No Nonsense Guide to Chainsaw Sharpening. How To Sharpen A Chainsaw Properly. FarmCraft101
Vložit
- čas přidán 14. 05. 2024
- Chainsaw not cutting well? We can fix that. If your chainsaw doesn't cut after following the directions in this video, I'll eat the chain. And the saw. Ok, maybe not, but I guarantee you will be able to make your saw cut better after watching this. How to sharpen cutting teeth, adjust the rakers or depth gauges, check and file the bar, check the oiling port, all in one video. And in a brief, no nonsense format. If you found this video useful, please consider supporting the channel! Patreon for small monthly contributions, Buymeacoffee for a one time tip, or just do your amazon shopping through my store. Links below.
****Links to sharpening equipment in my Amazon store: *****
www.amazon.com/shop/farmcraft101
Felling dead trees adds a LOT MORE DANGER: • No Nonsense Guide to F...
Full Chainsawing playlist:
• Chainsawing 101
No Nonsense Guide to Tree Felling:
• No Nonsense Guide to T...
How to Chainsaw Like a Boss:
• How To Chainsaw Like a...
MERCH STORE!:
www.farmcraft101.com
Patreon:
/ farmcraft101
Buy me a coffee- or a beer!
www.buymeacoffee.com/farmcraf...
Facebook:
/ farmcraft101 - Jak na to + styl
An object lesson in how to make an information video; clear, concise dialogue, and perfectly focused camera work. This guy should have his own TV series.
Clear, concise dialogue, and perfectly focused- he'd fail in politics.
He does!
And some suttle humor
Yes, what fantastic clarity and a great choice of examples to consider. If you can't sharpen a chainsaw or figure out why a blade isn't cutting well after this you need to get someone else to do your cutting for you! :-)
@@ricksgarage8069 Haha
I just accidently stumbled across this video. I am a long time...30 plus year, professional chainsaw user. This is hands down, the best chain sharpening video I've ever seen. It's clear, the close ups....I've never seen that in a video before....are perfect. THIS, is how you hand sharpen a chainsaw. Wow. Thanks FarmCraft101!
I don't even use a chainsaw. I've watched this 5 times now .
I have same thing to say..
@@vicstein288 Haaahaaa Right !
Is there a certain diameter file I should use? Or maybe that's dependent on the chain?
I came across your video by chance, so glad I did.
Far and away the best demonstration of chain maintenance,
now I understand the "why" everything makes sense.
Your explanation and demonstration is the best I've seen,
Gonna get at my chain first thing thanks.
Well....i just learned more about chainsaws in the last twenty minutes than i have over the last twenty years. God damn. This video isn't just about sharpening, it's about the engineering of cutting with a chainsaw. Awesome. Thank you
OMG! It took me nearly an hour to find a chainsaw video that explained how the chain cut and not just the anatomy of the chain. And he has up close clearly focused video! TWO THUMBS UP!
Holy crap, best sharpening video on CZcams! Nobody else shows a close-up of the rakers or explains the chain anatomy so well for those of us still learning! THANK YOU!!!
We are all still learning I have been using chainsaws often for 45 years
Totally agree finally found someone with knowledge and common sense. Thank you.
Absolutely agree! A model "how-to" video..
Yes, the best video by far!
Agreed. I've watched about a dozen and I wish I just watched this one and none of the others.
I worked as a logger for several years in my youth. Needles to say, it was very hard work. Our saws were only turned off when they needed fuel. We touched up our chains every time we gassed up. We only took off enough metal to get the job done. The boss bought chain in 25 foot rolls. At times we used a Stihl 090, with a 72 inch bar. Often it wasn’t long enough for some of the enormous trees we cut down! I found this to be a very informative video with some great advice.
