✨ MAYTAG DISHWASHER DOESN’T START - SOLVED!!! ✨
Vložit
- čas přidán 20. 03. 2018
- ✨ MAYTAG DISHWASHER DOESN’T START - SOLVED!!! ✨
BUTTONS on TOUCHPAD light up but dishwasher WONT START
HOW TO EASILY REPLACE THE TOUCHPAD
Click here to order a new touchpad: amzn.to/3Z2nHdN
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
▶️-Subscribe Here: / @quickandeasy5minuteap...
🛠-Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @quickandeasy5minuteap...
💻-Website: www.ScottTheFixItGuy.com
📖-Like us on Facebook: / scottthefixitguy
🐥 -Follow us on Twitter: / scottthefixitgy
🌎-Instagram: / scottthefixitguy
-👀See our CZcams Channel: / quickandeasy5minuteapp...
🙏-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
🔌-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY"
Need Extra Help with Your Appliance Today - Click Here:asqme.com/@scottthefixitgu
⚙️-Good Place to Buy Parts: bit.ly/3wD4L5W
🧰-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
- You Can Fix Your Appliance Yourself and Save $$
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 I’d Like To Thank All The Awesome Viewers That Have Supported This Channel By Subscribing or Joining as a Channel Member.
Thank You for Your Very Meaningful Support😊🙏 🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Quick and Easy - 5 Minute Appliance Fixes Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu - Jak na to + styl
Was able to repair mine because of your video. Thanks for the $600 savings
That’s what I love to hear 😊😊😊
We also just replaced the panel on our Maytag using your video and it works again beautifully!!! You saved us having to pay a repairman to do it. THANK YOU!!!! THANK YOU!!!! THANK YOU!!!!
You’re very welcome 👍
Can’t thank you enough for this video!! You saved us over $800! You made it so easy that even though I know almost nothing about appliances and electrical work, I was able to repair our dishwasher! Thank you!!!
Awesome job Lydia😊👍
You saved me from an expensive repair call! Thanks to this video I swapped the control panel out in 15 minutes. Thanks very much!
Awesome, thanks Matt😊
Thank you so much for the instructions and also including the drill bit size needed
It fixed the problem. Thanks a lot!!
This was the best easiest video! I even found out why it went bad. There was no inner cover and no gasket. 🤔 Now I’ll have to find these parts. Thanks for the video it was exactly this easy!!!
Thank you so much! Saved me a ton of time and money. Great walkthrough, very easy to follow. Much appreciated!
Awesome, thank you😊
I installed the part, no problems, dishwasher works great. Could not have done this without your video. Thanks again.
Nicely done😊
To save time and headaches ....check the switch on your counter...that’s what our “problem”was! Someone has flipped the switch! 😂
Lmao I didn’t even watch the video. I went to check your comment and BOOM that was the answer. All this headache and for why
What switch
THANK YOU! I ordered one and replaced my panel and Voila! You made it so easy, plus your video helped me troubleshoot my issue which was exactly what I saw on the one you were repairing!
Thanks so much Kathy😊
Thank you so much! Even though this video is 4 years old, it worked like a charm!
However, inflation and the age of this model means the part price is higher and harder to find. We paid $195. Still cheaper than a new dishwasher and super easy to do for this 45 year old mom. Thanks again!
Glad it helped!😊😊😊
Easy to follow instructions gave me the confidence to do this myself rather than just getting a new dishwasher. Thanks!
Thanks Bryan👍
Thanks for the video. I figured it was the key pad. Nice to see some confirmation.
Thanks Jack👍
Great video! I have the same dishwasher that had the exact same problem. Before I had a chance to see your video, my wife called a "repair man" to look at it. After an $82 visit, his recommendation was to get a new dishwasher. Oh hell no. Before spending hundreds more, I searched online for a possible solution and found your video. I found a new touchpad on ebay for $75. It arrived, I installed it easily thanks to your video, and bam! Dishwasher works like new. Many thanks!
Isn’t that a great feeling?👍
I have the exact same dishwasher and exact same problem. I also just had a repair guy come and he told us the same thing, buy a new dishwasher. We just sold our house and are moving in 2 weeks. I reallllllly don’t want to buy a new one. The link to purchase the part brings me to something different. Any suggestions? Thank you for the easy fix!
