How to make PCB with Laser cutting machine
Vložit
- čas přidán 6. 06. 2020
- How to make PCB with Laser cutting machine
Laser Machine bit.ly/2XtuwHC
PCB bit.ly/30h2WPr
Contact us
Email: singoeurnsok@gmail.com
FB Page : bit.ly/3pWPlWZ
Support us
www.paypal.com/paypalme/Singo...
Related Videos
1. How to make DC motor at home , homemade electric motor easy
• How to make DC motor a...
2.How to create robotic at home , Homemade small robot 2017
• How to create robotic ...
3.How to make soldering iron using lighter
• How to make soldering ...
4.How to make scrill machine at home using spray can and small motor
• How to make scrill mac...
5.Homemade a small and fast car for kids
• Homemade a small and f...
6.How to make 220V solinoid engine at home
• How to make 220V solin...
7.How to make super transformer at home
• How to make super tran...
8.How to make foam cutter at home
• How to make foam cutte...
9.How to make mini grill stove at home
• How to make a mini gri...
10.Free energy device
• Free energy device new...
11.Boost converter using small NPN transistor and 1.5 V AA battery
• Boost converter using ...
12.Motor as generator 2017, Homemade generator from DC motor
• Motor as generator 201...
13.Motor as generator , Homemade motor generator from old vcd player
• Motor as generator , H...
14.Motor as generator from small motor, Energy of small motor homemade 2017
• Motor as generator fro...
15. How to make scrill machine using 12V DC motor very easy , homemade scrill tool 2017
• How to make scrill mac...
16.V3 Solinoid engine whit 3 7 V, A powerful machine made in 2017
• Video
17.Wireless Electricity Transmission Review made in 2017 , New Project 2017
• Wireless Electricity T...
18.How to make electricity wireless transmittion 2017 step by step
• How to make electricit...
19.How to make Easy motor at home 2017
• How to make Easy motor...
20. Phone charging using small battery
• Phone charging using s...
21.Free energy , from small to a powerful energy, Phone charging using 1 5V AAA small battery
• Free energy , from sma...
22.How to make a powerful air pump at home very very strong
• How to make a powerful...
23.How to make 3V Battery from coopper wire
• How to make 3V Battery...
24.How to make mini Hydrogen Generator at home very easy
• How to make mini Hydro...
25.How to make an Electricity Generator from old HDD motor
• How to make an Electri...
26.How to make a mini flashlight 5W
• How to make a mini fla...
27.Amazing life hack , Easy way to cut roof (Zn panel) using wire
• Video
28.My Electronic lock desk , new idea created in 2017
• My Electronic lock des...
29.Free Energy , Homemade Free Energy Device From Syringe And Water
• Free Energy , Homemad...
30.Free Energy , Free Energy from magnetic, magnet motor 2017
• Free Energy , Free Ene...
31.Free Energy , How to make solar cell from LED, LED Vs Solar cell, homemade 2017
• Free Energy , How to m...
32.Free Energy , solar energy, capacitor charging LED as solar cell
• Free Energy , solar en...
33.Free Energy, Solar Energy, homemade easy solar cell 2017
• Free Energy, Solar Ene...
34.Quad motor helicopter Vs Single motor helicopter, homemade mini helicopters
• Quad motor helicopter ...
35.How to make V2 water pump at home , new model of water pump 2017
• Video
36.How to upgrade 3v DC motor to a high speed and strong motor
• How to upgrade 3v DC m...
37.How to make a mini water pump at home very easy, Homemade 2017
• How to make a mini wat...
38.homemade easy motor from CD panel 2017, a strange motor for 2017
• homemade easy motor fr...
39.ir remote control testing up to 40 meters range, homemade ir remote control without any ic
• ir remote control test...
40.High voletage capacitor, super capacitor , how to charge capacitor
• High voletage capacito...
41.Super motor , homemade easy motor 2017 , new idea to create motor
• Video
42.Free energy, solar copper wire, new idea to create solar cell
• Free energy, solar cop...
43.Very small battery, how to make a small battery at home very easy
• Very small battery, ho...
44.Homemade scrill machine very easy 2017 , a powerful tool
• Homemade drill machin...
45.homemade coilgun , a powerful coilgun 2017 part 1
• homemade coilgun , a p...