It helps to have a few spares as well then sharpen at home but that is more to carry and ya i agree buy by the role and make your own i was afraid to watch this vid but he did it right
@@011CJ I have priced out chains by the roll, and find them to be quite expensive. More cost effective is to buy your chains at sale prices, of any length. When you need a new chain make the chain from the any size chains that you have bought on sale. Of course it helps to run the same chains on all your saws. I use skip/chisel 3/8 0.05. Get a chain rivet spinner and you will be set.
Aaaaaaaaaa4aaaaaaaaaaaaaaaàaaaasàaaßẞ££s£$s££s£¥№#5£££45££#£s
Kkkkkkkkj
Kkkknkkkkkkkkkkkkkk
My father in law was just that good ! He always would touch up the chain every time that we would gas and oil up ! I would always tell him you have the right touch 😍He taught me everything that I know about chain saws! I miss him when it comes to cutting wood, he knew so much trees.
I am NOT a professional. This video, and then 10 mins with my Stihl MS170, and it cuts like new again. Much more importantly: I fully understand exactly how the chain works, and will be able to effectively sharpen and maintain any chainsaw bar and chain from now on. Thanks!!
I just sharpened mine in 10 minutes. Wouldn't cut at all yesterday. After following your instructions, today it's cutting like a champ. Thanks a million. Sharing .
That was one of the best, most comprehensive, and clearly narrated instructional video I have ever watched. Awesome!
Agreed
Indeed. This was wonderful.
This is the best, most comprehensive chainsaw sharpening video I've watched so far. Thank you! BTW, my late husband once DID put the chain on backwards, threw a fit when it wouldn't cut, and never tried to use it again. Wasn't till after he passed away and I needed it that I found out what he'd done. I do all the sharpening and maintenance work now on the tools. (Machinist in a former life)
Way to dis your late husband.
🙄❤️
❤️
@@nervousordo Well, he was a putz on one issue, but I wouldn't judge his intellect on one statement. Lots of accomplished people have little mechanical aptitude, and sometimes people with simple mechanical skills accomplish amazing things. The Wright brothers invented the airplane. They owned a bicycle shop - my former trade.
Ok I'm sorry hun about this, but he's actually doing it wrong, though he does have his angle right, but you don't slide it straight, as your doing the push stroke you turn your wrist, you only have to make about 3 to 4 strokes that way ! Give it a try ! 😉 also if you're making a straight cut on a block of wood, if your cut goes crooked it means you have one side sharper than the other! 🤫😉🤗
As a DIY guy, I've been hand sharpening, but had no idea what I was doing until watching your video. Now I know why the chainsaws weren't cutting properly and can go fix it. I'm so glad I stumbled across this video randomly. The algorithm knows....
Thank you for teaching me how to sharpen my chainsaw. This is great skill to have. I'm 65 years old, and this proves "you can teach an old dog new tricks". Thanks for the lesson.
Having sharpened chains since the early 70s, I would suggest wearing a leather glove on the hand you are pushing the file with. I have cut my right hand pointer finger a number of times when the file slipped a little. That's when a duct tape and toilet paper bandaid comes into play.
I agree, I always use a leather glove on my back hand. I’ve got plenty of scars to show why lol🍺
I am heavy construction mechanic field service.My neice played a joke on me.One of my co workers got a cut on a finger.Dugged out my first aid kit for adhesive bandage for a finger wound.Ahhh..Power Puff Girl bandaides...the guy actually liked the bandages.lol
I’m with you on that good advice I slipped and it was a trip to A&E for some stitches 🧵
Sound advice! Thanks
a chain cut is different. that shit hurts for weeks
I am a retired sawdoctor, this is by far the best layman’s explanation I have seen and listened to. Nothing wrong with a very small pair of calipers to help a learner, and a 7inch slim taper file for the rakers , gives you three sides to wear out .Well done mate !
> sawdoctor
It's been a while since I saw a doctor
@@BoilersRock What a cutting remark......
@@makattak3550yours was pretty good too. I Stihl have to say @boilersrock ‘s was treemendously better though.
I wish all videos on how-to could be this perfect. Ain't you just the most perfect Presentor ever!? I sharpened one chain in my life and now I know why it won't cut.
