Applied Abrasive Blasting Equipment In Action
Vložit
- čas přidán 8. 01. 2010
- www.appliedpi.com - Applied Abrasive Blasting - Applied 40 Litre Blast Pot In Action - Blasting the bonnet of a vintage tractor, a tractor wheel and removing grafitti from a wall - www.appliedpi.com
- Auta a dopravní prostředky
This is an incredible way to remove corrosion and old paint on metal surface. Impressive process of handling metal corrosive surface.
OH YEAH- Very nice setup!
@LEEFABRICATED It probably lasts much longer than the window in a cabinet since you have more room and are able to move around the object and hit it at angles where the abrasive is not coming back at you. My window is good for about 2 hrs in the small cabinet. I get a 1/10 inch at lowes cut to size(3from a $12 sheet) for $4 a sheet and it lasts 10 times longer than peel off sheets and a higher percentage of the time is spent with a clear view.
If you can soak the big ferrous metal parts in a tub of household vinegar for 48 hours prior to sandblasting it. Your work time is reduced by 75%. A lot of the corrosion will just wash off with a garden hose.
how to dock them together if the blaster unit has a EURO size connection?
I figured it would go much quicker. I get about 1/2 that speed, but then I realized that my nozzle is probably the same size as yours. Of course my 60 gal tank is gone in 2 minutes using 30CFM, but I guess that's about right. Is that an 85cf/min compressor?
hey how long does your mask lense last for, or do you use an tear of strip system?
Nice!!! I love this stuff!!
Hi sir can you gets me job possible in sandblasting job
Great tune! Loving deep house =)
I came here to see shot blasting but top marks to who ever selected that tune.
que abrasivo usa? me interesa el sistema
Qual abrasivo usado verde ?
hello friend! how could I get one of those, I'm from Venezuela which is its value?
The compressor should never be anywhere near the blasting . the filters will clog up in minutes and you will get reduced air flow as well as increased compressor wear .
Pull the air filters and put some air through them 😂
This is correct, compressor should be at least 30 feet away, preferably more. Check wind direction and make sure dust doesn't reach the compressor.
That's blast setup looks like a pain in the ass
amazing how well they work when compressor sufficient
Precio, necesito uno.
Necesito comprar un equipo portatil...Donde lo encuentro ??
@waldzioszkapsioszka pierwsze co zauwazylem na tym video to wlasnie to :D o ogladam o piaskowaniu bo szykuje mi sie podobny projekt :D
Not bad for what your working with for equipment
Alot of pro sandblasters use AO or Aluminum Oxide. Its super expensive but it works wonders. The main thing you wana look for is something that etches the metal and doesent peen it. If it peens it the powdercoat will not have a proper surface to hold onto the substrate with and not work well. I hope u bought a really good gun as well as the hobby guns suck.
خروج الهواء ساخن ما المشكل
Takim sprzętem już można się pobawić... Atlas Copco 4,3m3/min, dysza może z 8mm...
Now try running a 6 ton single action running off a ingersol 1600 or a sulair 950 running 3 and a whip on a number 7 nosle you can actually back up off of what you are blasting and be able to control your surface prep a lot better
Hola, me pueden mandar información?
thanks
Nice Machine. Can I use water only and get the same results ?
No
No. water blasting uses high pressure pump not a blasting pot. It should spray water up 40.000 Psi so able to remove rust & old paint
Perhaps there should be some protection for the people in the street as it appears to be just blowing anywhere
I'm thinking since it's blowing everywhere and easy to see that it's blowing everywhere, people can use their common sense and circumvent the temporary inconvenience.
How much does the equipment cost in US dollars?
Thanks Mexico!!
That is about a $9000 USD set up brand new you could find it cheaper but thats ballpark figure ive found double action pots for $300 and a good compressor ingersol 375 for $10,000 then again i got an older sullair 875 sitting at my shop and only paid $6500 for it
What is that small white thing off to the side connected to the other hose?
Thats running air to the mask so a presume its a moisture and oil trap to stop the user from inhaling nasty shit coming from the compressor
, how many psi must be required? for the compressor machine
140 psi constant is sufficient I turn mine up to 150 on a ingersol 375 on my pipeline rig and my tank rig running a sulair 900 with a 6 ton single action and running 3 and a whip I get 140 at the nosle
compressor is off
we found if you have a turntable you can kick the table and hold nozzle wich makes blasting larg diamtere wheels easyrer and half the time
مش عايز حد
This tires is from factory STOMIL OLSZTYN (POLAND)
Hey there i just started my powder coating company, and i also bought a sandblaster just a little bit bigger than the one u have along with a 15 hp compressor, to be honest i dont know what kind of sand should i buy, or at least i would like to know what kinds are in the market, thanks and good luck.
White Silica 14/30, Black Beauty has multiple grades and they truthfully give the best profile.
Музыка ЗАЧЁТНАЯ!!!!
Miło jest oglądać Polskie opony Stomil-Olsztyn
Farmer SKK W Manchester w muzeum autobusów, jest piętrus na Stomilowskich 11.00-20. :D
Хороший пескоструй просто супер....
👍👍👍
Хочу научиться.
what size pot is that?
+New Image Pool And Tile Cleaning 40 liters
Looks like a 300 lb single action gives about 20 to 30 minutes blasting time could be a 600 lb but the compressor he using tells me it isnt
Can I use abrasive blaster without any gear to strip the paint off an antique bike and to clean a rusty motorcycle engine?
I use eye protection, gloves and rain coat when I did my Vmax bike
Not recommended but you CAN
Is it special sand ?
Crushed glass
We blast with glass and have done for the past 10 years rather than j blast.. also we blast with sponge and plastic oh and sand !!
Beginners!
You must of been born with the knowledge of sandblasting hey? Never needed to start at the beginning like us mere peasants.
of course, what do you think !
What are the harmful effects of this machine on human health
Only respiratory problem. Should use adequate protective suit. And not pointing the gun toward some one else. I ve seen blaster accidently got blasted on the chest. Doctor worked so hard to take out sand grain out of his muscle.😥
A TUS ORDENES...
Wait. Why am I watching magic tricks?!! I thought this was about sand blasting!!!
I bet I can make one... lol but it would be not as good.
Ok
Nice demonstration, but why was this being used in a public area without any protection? Sand particles flying out into the street. Complete health and safety violation there. Lots of hazardous substances being thrown out into the air and into the paths of pedestrians.
What should have been done was to erect dust catcher nets at either end to prevent airbourne dusts going into the street, if not limiting it.
dont blast thin metal parts, dont blast graffiti with sand, use soda !! What a mess you are making there.
how about learn how to blast thin metal? And wtf would you use soda to remove graffiti on a concrete wall? Fucking know it alls on youtube crack me up.
STOMIL
too fast.....
what is it with ppl putting anoing music in vids, loss it