John that's the business. excellent demo and explanation about hard wood angles ... I work with soft pine and keep mine about 22 degrees. You've got a nice jig there I put my saw in a vice and put a plastic wedge in/ on the bottom home coming chain. I can't tell you how happy I and to have gone square ground. faster, easier ... The one problem is telling people they are going to have to get really precise with their angles. If someones got problems with round files keeping a chain sharp, most likely they will not be to successful with square. Good luck to you and thanks for keeping square ground alive on you tube you've nailed it with that file. Hope you have a Simington 451C for a major touch up.
That is a nice chain vise! Great idea using a vice grips! I gotta check out your other videos for more on that vice, otherwise you should post a video about it.
This is a chain for homeowner saws, and as a homeowner in the Southeast who doesn't really count wood by the cord czcams.com/users/postUgkxbs4FIpzuLyOJe2SesfbtvXi1CTnUXroD I have this (or 20BPX) on several saws at different levels of smallness. I've never felt that the safety chain is holding me back. I buy multiple chains, and when the installed one doesn't feel grabby enough, I file it, then throw it in a cup of gasoline while I rotate to the next one. I have yet to file one down to the wear lines, so I feel like I'm getting my money's worth, and I'm happy about this new 3-pack - although, at this rate, it's going to be awhile before I buy another. I don't know why I would try anything else.
I like to use a six sided file. I sharpen each edge of the chain has its own entity. My file is all over the place and I put a variable pitch in the top edge and you can inside age depending .. If you roll your file your side edge can be any with that you want
Just a warning to any viewers: while watching this video, I touched the screen when he zoomed in on the chain and it was so sharp it cut my fingers through the screen
I just got into your sharpening techniques recently John, (God help me🤣) anyway, one issue I’m having is scraping the bottom of the file to the raker. Am I at too low of an angle, it seem really close to what you’re demonstrating here.
Just in case anyone cares, the German speaking guys at the bottom are asking about 325 chain, what file. And,, I guess triangle file is better for the little chain.
My friend you tap the file it's a good 👍 habit to do it gets the access metal off of the file, it's a good habit to have as well, that is one shap tooth as well!! I appreciate your content as well!
I’d have gone much smaller than 7/32” and much closer to you top plate (but on the inside of it) angle. The way that you show it is a hindrance to cutting activity but the way that I suggested is helping it cut. Just sayin…
Too much sharp chain isn't efficient because after one or two minutes it goes dull and not ideal for hardwood, but but save lots gas and time for short time
Wird er wohl nicht hinbekommen. Bei einer kleinen teilung sind die triangel/hexagon feilen einfacher zu handhaben. Auch bei größerer teilung schruppt er ganz schön in die verbindungsglieder. Da fehlt noch etwas übung.
Ich hab für 325 das granberg 106b benutzt, mit einer triagel/hex feile geht wunderbar. Freihand geht auch ist aber hackelig. Mit dem granberg siehts aus wie maschinell.
Auf amazon com, kostet es zzt 39 dollar. Ist aus ganzmetall und verwendet kein plastik, wi zb stihl. Manchmal tauchen exemplare bei e bay auf. Ich hab meins aus usa von amazon.
John that's the business. excellent demo and explanation about hard wood angles ... I work with soft pine and keep mine about 22 degrees. You've got a nice jig there I put my saw in a vice and put a plastic wedge in/ on the bottom home coming chain. I can't tell you how happy I and to have gone square ground. faster, easier ... The one problem is telling people they are going to have to get really precise with their angles. If someones got problems with round files keeping a chain sharp, most likely they will not be to successful with square. Good luck to you and thanks for keeping square ground alive on you tube you've nailed it with that file. Hope you have a Simington 451C for a major touch up.
I love your stump vice setup. Been messing with different things, and think you nailed it here!
That is a nice chain vise! Great idea using a vice grips! I gotta check out your other videos for more on that vice, otherwise you should post a video about it.