Still the best chainsaw sharpening video out. You just saved me money that I would have spent on a sharpener I don't need. I'll be getting the right size file and doing it by hand and getting a good flat file for when the rakers need to be shortened. Thank you!
You’re the first person, in all the videos I’ve ever watched, to address the burr that can form on the bar… Thanks from Australia 🇦🇺
As a chain saw user, this is the best, clearest, most
logical and yet simplest how too video I have seen in a long time. Thanks
I’m a chainsaw newbie, using a battery powered saw for cutting limbs and small trees. Thank you for explaining so carefully and pointing out all the additional checks to make. I love the generosity of skilled tool users on CZcams.
Agreed
He seems like he’s done it before. I’d recommend wearing gloves,, especially if you’re ever stuck filing with just the file and no guide or handle for your file.
Working with my first chainsaw and this was exactly the video I needed. You're a great teacher. Thanks!
For those learning to file, I recommend a husqvarna roller guide. You can see what’s happening as you are sharpening and practice for freehand. Also the depth gauge guide matches each DG/raker to it’s individual tooth so teeth to not have to be all exactly the same length, such as in the case a few get severely damaged. Also, there are two options for raker height depending on type of wood, saw power, and length of bar. 🤙🏻
I agree, the teeth do not have to be the same length. Just set all of your rakers to the same height and it will cut straight.
@@j.d.wilson7134 …each raker same height in relation to each tooth. Husky roller or progressive gauge like WCS
There are plenty of good videos on this subject, but few this great. Your language is straightforward and easy to understand, you back it up with clear visuals, and your sequencing is perfect. Thank you for taking the time to share your knowledge with us!
After 67 years I have finally learned how to sharpen my chainsaw. Will sleep good tonight!
Well, now I know why my chainsaw cuts to the left. I thought I had not sharpened the left side enough, but upon examination, I notice the left cutters are much shorter than the right. So I guess I've OVER sharpened the left cutters. You're a good teacher.....
One of the most practical videos on sharpening I have seen. No garbage only the basics.
I always use the pointed edge of depth gauge guide to clear out the bar groove
One very important tip you forgot to mention: Before you sharpen the teeth, be sure to tighten the chain to a point that it is tighter than it is when you adjust for cutting. You want to screw the adjuster in and put a bit of torque on the 2 bar nuts, and have the chain tight enough so the teeth dont "roll" as you apply pressure from the file when sharpening. This keeps the teeth flat and ensures a better sharpening angle. Give it a try....I think you will agree. But be sure to immediately loosen the chain when done, as you dont want unnecessary pressure on the little crank bearing under the clutch.
I agree on tightening the chain but just make tight like the manual recommends, then just use the brake on the chainsaw.
@@bccradventures84 I should have said that you only want to have the chain this tight during sharpening only, to help keep the teeth lined up and not "rolling" as you sharpen. After sharpening both rows of teeth, then of course loosen the chain to where there is about 1/8 inch of "droop" on the lower chain (below the bar at about the middle point). And be sure that the nose of the bar has a block of wood under it so the bar is being raised up to its max when making this adjustment. I also always loosen the chain after using so there is not unnecesssary stress on that poor little needle bearing under the sprockett.
I just watch this video as a refresher. It appears i was doing everying right but the loose chain was bugging me with the teeth trying to roll. I figured it might effect the angle sharpened. Thanks for the suggestion!
@@EverybodyLovesMoe Youre welcome Pilgrim. Another tip on using the file: I use my left thumb (wearing gloves) to put a bit of pressure on the file when I sharpen the left side, and only use the upper 1/3 portion of the file when doing the sharpening strokes. On the right side I use the lower 1/3 portion of the file, but cant get my thumb to apply pressure at that angle.....however, since I am using the lower portion of the file, some extra pressure on the file will not break the file. Also a good idea to use a small wire brush and brush "sideways on the file" to remove metal particles from the file teeth before sharpening the saw.....this ensures the file teeth is giving a proper "bite".