I think I found it on eBay 🙏🏼
Great instructions, easy to follow. Got the job done. Thank you!
Excellent , thank you😊
THANK YOU! This absolutely worked like a charm. Who knew such an easy repair would really work.
Thanks Isabela😊❤️
Thanks for your help! Going to try this.
Thanks Michael,
Good luck
Thank you, thank you. Ordered the part from Parts Dr. and my handy husband replaced it. I can hear the dishes being washed right now.
Awesome ,
Thank you
Thanks a lot for the video. Very helpful 👌
I have same problem. Thanks for the video!
You are welcome👍
Thank you very much for the detailed video. One of the key points that stood out for me in this video is, when the patch cable is reattached to the computer panel, the first pin (on our side) should be left open.
You’re very correct👍👍👍
I was able to repair my Maytag due to this video. Thanks
Thanks Rob😊✨
I had the same issue, followed your video, ordered the part and done in less then 10 min.! Thank you!
Thank you for posting this video. I have the same issue and used your video to solve it!
Thanks so much😊
Thanks for the informative video. I just ordered the part from Parts Dr. Wish me luck.
Good luck👍👍👍
Any idea how to buy just a touchpad?? thanks for the great video
Thanks for the video. The control panel is expensive. How do I confirm it is the problem rather than the circuit board.
Mine has a similar issue, but I think it needs a different fix. My buttons work fine, but In my case after each cycle it just doesn't turn on, I press the button, but nothing happens.
But I sort of recognized the behavior from building my own computers, so I went to my electrical panel, I pulled the breaker, walked back in and behold, it worked. Problem is I have to do it every time I need to do a load.
My thinking is that the board is defective in some way, maybe repairable, maybe not, but the hillbilly solution would be to insert a switch on the electrical line (I'll pull the breaker first, no worries) so I don't have to go outside every time I have to wash dishes.
Thank you for giving me an idea of what is behind the panel though. That's always helpful so one doesn't forget to unscrew something and breaks the panel in pieces.
Any ideas of what could be wrong that gets fixed by a reboot?
It could be the heating element is causing the problem because it fires up at the end of the cycle and that’s when it had problems. Maybe a new heating element will help?
I just replaced mine and it works thank you so much
Sorry to be a bother, but you're a fairly recent comment. Any chance you can share where you found the part?
I have a quietseries 100 and ended up buying a new control panel from eBay that is labeled quietseries 300. They look identical. Will that work?
Hi Jessica,
Can you send that question to my email at:
Scottthefixitguy@yahoo.com
Thanks!!
You’re welcome 👍😊
I just looked my part up for my Maytag key pad and it's like 200 to 300 dollars.....it's cheaper me to just get a new dishwasher for that price.....I have the Maytag legacy series quiet series 300....very expensive part
I agree,
You might try unplugging the ribbon cable from the controller and cleaning the end if it with a pencil eraser and then plug it back in to see if it works 👍
@@QuickAndEasy5MinuteAppliance did that and now nothing left lights up.....lol
Hi! I have the exact same dishwasher but I couldn't find the control panel part. Where did you get it? Thanks for the great Video
Did you find one? RepairClinic.com if not might help out.
I have the same dishwasher. In my case the start button flashes 3 times. When it does that I know I have to turn the breaker off/on, then it starts and runs normally. Does this sound like I need a new keyboard? Thanks
Do you happen to have a link? The Amazon one isn’t working. This video is so helpful.
Thanks
You’re welcome😊
Any recommendations on where to order the part from?
I think this one will fit: amzn.to/3Z2nHdN
Hello, is there anywhere that you would recommend getting this part that delivers to Canada...The PartsDr doesn't deliver to Canada unfortunately.
Click here to order a new touchpad: amzn.to/3Z2nHdN
I have the mbd4709awb4 maytag. You have the best video I've watched. I'm pretty convinced its my control panel that needs replacing but still concerned it may be the actual control board. Is there a way to know for sure so I don't waste $$$ on a panel for nothing? Also, I found Parts dr to be the best 👍. Id definitely be buying there.
