I was complaining about the same thing on the scroll wheel button but I was doing it wrong. You need to press it slitghtly lower and it should work just fine. FYI mine is the gen 2 XSR900 but they have the same dash and controls anyway.
I found myself doing powerwheelies a lot easier in power mode 1. Lift control setting influences how fast your bike gets to 45 degree wheelie. I’m happy with lift control mode 1.
@@bosk1n they do too affect your wheelies, if u look down as you start a wheelie your slide control light comes on, it's restricting a bit, I run slide control off and lift #1
I have a '21, obviously same bike. Two biggest complaints are that cheapo toggle wheel (pathetic) and the front blinkers that pop out of socket so easy. One of my first changes I pulled off those junk front blinkers and put some TST MECH GTR on, super bright, look awesome.
I agree on the blinkers, my son also has the new MT07 and the blinkers are the same on that, I had the TST MECH GTR blinkers on my gen 2 MT09 yea super bright and they look cool.
this 1 mod , have an impact at your driving ? you know , 1 mod keep you on kind of train rails ?? ! Cause averybody said how playful is the Tracer 900 and Mt09 ,but when i ride it , i didnt find it playful at all . Now... this conclusion is falty cause the bike was set at mod 1 when i ride it ??????
Other of videos out there. Those on the other hand, are not showing the menu as closely, so try a few videos. Appreciate the power of the internet and free content. I have not paid one cent for this information and I learned about the M mode for traction and lift off settings, so I am grateful for that and so I liked the video. Be grateful. Don't complain. You will be much happier. I promise. Thank the guy. Don't just expect things. Nobody promised you anything, anyway.
Wheelies will F up your bike if you cannot wheelie. Also, wheelies will F up you back and tailbone, or you wrap the whole rig around the nearest tree, if you whisky throttle. Quite honestly, unless you're trying to impress your girlfriend watching you and she won't accept your proposal, UNLESS you wheelie well, then I guess go for it, but otherwise, 09 is enough power to take you for a major ride even with lift off control at 3. I find it THE MOST FUN to open it up and not worry it will run away from me to the neighboring town. Yes, it is modern 900ccs with high compression, too. These bikes are no joke. Not for beginners in drive setting s 1 or 2. Sit on the tank for proper control if you whisky. Have fun. Ride responsibly. keep yourself and others safe so that you can ride again tomorrow.
you must press wheel button more to the down position.. then works fine
I think your button might be dirty inside, I've got an xsr900 and it works flawlessly.
And thanks for the explanations! :)
I was complaining about the same thing on the scroll wheel button but I was doing it wrong. You need to press it slitghtly lower and it should work just fine. FYI mine is the gen 2 XSR900 but they have the same dash and controls anyway.
Hmm I'll have to try that. Thanks for the tip.
Tcs on 1, slide control off and LiF 1, power always on 1! That's the sweet spot whoolies all day long!!!
Good to know. I’ll give that a shot
I found myself doing powerwheelies a lot easier in power mode 1.
Lift control setting influences how fast your bike gets to 45 degree wheelie. I’m happy with lift control mode 1.
As for TSC and SCS - those settings do not affect wheelie in any way afaik.
I’ll have to try that out 👍
Guess this is the case with gen 3 then? With the older gen, I read a lot that you have those turned off. But gen 3 has lift control tho
It might help cause I know sometimes when I do wheelies my traction control light flashes. I’ll try it out and let you know.
@@bosk1n they do too affect your wheelies, if u look down as you start a wheelie your slide control light comes on, it's restricting a bit, I run slide control off and lift #1
Which one is more aggressive?
1. TCS off (from main screen)
2. M mode with (tcs 1, scs off, lif off)
1 will turn off all safety measures so that would be the more aggressive option.
Painful watching you try to select something. Luckily my 2023 sp has a functioning wheel. Great video
I have a '21, obviously same bike. Two biggest complaints are that cheapo toggle wheel (pathetic) and the front blinkers that pop out of socket so easy. One of my first changes I pulled off those junk front blinkers and put some TST MECH GTR on, super bright, look awesome.