@@crazeyspivey This pilgrim says "thank you". The video is excellent as I never did maintenace in the bar. I decided to take the bar off and sure enough there was a grove, albeit small as I haven't done lots with the saw. In cleaning the grove in the bar I noticed it was pintched tight in a few spots. My bar would smoke and get hot and it was getting oil. I like to read comments for this very reason. I also use the bottom 1/3 of the file (stop it from bending) and I use short strokes to minimize bending etc. Seemed to work well, gonna run it very soon. Cheers.
After 4 decades and living and felling trees from AK to AZ, I finally find the most comprehensive, detailed, straight to the point definitive explanations! Can't wait to get my chainsaw out, tear it apart and NOW see what is wrong with it! Thank you Brother! I'm now 'equipped' with the right knowledge!
I've watched 4-5 chain sharpening videos the last two days and this is by far the most comprehensive, AWESOME!
There are a couple of things not covered here.
1) the file only cuts in one direction, and that is when it is moving along from the end to the handle end. You can feel this. As such, don't touch or drag the file against the teeth on the backstroke when sharpening, it doesn't do any sharpening and it dulls the file.
2) almost all full chisel and semi-chisel chains need a slight negative angle on the file at the handle end when sharpening. This is typically -5 to -10 degrees. So the handle of the file should be below the bar as you push in the file and the far end should be above the bar.
Lastly, it is much faster to hold the file only on the handle end and just push the file in and file and sharpen. You can use your free hand to keep the chain steady and in place. The file is plenty stiff to do this. You should also rotate the file some as you use it and knock the filings off the file every couple of teeth as they will fill up the file and reduce your filing efficiency.
Filing by hand should allow you to sharpen your chain 25-50 times by hand when doing it each tank of gas, you can get extremely long life from a chain. I can cut at least 12-15 cords of wood with a single chain as long as I don't hit something. Also, there really isn't any need to clamp the chainsaw, or squeeze it between your legs for filing when you file with one hand, as the other hand can hold the chain and resist the force. Just set it up on something so you aren't bending over all the time.
AND....the size of file to use....wasn't mentioned
File cutting in only one direction was covered on screen @ 3:43. File size was mentioned on screen @ 4:59
The purpose of the vise is mentioned at 6:40 and it makes sense. Holding the chain with your other hand you better wear gloves and sometimes its hard to move the chain with your hand.
Great masterful addition to a Great article!
@@rickplatinum9896 I use 1/32 over what they say to use.
Extra hint for restorative filing: tighten the chain really tight to file, keeps the teeth from rocking around while you file. remember to adjust it again before you cut.
Best description of all the major issues involved with sharpening a chain. Thank you!
Thank you for sharing your time and expertise. I owned chain saws for many decades but never ventured into sharpening the blades. Your instructions are easy to follow, and the quality of the video is great. Thanks again.
I'm glad I found this video. I didn't have many people in my life when I was younger that tolerated me being around them let alone teach me any sort of skills. the overhead view of the sharpening was like having somebody guide my hands from over my shoulder. Makes me wish there were more men like you around when I was little.
Thanks for including Step 3, the bar. One of my saws was basically unusable because of that issue.
I learned more in this one video than in my entire 40 yrs of life as far as chain saw chain maintenance goes. Thank you sir
Ive watched about 6 videos on this subject. And needed a refresher course. This is the best i have watched so far. Very in depth. Thanks!
What a complete and easy to understand instructional video. I understood everything you talked about and I totally understand why it doesn't work, what to look for and how to fix it! Great job man. I feel like I'll be better at it now. Theres a couple of chainsaws with similar issues that I've set aside for a while because I just wasn't aware. Thank you for taking the time to make the video.
Thank you very much! I really needed to know this, wish my grandpa was still around so I could tell him what i just learned.
By far the best chain saw sharpening video. From A to Z everything you need to know, and were afraid to ask.
