cable, and the solenoid trigger wire
23:02 Install the clutch slave cylinder and brackets plus ground cable
23:50 Install the driver's side transmission/engine mount
25:00 Remove the engine cradle and install the engine cover
25:25 Install the air box and ducting/purge solenoid/MAF sensor
27:41 Install the battery carrier and battery
29:38 Check the pedal height and test drive
This is another episode of a new series on how to become a GEARHEAD! If you have ever wondered how people know so much about cars and are absolutely crazy about anything with a motor, then this is a great series for you. This is geared towards people that have no knowledge of cars but want to learn; however, the content in my videos does try to make solid connections between theory and practical applications so even seasoned gearheads will find the info useful. Tired of paying other people money to fix your car? Then ya gotta learn this stuff!
If you have any questions about the video, please feel free to comment and I will get back to you as soon as possible. Time me....
These links will take you to the parts I used in this video/filming gear and help support my channel! As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
Canon M50 camera amzn.to/3x53c3v
Rode Wireless Go 2 amzn.to/46eIzl2
If you would like to keep up with behind the scenes info, pictures, and videos, follow us at / way_of_the_wrench
If you enjoyed the video and/or learned some cool tech tips, I would appreciate a share out on your social media so I can be inspired to create more videos and continue to make better content for you guys! Thanks for watching and if you hit the post notification bell, you will know when our next videos are out!
Very special thanks to Guillermo Vargas for all of his work on the new "How to Become a Gearhead" intro. Super stand up guy who offered up his services and came through big time once again. Thanks bruh! It looks amazing. If you are looking for some custom advertising or graphic design of your own, hit him up on his Instagram Guillermo Zevallos Vargas or his website www.vargasportfolio.com/
Music for this very special episode by :
Music To Wear Fingerless Gloves To by Punch Deck
punchdeck.bandcamp.com
Promoted by @RoyaltyFreePlanet - royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense
INTRNLCMD - Seasons:
• INTRNLCMD - Seasons [S...
INTRNLCMD - Coastline:
• INTRNLCMD - Coastline ...
Song: LAKEY INSPIRED - Chill Day (Vlog No Copyright Music)
• LAKEY INSPIRED - Chill...
Thanks to Teknoaxe for his royality free music for our outro music. Please check out all of Teknoaxe's sweet music tracks!
www.teknoaxe.com
Outro music is Sythwave E
www.youtube.com/watch?v=RBxnY...
My Line - Synthwave - Royalty Free Music
• My Line - Synthwave - ...
Way of the Wrench is looking for a collaboration with any CZcamsrs out there hard at work making royalty free music, just send me a message with your link for consideration. If you have a tool/product that you would like us to review or use in our videos, send me a message to discuss details.
Disclaimer: These videos are intended for entertainment and inspiration. Working in a woodshop, metalshop, or autoshop is dangerous without proper safety and experience. Always seek professional advice and training before using any power tools/machinery. If you have any uncertainty before performing any shop procedure, stop and learn a safe method/technique. Do not attempt anything simply because you saw it in one of my videos. Be smart, use common sense, respect your power tools/machines, and be safe. - Jak na to + styl
Did my Yaris’s clutch by myself. Learned so much alone the way. Thanks!
Awesome! You're very welcome. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Glad your clutch job went ok. Thanks for the watch and the support for the channel. Cheers!
I've been wrenching for almost 40 years as a hobby, but got some good ideas here: turning the axle nut backwards to hammer (instead of using soft-face hammer), the blocking of the flywheel using the pin (instead of making a device), and the closed end wrench as lever extension on the ratchet (instead of getting out the breaker bar). Interesting...
Glad you appreciated the tips from my experience in the trade. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!
I used boxes to isolate all parts when I take them off.
😮
Thanks!
Beautiful work, but don’t forget to cover your nose when next you do a clutch job. You don’t want to be inhaling those nasty old stuff from the clutch assembly.
Thanks! Yeah not a bad idea to put a mask on but the big trick is to not use an air wand to clean it all off and get it airborne. Glad you liked the video, if you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and welcome to the channel!
Please sir, kindly do some videos on suspension components removal, repair and replacement I.e springs, dampers, sway bars and links etc. I have seen many videos on this on CZcams but I am damn too sure that yours will be different in terms of quality and excellent delivery. Big up to you genius!
Seems strange when its not a pinball video you are doing lol
Nah....I'm a massive geek who loves to work with my hands. Automotive, welding, metalwork, woodworking, electronics....pinball. It's all fun and if you like how I teach the pinball stuff, wait till you see my other stuff! Pssst! There are 4 or 5 vpin videos coming....Thanks for the watch!