46.Homemade coilgun, a powerful coilgun 2017 (part 2)
• Video - Věda a technologie
Tips: Add flood fill to the PCB artwork. It will use much less acid, take less time, and less undercut of traces since those traces are exposed to acid for less time. 🙂 You might find acetone or nail polish removes the paint faster. Also lookup using the zip lock baggie and rubber roller technique which is easy, cleaner (IMO) and uses less acid than a tank. Contemplating buying a laser today, this just looks easy - in such a good way. 😎
yeah, I did your flood fill idea. worked well
Genial la idea!!! Lo pondré en práctica
you can do hole process for component legs ;).. if drill operation can be inside very amazing
Very clear. Thanks very much 🙏
Have you tested the resolution/pitch limit for your process? Good to use it for SOP, SSOP and TQFP footprint?
To get the best resolution (0.03mm or less) you need to use a lens for 100 x 100 mm and focus the hell out of the beam.
You can get down to 0.01mm if everything is perfect.
Cool info, thanks :)
Weird choice of blue paint... Most lasers are blue/violet, so it would reflect since of it. Red, green or black should burn away easier. Nice results, though.
how many watts was your laser? This machine is sold from anything from 5.5w to 40w
Simple, fast, efficient, useful = very good.
My friend, which spray paint did you use? The blue color paint was in purpose or not intentional? Which power level on the laser engraver machine did you use? Full power? 50%?
I prefer to use Matt Black ( not glossy) spray paint which you get in spray cans. Matt black absorbs the laser and gives better results.Also instead of using tooth brush, you can use scotch brite , the results are much better after etching.
is there some sort of tape or film you can use instead of paint?
Мені завжди подобався ведучий каналу. В домашніх умовах спочатку починав з простого, а потім йшов до складного з великим успіхом.
Very impressive. How about smd prints?
What was that blue thing was that normal paint or something else ?
normal paint
Great
The results are great. However, is it not dangerous to laser cut fiberglass PCB? thanks!
#awesome
Impressive, I've been trying it myself with a 50W CO2 laser at 150 mm/s and 15% power, not good results, the paint is either not well burnt or it removes more painting that it should (my minimum line width is 0.6mm). Any tips? I saw you're using 75% power and 400 mm/s, what's the Wattage of your machine?
Also, thanks for sharing. 🙏
#Algorithmen und Universität Workstation ist Güte
Simple + fast + efficient + useful = excellent
nice
👍👍👍
Cooooool
Why didn't you use the laser to make the through holes for the components?
I KNEW IT WILL BE WORKED. NOW YOU SHOW US. NICE!
Do you use the laser cutter for the holes? You didn't show that step.
I don't, my 50W CO2 can burn the copper but also deforms the adjacent area.
I have a 5.5W laser head.
Could I use it here???
When you brush it, why tracks didn't come off too?
Hello friend, thanks for the video, but I have some questions, please:
1) You used the PCB Wizard to draw the tracks, then you saved them as a JPEG; Afterwards, you opened another program to write American Tech; (Was it the PS program, by any chance?) and saved it again as a JPEG? I got a little confused!
2) What settings did you use on the laser, like Power, Speed, etc? (I have a 10W laser).
3) How long did you leave the plaque in the Ferro Perchlorate?
Sorry for so many questions and thank you very much.
Flat black paint better?
the blue color spray, what kind of paint is it?
I belive it is just normal paint. the laser weakens it and it rubs off.
@@justin.campbell Correct, It can be any paint...I remember using a permanent marker to draw tracks in my engineering college days for PCB prototyping. So even laser was not required for wearing off marks. Of course this will work only for large through hole components where pitch and dimensions are not critical.
@@guitarsanmeet yeah its a bit hard to control. Mine keeps washing off in the echant lol.
Way too much commercials, way to less informations. Nothing about the spray paint, etching technology, laser power etc.
Spray paint: any
Etching: standard copper eating etch
Laser power: varies by laser type. But all you are doing is burning a thin layer of paint off...
Spend less time whining and more time thinking about it for 2 seconds.
The woman! Waw!!!
Wonderful! I guess if I use photosensitive/photoresist paint, the printing process could be even faster.
One way to do it faster (but not as clean) : czcams.com/video/wZiBThGrhqs/video.html
Anh là người Việt à 😀😀😀😀
tell please the type of laser and it wattage
which laser is this?
Hola, que pintura es ese spray
What spray to use to tint the plate 1:38
Normal paint or photosensitive?
What is the name of software, please?
##Christian#episode episode Full#vielen dank#So
As an example, I have a QFN-38 package from Analog Devices : LT8705.
QFN-38-1EP-5x7mm-pitch0,5mm. Chip is rectangle and pads are rectangles all around the chip.
0.5mm is the distance betwen 2 pads axes.