I have been using chainsaws for many decades yet still learned some valuable points from this video so thank you very much!
I’ve used a chainsaw for 20 years around my home with never a good understanding as to how to properly sharpen the chain. Thank you very much for making a comprehensive and understandable video which will greatly benefit me in my future endeavors.
Best Chain sharpening video I've seen yet!
he is sharping the tooth wrong,the way he is sharping it it leaves a bur on the outside of tooth andit will dull fast, my dad taught me that and he was right .
Nah watch buckin
I used to do that and it would dull faster ,I have experimented both ways and pushing the file outside in toward tooth is best.
@@marianatequiero28
Bucking Billy lmao.
I want to personally say thank you. Your wisdom shared completely triumphs over the other videos I have watch.
The most comprehensive, detailed instruction video I've ever seen on YT about any subject. GREAT! I now have complete confidence in evaluating and sharpening my chainsaws.
This video somehow made me really go want to go and sharpen a chain. And that is no mean feat. I have a chain that's quite sharp and won't cut and now I know it's because I never filed down the height of my rakers. Thanks for solving that mystery. This is the best chainsaw sharpening video I have yet to come across direct clear and to the point.
Eric Peltzer the on,y addition I would add, each tooth should receive the same number of files strokes. In a rare sit where a tooth (or a few) is beat up, maintain the same number of stories with minimal pressure/ effort
@@jackbills9938 Old wives tale. Condition of the teeth vary.
@@ureasmith3049 you’re exactly right, you file each denture till it’s sharp. No set rule on how many times you need to run the file across them.
Your explanation and instruction is head and shoulders above everything else I've seen. Clear, articulate, concise. Thanks!
Thanks, Gavin I soon after read an article as to why you flipped the bar, and I had never realized that it makes sense
Well done. The slow motion chisel cut on each side with cheese was soberly illustrative. Thank you for clearing up my understanding and adding details.
As a total newbie I found this video awesome. Simple, clear instructions and great explanations. Thanks 👍
Great video, when I first learned to sharpen I was taught that every tooth needs the same # of strokes with the file. Years later, I talked to a logger and he filled me in on why this advice was wrong. He said: " if you hit a rock or dirt, there is no way to know how much damage any one individual tooth received, so each tooth is unique, some teeth may have severe nicks and may take 10 to 12 strokes with the file, and some teeth may have no damage at all, and may only take a few strokes". This is expertly demonstrated in the video, his first tooth( starting at 4:27) only took 8 strokes, but the next tooth took 16 strokes as it was very badly nicked, thanks for posting
But I disagree with the length of the teeth, I hand file all my chains, the teeth are different lengths and the chain cuts straight. Keep the bar well maintained and the chain tight and sharp, and you will have fast great cutting saw.
You’re both right. Never could figure out why people would think every tooth needs the same amount of strokes when you can look and see that can’t be right. As with anything it’s practice that gets a person good enough to where they can get the chain sharper than when it was new.
Chainsaw newby here and this is very helpful. Explain the what and the why in an easy to understand manner.
Very good in depth video, went from not knowing a thing about chain maintenance to feeling very confident in identifying problems and fixing them.
Thank you!!! The quiz at the end was awesome, it's so easy to think you have absorbed info in a video until you get to the shop and realize you have no idea. I really appreciate you making me do a knowledge check before I run out to try this 😁
Excellent! I'm a grandpa and I am guilty of always rushing and not taking the time to check details or learn the proper way. Thank you.
We finally got past our rainy season so I am going out to cut some trees. This video is my favorite one to revisit at the beginning of each season. You are a good instructor and your attention to sharing detail is greatly appreciated. Thank you!
Dude, thank you. I've been watching so many videos where everyone jumps to the point with absolutely no explanation. I appreciate the clarity and guidance. I was gifted a sharpening kit for my saw, but it looks like I'll just be using one file from it lol Thanks again!