I havent got a clear answer maybe you can help but what is the actual differnce between the 2022 and 2021
@@SOCALMOTOBROS BRUH SO THEY CHARGE 100 BUCKS FOR A COLOR DIFFERENCE OMG
@@proxboxlol6367 "inflation" I guess 🤣🤣
when you whant confirmed you must push it down boz in zhe midlle
I agree on the blinkers, my son also has the new MT07 and the blinkers are the same on that, I had the TST MECH GTR blinkers on my gen 2 MT09 yea super bright and they look cool.
The scroll wheel is the worst part on this bike. Thankfully you don’t need to use it much haha
On the tracer i do not have any issues with it
you must press ti lower.. when you go to confirm
The turn signals not shutting themselves off is the worst part of this bike, it's 2022 Yamaha get it together haha
@@ballzmckgee3167 i dont have that problem.. but seat is lose an can move side to side..
Well, can you give me how much the power difference is between 1,2 and 3?
0, only changes the ramp to 100% throttle. Only D-Mode 4 reduces to about 75whp
@@DJSixty Yes, I know. But SoCal's bike is differend than all other MT09's ;)
dynoed values in all modes to see what it was putting to the tire. It was like 50hp in 4 … 80 in 3 … 100 in 2.. 118 in 1
Xsr900 dyno
@@here2enjoy-bt8jq thanks dude! been wondering myself. I wish your comment could be pinned at Yamaha website header
Love the video bro thanks
Thank you 🙏
this 1 mod , have an impact at your driving ? you know , 1 mod keep you on kind of train rails ?? !
Cause averybody said how playful is the Tracer 900 and Mt09 ,but when i ride it , i didnt find it playful at all .
Now... this conclusion is falty cause the bike was set at mod 1 when i ride it ??????
I just bought the same bike ! I'm in love ❤❤❤
You should test the power settings on the street, would be really helpful:)🫶🏾
Other of videos out there. Those on the other hand, are not showing the menu as closely, so try a few videos. Appreciate the power of the internet and free content. I have not paid one cent for this information and I learned about the M mode for traction and lift off settings, so I am grateful for that and so I liked the video. Be grateful. Don't complain. You will be much happier. I promise. Thank the guy. Don't just expect things. Nobody promised you anything, anyway.
How do I actually access the settings menu? I see the menu scroll but how do I select what I want?
You push in the scroll wheel to make a selection
@@SOCALMOTOBROS thank you sir
My pleasure
Thx broski great video
Thank you 🙏
Your video helped me a lot..thank you.
I’m glad to hear that. You’re welcome.
I keep my bike in mode one, havent had it lift once?
What do you have your TCS set to and your power mode set to?
I'm wondering why in d mode three I select TCS 2 and it stays on one that's interesting to me
Hmm not sure. What year do you have?
@@SOCALMOTOBROS 2022
I have a video on my channel where I go through all the settings maybe you can check that out and maybe it will fix the issue.
1 is good
Wheelies will F up your bike if you cannot wheelie. Also, wheelies will F up you back and tailbone, or you wrap the whole rig around the nearest tree, if you whisky throttle. Quite honestly, unless you're trying to impress your girlfriend watching you and she won't accept your proposal, UNLESS you wheelie well, then I guess go for it, but otherwise, 09 is enough power to take you for a major ride even with lift off control at 3. I find it THE MOST FUN to open it up and not worry it will run away from me to the neighboring town. Yes, it is modern 900ccs with high compression, too. These bikes are no joke. Not for beginners in drive setting s 1 or 2. Sit on the tank for proper control if you whisky. Have fun. Ride responsibly. keep yourself and others safe so that you can ride again tomorrow.
So leave tcs on 3
And scs on 3 ?
This is not influencing on the weely?
Yes and move up in power when comfortable.
@@SOCALMOTOBROS many say you should put tcs off tho cuz it works as antiwheelie?
@@ADDONRACER it’s possible but I haven’t had any issues doing wheelies with it on.
What ever happened to knowing how to ride? Why buy a bike like this? Because you do not know how to ride.
You need fuel lol
😂