Pads width are 0.25 mm width and spaces between each pad is 0.2 mm. So each track should be 0.2 mm width : they should be smaller thant pads.
So : i'm pretty sure your process can't reach that.
With my TwoTree TTS-55 i could not : tracks are breaking during cleaning or etching steps.
The only method that worked is classic printing transparencies and so on but printers give a lot problems if they are not specifics.
So i afforded a laser and scale and linerarity are very good but under 0.35mm i can't expect a track will survive the process.
Some pads do it even at 0.2 mm but there's always more than one breaking then i consider it not a reliable process.
What power setting and speed
for k40 laser
VERY GOOD!!!! THANK YOU!!!
Cuál es el programa que usas para vectorizar 2:11
Beautiful work. What kind of laser do you use? The one in the link no longer works. Thank you.
La vidéo est très bonne .. Je n'obtiens pas ce résultat, je ne peux pas nettoyer le matériau brûlé. De quelle peinture s'agit-il? Acrylique ou synthétique. Il serait très intéressant pour vous de dire la marque et le type de peinture. C'est possible?
Quelle est la puissance de ton laser ? De ce que j'ai vu n'importe quel spray de peinture matte (genre noire) fait l'affaire
What if you coated the entire board in resist and used the laser to burn off the resist then used the normal etching method?
I was doing pads for 0604 SMDs and found that the laser was heating the copper too much so I dropped the power way down and just used multiple passes (10 to 20) to slowly erode the copper away without heating it so much.
Worked great.
Some other tips: Use a lens that gives a 100 x 100mm work size, learn how to focus your laser. I mean get it perfectly focused. Learn how to set the Start TC, End TC and other such settings.
You'll need a powerful microscope to get it right. (google it to get the right procedure. it takes a bit of time to get it right but you'll thank yourself later because your squares will be square and your circles will be round and.. your edges will all connect to each other to form a "watertight" (3D printer jargon) square or circle.
Plus it's pretty cool to see that your lines are just little dots (craters) very, very close to each other.
Laser can't cut through copper?
now make it double sided and plate through the holes. Then dispose of the etchant in an ethical way.
What is blue ink?
Great work. I just made some PCB like that today. I found if you run the laser 2 or 3 times you don't need to scrub the board with the toothbrush. Check my vid if you are interested.
use a higher power laser and you can also go faster.
I find most of the time is prep etc. The laser time is fast.
@@Robonza yes, designing and preparation takes time, but if you need lets say, 20 pieces, quicker lasing would be helpfull
Yeah, good point
Indeed,yours looks better. But you have a CO2 laser. I don't know how good will come out with a 5w real optical power laser diode module from the Chinese friends :)
#Innovation und Universität Edi
Que producto es el spay azul, cual es el nombre ?.
Just regular spray ink from hardware store. Black is better
What software is this?
What was in that liquid tub
ácido férrico
Ferric chloride solution
How many watt is your laser ?
His link in the description only shows 5.5W and 15W so it is one of these...
@@brunocabral1578 15 watts is very excessive and deforms the copper. Você entendeu?
#Network Marketing
Hi, what is the spray that you use?
best regards
Looks like blue paint color to me.
Photosensitive Ink.
Merhaba ustam bu yazıcının yaza bildiği alan ne kadardır. ?x?
#colour
Dofa Pcb exact banne j nahi crop karine banav to
Have you tried vectoring the image instead of rastering it?
#Awards
#compailer
It's not really an how to but simply you doing it, great work tho but just not telling the viewer much
#Matrix
why blue?
I used to work in Alcatel factory in 2001-02 assembling telecom radio transmitter and receivers, biggest regret was not learning intricate details of each parts.
Learning that from you now, so thank you.
Sao lọ ông đang dùng có tiếng việt
Nước rủa móng tay cao cấp:))
#designe Güte pro
wow
MULTUMESC DAR LA ASA,,
MĂ DEPASEȘTE ....👍👍👍👍👍🙏👍👍👍👍🙏
Why didn't tell, what is that liquid
looks like FeCl3+nH2O
Acetone for cleaning, Ferric Chloride for etching.
First view
#quälte soll pro
nice video horrible sound
Hi and thank's you for your video.
Can you reach 0.250 mm tracks width without any damage.
If not we have nothing to tell each other.
Lile no. 7
#Linux
Passbook
Good morning, is it normal paint or UV paint?
wow that cleaning chemical was very "American" looking.
not sure why you wasternarked it Amerian Tech, oh wait. American.
It screams America. thank you for being true Americans. pfft
What a useless video, it contains NO useful information.
nice
nice