I had never used a chainsaw before and borrowed a 24" Homelite to cut a tree and found out it wouldnt cut at all. I followed your video to the letter, sharpened all the teeth with the sawblade in the vise, filed some of the risers and then took the blade off and filed the burr and cleaned all the old sawdust. It went through the tree like a hot knife through butter! Excellent video thanks so much!
I'll bet the person you borrowed the saw from used it and wondered wth you did to his/her trusty saw.🤣
I DREAMED I BOGGED THE DONKEY WITH PRINCESS HORSE GEE IT WAS S TREMENDOUS RIDE HORSE WAS A FULL GALLOP😅😅😅
When I first found the video I thought “20 minutes?! This is going to have lots of padding or ads or something”. I’m glad I watched it all. Very informative for a beginner, and your experience and understated enthusiasm really show. Thoughtful production with the close ups too. Thanks so much!
Nice video - For 10 years I cut for a regional power company. We cut and moved - no waiting for the wood to be removed. Two 2-man crews - each crew using 5-gallons of gas per day. We had to file often - wood can be dirty - river bottoms and muddy floods, dust along field sides, etc. You got this correct. Some things I did differently, but they were essentially the same.
I sharpened one side of the chain and then turned the saw around so I could use my right hand to file. I was always concious of getting the top of the tooth sharp - and as you said - keep from putting a hook into the tooth. I always figured the top of the tooth does the most cutting and the side (hook) keeps the channel clean - like the 'set' on a hand saw.
It was good to 'hear' your file 'cut'. As I tell novices - you aren't trying to shine the tooth, you're trying to sharpen it. Too many people keep a file way too long - past it's useful life. And they don't put pressure on the file to cut.
The 'raker' or guide tooth can be filed a little lower if you're cutting softer wood - evergreen, etc. For oak, elm, etc, you don't want the raker too low og the chain will 'catch'.
Yes - learn to file. You can't cut with a dull saw and you can't be running to town to get your chain sharpened or swapping out a chain. I've had to file a chain multiple times to cut river bottom soft maple. Just full of mud.
;
You did a great job and if people learn and follow your instructions, they'll be cutting a lot better and easier.
BRILLIANT video. I recently bought a chainsaw helping me cope with overgrown vegetation on and taking down a few messy trees. on my plot. I had no idea the abuse I was putting my machine through and why I was experiencing certain problems due to my ignorance of proper blade maintenance. This video answered all my questions. Thanks a million.
I just sat through a 20 minute video on sharpening a chain. Rather than thinking, "get this over with", or fast forwarding, I watched and listened intently to all your tips, especially the quiz. Not only was the content good, the quality of the video, closeups, and editing was first rate and you had a flow to whole thing from beginning to end. Great job.
Thank you. I could not wrap my head around all those damn devices for sharpening. I knew it had to be simple.
This is the BEST presentation I've ever seen describing proper tooth sharpening.
New homeowner here with a 3 acre forest. I can’t thank you enough for the depth of advice in this video. I learned heaps and especially how to avoid doing it wrong. I also definitely appreciated the humor in it lol. New subscriber and I will likely return often. Thanks again!!
Thank you for taking the time to create this video. Excellent content! I feel pretty confident about sharpening my chain now.
That is one of the best explanations for taking down the rakers I've heard! Awesome job!
Best video yet on chainsaw sharpening... concise, clear and no nonsense. Thanks for sharing!
Been cutting firewood for personal use for a long time. But I definitely learned from this video. Always got the chain sharp, but too often it would cut at an angle and bind. You helped answer why. That, and the tips regarding the bar itself, most definitely helpful!! I appreciate it very much!!
Great job. You hit all the high points, and the camera work is first rate, really illustrates your thoughts. I first learned to use a chainsaw 60 years ago, USFS, Tahoe, running big old Homelites and McCullochs. And even after all these years, I managed to pick up a couple of pointers.
Back then, we called the doodads rakers, like you. I still do. Lots of youngsters say we gotta call them depth gauges. No we don't.