This is a chain for homeowner saws, and as a homeowner in the Southeast who doesn't really count wood by the cord czcams.com/users/postUgkxbs4FIpzuLyOJe2SesfbtvXi1CTnUXroD I have this (or 20BPX) on several saws at different levels of smallness. I've never felt that the safety chain is holding me back. I buy multiple chains, and when the installed one doesn't feel grabby enough, I file it, then throw it in a cup of gasoline while I rotate to the next one. I have yet to file one down to the wear lines, so I feel like I'm getting my money's worth, and I'm happy about this new 3-pack - although, at this rate, it's going to be awhile before I buy another. I don't know why I would try anything else.
Cut my eye looking at that tooth. Jedi master of chain sir
I like to use a six sided file.
I sharpen each edge of the chain has its own entity.
My file is all over the place and I put a variable pitch in the top edge and you can inside age depending ..
If you roll your file your side edge can be any with that you want
Just a warning to any viewers: while watching this video, I touched the screen when he zoomed in on the chain and it was so sharp it cut my fingers through the screen
Dam it I read your post to late I cut a finger and thumb😆😬.
Интересная методика, надо попробовать. Спасибо! 😊
VERY NICE 👍👍👍
I just got into your sharpening techniques recently John, (God help me🤣) anyway, one issue I’m having is scraping the bottom of the file to the raker. Am I at too low of an angle, it seem really close to what you’re demonstrating here.
It's hard to avoid some of that just don't cut the chain in half......
What is the part number for the file you used? Thanks
Oh my... that looks sharp
What brand, and name is those files you are using? Cant seem to find similar files in Norway.
Vallorbe
Laffilatura a squer grund con lima trapezio è molto difficile e spesso ci viene la becca di gallo e molti toccano troppo le maglie giunzione
Just in case anyone cares, the German speaking guys at the bottom are asking about 325 chain, what file. And,, I guess triangle file is better for the little chain.
Would have been nice if you had done your video a bit longer, looks good, how long does the teeth stay sharp?
That all depends on what type of wood you're cutting
Until you run it in the dirt.
Sir is tool ka naam kya h
do you have a video showing your chain holding jig?
There are several videos in. My videos
Где купить этот напильник
Can some tell me where i can buy that and do i need a special chain also or i can sharpen regular
You need a full chisel chain. End a square file
Chain with 90° teeth
My friend you tap the file it's a good 👍 habit to do it gets the access metal off of the file, it's a good habit to have as well, that is one shap tooth as well!! I appreciate your content as well!
I’d have gone much smaller than 7/32” and much closer to you top plate (but on the inside of it) angle. The way that you show it is a hindrance to cutting activity but the way that I suggested is helping it cut. Just sayin…
Ne yaptigindan cok elini gorduk yaptigin isi gosterecek bir video cek
Too much sharp chain isn't efficient because after one or two minutes it goes dull and not ideal for hardwood, but but save lots gas and time for short time
Hey man how do get ahold of you ? I need to talk to you !
Got a phone number
Super Info..
Greetings from Germany Peter
😎👌
Why not reshoot when you have more time and someone to help with camera
Where can I get a file like that
Madison's Washington State
@@reillystsb Madsen’s?,
Google it !
You mean there are still people that don’t know how to do this? 😜🤣👍🏼
One time i do too mamern nem did too
Is this working?
It works like hell!
You get about 10-20% faster cuts but the danger rise equaly.
Hey, sehr gute Arbeit. Mach doch mal ein Video von einer 325 Kette mit Doppeltrapezfeile 💪
Wird er wohl nicht hinbekommen. Bei einer kleinen teilung sind die triangel/hexagon feilen einfacher zu handhaben. Auch bei größerer teilung schruppt er ganz schön in die verbindungsglieder. Da fehlt noch etwas übung.
@@dackelschnappel2372 ja, aber schneiden tun sie...bekommst du das hin mit 325?
Ich hab für 325 das granberg 106b benutzt, mit einer triagel/hex feile geht wunderbar. Freihand geht auch ist aber hackelig. Mit dem granberg siehts aus wie maschinell.
@@dackelschnappel2372 hey, wo bekomme ich das Granberg denn her, im Netz finde ich nichts
Auf amazon com, kostet es zzt 39 dollar. Ist aus ganzmetall und verwendet kein plastik, wi zb stihl. Manchmal tauchen exemplare bei e bay auf. Ich hab meins aus usa von amazon.
❤👍🤝
What is the number of that square file you used please!