PS: no buttons light (except for high temp, heat dry, n sanitize) or work. The left side cycle buttons haven't worked for awhile, btw. So to turn it on you had to push start (default ran on 'normal'). Now can't even do that.
I would replace the control panel with the buttons😊
@@QuickAndEasy5MinuteAppliance Thank you so much for your response!
you do a good video thanks
Thanks Mike 👍
Great video, too bad I can't find the part :(
I've got all the buttons lighting up except for the delay, it's just not starting, do you think it's still shorted?
All buttons lit but no action, probably need to replace the touch pad
so i really need to purchase a front board? do you think i could just remove and put back on
You can try, but the cheap bubble buttons are probably damaged.
Can you tell me where the buy the part? Thanks
It looks like my dishwasher is much older than the one shown I would like help with my Maytag model number m Mdb 6000AWA
Hi Mary,
You can email me at:
Scottthefixitguy@yahoo.com
Thank you for these instructions. However, when I look for the Touchpad Panel with the Model # from my dishwasher, there is NOT ONE. Is there possibly somewhere that I can find one?
Can you send your model number and I’ll check😊
@@QuickAndEasy5MinuteAppliance My model # is MDB4709PAW3
I’m confused, this video u show to replace the whole front ( keypad) not the computer.... and I saw another video of yours you replaced the computer not the front panel.... so how do I know what is the Wright part to replace with knowing that the start / cancel are only two not working.. if u have Answr for me that would be highly appreciated...
It’s the keypad👍
I replaced the control panel and none of the buttons light up or work still.
Thanks Nick,
You may have a blown fuse on the controller located behind the control panel.
Hi there, where did u order the keypad?
Hi Cathy,
Here you are:Click here to order a new touchpad: amzn.to/3Z2nHdN
Model number MDC4809AWW0@@QuickAndEasy5MinuteAppliance will that work? My dishwasher is a Maytag and that says whirlpool?
My machine won’t power up, how do I determine if this is my issue?
I would try plugging a lamp into the outlet the dishwasher uses.
It's a little unclear from the video, did you replace the circuit board too?
I have replaced the touch pad twice on mine in 8 years. The failure point is a poorly make ribbon cable on the touch pad. The circuit board did not need replacement on mine.
I have had to replace mine twice in a little over 8 years. The failure point on mine was a poorly made ribbon cable on the touch pad both times. Still cheaper than a new dishwasher.
Thanks. I bought the control panel through Amazon. Now, It works well. Only down point is that it is not easy to find same color panel board with dish washer.
@@johnyoungheankim8241 You're right. I need black and parts dr has a reasonable price but black is out of stock. Other sites have black but at $40-50 more (for any colors). I'll just be a decor trend setter buying white n save that 50 bucks.
this doesnt mention the one simple thing that is often the issues with these, the $8.00 fuse.
Good point,
Always good to check that fuse.
FYI, Maytag no longer carries the touch panel on our dishwasher. Maytag used to be known for continuing to support their appliances for the long term. No more. My refrigerator, same problem. Check out replacement parts webpage. Pick something. There's a whole bunch of something like, "this part is no longer available from our supplier". IE, it's the "supplier's" fault. I did not buy a dishwasher from Maytag's "supplier". I did not buy a refrigerator from Maytag's "supplier". I bought appliances from Maytag. And Maytag is not ensuring availability of replacement parts. Probably not past warranty? No sign this is covid related / temporary. Just too bad for you. It's our "supplier's" fault. Will be buying a dishwasher. NOT a Maytag.
Click here to order a new touchpad: amzn.to/3Z2nHdN
I can’t find this part to save my life
James Ashby www.partsdr.com put your model number in to get right part. 877-800-0828 Best thing I ever did was watch this video. I fixed it first try, correct part but also remember you mat need the inner plastic for the handle. Video exact😀
@@jodenefuentes8363 Thanks for the referral! It's not accurate to search based on the numbers molded into the plastic, so make sure to sure on our site by using the model number from the tag on the dishwasher to locate the correct part. If you need help locating your model number check here: partsdr.com/model-number-locator/dishwasher
@@j.d.777 What is the model number of your dishwasher?