There are so many comments here, likely nobody will see this, but here goes -- I think maybe you missed a couple of things about guide bar maintenance:
-- I think it's a good idea to do more than remove burrs from the sides, you also need to remove burrs on the bar's edge. They may not be as common as the side burrs, but they can occur, you can actually create them just by filing the burrs on the sides...and they can make the chain run rough across the bumps -- if they're bad, you can actually feel it when cutting. Only takes a second to check for them when you file the sides.
-- Also, I check for burrs on the INSIDE EDGES of the groove, and I regularly dredge out the muck in the groove with a little old screwdriver, sides filed parallel and just small enough to fit in the groove. Mostly the stuff in there is pretty soft, and the drive links will chew it out, but it can get hardened, especially if someone hasn't been cleaning the bar-oil holes or filling the oil reservoir.
I don't mean to criticize. This is the most thorough and practical video I've seen on sharpening a chain. Again, great job.
Hey old timer, Excellent comments, you probably have five years on me with Chainsaws, this CZcams is nice and concise, just the thing for the up and coming Saw Hands. Your comments and his show belong together … thanks for your knowledge …
I'm just learning to how to use a chainsaw and I found the video extremely helpful. I usually scroll through the comments to see what others have to say because most of the time, some viewers who have experience can make helpful suggestions or critiques. Sometimes they have nothing to add and just make rude comments. In this case, not only did you add helpful suggestions, you explained why, and you were very respectful. Thanks for that.
I agree with you. I've found the chain guide, being a piece of sheet metal fits in the groove and really gets the goop out. That shit really puts a drag on the chain. Drag is friction, friction is heat, heat is wasted energy.
As a novice, this is by far the best video on chainsaw sharpening that I've seen, and at last I really understand what all the issues are - thank you! Very well presented too - I just wish you could do videos for all the other subjects that I'm interested in....! :-)
I wonder if he's figured out women.
@@qwerty90615 They are easier than chainsaws, that's for sure.
@@christianriddler5063 Uh huh....sure they are....Id like to introduce you to my wife.
@@darkallyrecordings4931 Make her feel safe and use her own imagination to make her attracted to you. Get this done and the marriage will be fixed.
@@christianriddler5063 Ya lost me at imagination....I was mostly just talking shit but I gotta hear this...explain please kind sir...
This is an excellent video. Clear focused closeups show exactly how to file teeth and rakers. Well explained and very helpful. Many thanks.
Great video. My dad showed me how to sharpen a saw 25yrs ago. But I just learned so much from this video. Thanks!
I appreciate the closeups and clear instructions thank you. My son was in the Scottish forestry for some years and showed me how to sharpen a chain, but I never got it perfect but didn’t use a vice. I will tomorrow lol. Never too old to learn even at 75 years young. Great video!
WOW! I just recently started running a chainsaw. This is definitely the best video on explaining how , why , do’s and don’ts ! Thank You
Hi Kurt :-) You from Illinois too by chance?
@@firemason4837 no sir I am from Ohio. I do have relatives all over the place. Are you a fireman? I have a couple of uncles retired from the fire department
I sure appreciate what a thorough and understandable video you made regarding reconditioning a chainsaw chain. I’ve needed to learn this and I’m thankful I saw your video before I bought a fancy blade sharpener. I’m looking forward to checking my chains and sharpening them. One my brother ran in the dirt multiple times but I know it just needs some attention and will be good as new. Knowledge is power. Thank you so much, again. 😃
I'm glad to finally see a video that shows and explains all the intricate details to sharpening a chain the right way. Good job man! Thank You!
What a fantastic video. I've had numerous issues with my saw, and you addressed all of them! Not only how to recognize the issue, but how to resolve the problems. Excellent! Thank you very much!!!
Probably the best sharpening video I've seen on CZcams. Very practical. Thank you sir!
