RadioMaster MT12 Drive Modes (DM) and Global Variables (GV)
Vložit
- čas přidán 8. 09. 2024
- This tutorial video will assist you to set up different rates for your throttle using Global Variables. If you want to change a value across multiple mixes then Global Variables are the way to go. They are a very useful tool within EdgeTX if you need to repeat a value across many mixes. Set up the Global Value and wherever you need the value replace the number with GV1 etc.
We will also go into Drive Modes and their uses particularly relating to GV’s.
Thanks for watching.
Happy Flying.
Ways to help support my channel.
Please consider becoming a patron of my CZcams channel.
/ billclark
By using the affiliate links below I will get a small commission on your purchases but you will pay no more for your order.
General Affiliate Link to RadioMaster:
radiomasterrc....?sca_ref=1531318.eCAoyeniWT
General Affiliate Link to Banggood:
www.banggood.c...
General Affiliate Link to Emax:
emaxmodel.com/...
Can you make a video on curves and throttle speeds setups and maybe throttle output power i am a drag racer and would love to give this radio a shot thank you
Trying to setup S1 and S2 to control steering rate and throttle rate. Setup everything similar to how you and Josh Bardwell demonstrate but it's just not recognizing the signal of the pots. The pots do look to be working as I can see them moving under the channel monitor.
Hi Tony, it sounds like you have not set the mixes up correctly. If you can see the switches working in channel monitor. I would check them.
Thanks! Turned out to be the precision setting so now it works but I only have half of the pots range (to the detent)
@@MrDiMaggio5 go to calibration and set the pot as pots with dent and re calibrate, this should work
Would global variables work for a transbrake option that kills throttle input and throttle ramping and delay for rc drag racing?
You could in conjunction with curves.
@@the-happy-RC-flyer I got it figured out