Out of the many chainsaw videos I have watched, this has been the most simple, informative and easy to watch. Really well explined and I enjoyed the quiz. My chainsaw dealer couldn't explain as well as you have. Thanks, Rob from Australia 🇦🇺
Great material, I particularly liked the study of the rakers' height...I've been sharpening and re-sharpening chainsaw blades many years, and never taken that into consideration. I think this will greatly help me going forward...
Yes, that was the most informative thing in the whole video for me. I haven't seen that discussed anywhere else.
Yea rakers are the most overlooked part of filing. My father taught me to sharpen young. And in my many years of cutting I've learned what does and doesn't work when filing. This is all good info for sure. But yea rakers make the difference because it determines how deep those teeth wanna cut. I Dont think depth Guage is a correct term either. I think depth regulators would make more sense. Or just call em rakers like the rest of the world lol
You are awesome! Incredibly comprehensive. It’s one thing to show someone something but even better to show the ‘why’ it is done that way. The rakers part blew me away. And I never thought about burrs on the bar. Thank you sir!
Very well done. I had started to sharpen my chain and just didn't think I was on track, I then searched and pulled the video up and it reminded me of what I needed to do with all the details. Thanks for taking the time to put this together, share and explain.
Best chain video that I've come across. I don't cut regularly enough to remember these things so your talkthrough is perfect. Thanks.
Having a few issues with my saw cutting correctly, just literally stumbled across this tutorial.
after going on to various sites for information, this is without doubt the best video i have seen.
no longer the dark art its made out to be. well done.
I'm building a cabin from planks that I am milling from logs ... from trees I have cut down. Really great video. Just the basics of keeping the chain clean, sharp and in working order. No fancy equipment. Just the basics, which works great out in the woods. Thanks.
I feel like my resume should say "lumberjack" after watching this. I didn't know shit about sharpening a blade correctly. Awesome video! 😊
I have binge-watched a few of your videos this morning...probably the best I have seen on explaining how to maintain and use a chainsaw! Thanks.
This was an amazing informative video and I feel much more confident in sharpening my own chains. You covered every detail about it and showed many examples! I’ll definitely watch more of your videos! 👍
Finally someone that knows what they are doing. Very good video. Been logging all my life and no one covers it better then you.
Buckin Billy Ray ! Get the Gullet , he’s the man .
@@charlestaylor8566 if you weren’t saying it I was
Logging your whole life then I’d say you’re pretty good at sharpening one as well.
This excellent video is by far the best description of sharpening a chainsaw I have ever seen and has explained perfectly where I have been going wrong. Full marks to content and presenter.
Thanks buddy . That worked a treat , now my pile of old rotting old tree trunks is a tidy fire wood pile ready for the cold season. Love your work.
Some of the best close-ups & explanation anywhere on CZcams! Glad you touched on the oil channel in the bar. Another rookie mistake is sharpening a loose chain. Can't be done!
This is the best instructional video I’ve ever seen. It deserves an award. Great work!
OMG! Best video I have seen for sharpening blades! Very in-depth view of not only sharpening but how the blade works and how the bar can cause issues as well. Job well done!
Thank you for this excellent video. I've been putting off sharpening my chain and pole saw, because I thought it was complicated. You and your cheese made it clear and less intimidating. Perfect!
Wow! This was an incredible presentation. You are an excellent teacher. You made a perfect video.. I'm glad to finally see a video that shows and explains all the intricate details to sharpening a chain the right way. Good job man! This was definitely a well thought out and well produced CZcams video.
This is the best explanation I ever saw. I will be more thoughtful when I sharpen now. Thanks!
Amazing video! I watch a lot of DIY videos and this is by far one of the most comprehensive and well made. Thank you!
This video is better then any of my University lectures. Content, different ways of explaining the same point, comedy to keep you engaged and a friendly quiz to track your knowledge/progress. A+ from a total beginner,
Thanks mate
Consider myself a novice when it comes to chains (5 years) and always questioned if I was sharpening correctly. Turns out I wasn't too far off but I'll take everything from this video and improve no doubt. We'll done and thanks for taking the time man.