ProPresenter 7 - Setting Up Output Screens
Vložit
- čas přidán 24. 07. 2024
- Follow me on Instagram!: / jheadley1
Peak City Church: www.peakcity.church
My MAIN Camera - amzn.to/2O47AeW
My Lens - amzn.to/2NoIIcy
My Microphone (Yes I got it from Wish) - www.wish.com/product/5444e32d...
Audio Interface - www.sweetwater.com/store/deta...
Music From: Artlist.io
FOLLOW ME:
Instagram: / jheadley1
Twitter: / jheadley1
Facebook: / jheadley1
Website: www.ajheadley.com
These videos are so helpful. I’m struggling though with trying to set up my nameplates. I looked at your last video… but it didn’t go in depth like I was hoping. Is there anyway we can connect and you can possibly walk me through it. It would help me out soooo much
I know how to add screens and lyrics but how do I switch between the slides while the worship group is singing? Thanks for the vid by the way
How are you getting those screens onto the Tv and other eq receiving the show
I have IMAG and a center “lyrics” screen. I show video feed on IMAG and motion graphics/lyrics on center. Am I able to have backgrounds and lyrics on center while still sending only lyrics to IMAG. (We key in our switcher for IMAG).
Yes you can. I’d need to know a bit more about your setup to tell you the steps to take. If you want to shoot me an email from my website, l55av.com, I can help you a little easier.
When I display my audience screen on the screen the display is small in the bottom left corner and it shows the background not just the audience display. How do I make it full screen so that none of the background shows and just the display projected?
The first thing I would check is your screens output in PP7. Go to screens / configure screens and then select the output you are having a problem with. In the bottom right, make sure that Output target is set to full.
how to I setup PP7 so that i can see the program on the laptop screen while having the audience out go to my TV's? right now when I engage the Tv's , I cannot see the program on the laptop, it switches and shows only the output. Thanks
So it sounds like your computer is set to mirror your display. You need to change the computer settings to use the external TV as an extended monitor. Once you do that, then you can send your main audience within propresenter to the TVs and have the regular propresenter screen on the computer.
How do I setup my props to show on my live? When I go to looks I don't see an tab for live. Right now I can add props but it on shows on my audience which am on trying show sermon slides. Help would be great!
Hi Rodnell. I have not used props myself much at all in my setups. I would have to research them some to be able to answer your question. This video may be a good start though. czcams.com/video/D2JfwLj1uo4/video.html
@@JonathanHeadley thanks! Checking out now....I really appreciate you providing us all with this useful information. It really helps to have these tutorials. Blessings
HI we are one month new to PP7 and trying to connect our screens. We have a main LED in the center which will display motion graphics only, 2 TV monitors one on each side of the LED which will have the same motion graphic along with the lyrics and scriptures and finally the stage screen. I am at a lost for getting these setup. Also do I need a special device to split all these screens. All of my ports are being used minus one remaining C drive. We are using a gaming windows. 10 or 11 pc
Hi! Thanks for the question. So first your question about the device to split the screens. I am not sure since I don't know the specs on your PC. Check the specs and see how many output screens it allows. You will need 4 for the scenario you just described. One for each of those monitors and one for the main display monitor at your desk. If your computer doesn't support that many, I recommend this pluggable unit. www.amazon.com/Plugable-Universal-Laptop-Docking-Station-Usb-C-Triple-Monitor/dp/B0779K9DG2/ref=sr_1_4?dib=eyJ2IjoiMSJ9.Pu3mL2Lq_uISw_BYW7tEOAY4LPkEFvUkRJIzMgBj5W0_8mC4Dp8KOarHpFo_VNrn3Gj5HVJE3Kedd0UMCN8HZWc6yW2qiB8A5HwYeTVb2R2j5_qU3CjYc0Jj2xXUA-Nz_Vzk6B5VoRonz5Qa9GMX6EOCyw9JXslR-3DFKyvzeXIEUbDzjPWnGuQdwvHz6OWxigLvtdiSSw2hn6DNZR1QLYRwUvxpQw-owJRulQUxHVY.jn_aKdn3Hnjayr_8yRDAWwnw2VMN5XBhokfx11mgxqQ&dib_tag=se&keywords=pluggable&qid=1712232580&sr=8-4
As for directly setting it up, the short version is you'll work with 3 windows for setup. First, create each monitor output in Screens -> Configure Screens.
Second, setup what goes to each screen in Screens -> Edit Looks. This window can be complex to know what to turn off and on to get the desired effects. Your LED wall you will want to uncheck slide but leave media. For your side screen, leave everything checked.
If you need further help, please hit me up at L55techconsulting@gmail.com and I'd be glad to assist.
Can you help us reset up my pro presenter for my church please.
WHICH DIVISE YOU USE TO CONECT SCREENS? Adaptor, or something like that?
Hi Daniel! At my current church we are using a device from Plugable to send our feed. 3 HDMI outputs that are all separately assignable screens. Just one USB C into our computer. Also has additional USB ports, ethernet, and powers the MacBook. a.co/d/8DGRya0
If I have a big led screen in the middle, Two vertical long led screens 2ft wide x 10ft Height to the right and 2 of the same to the left of the stage if I wanted to display something on each screen do I have to wire each individually so that would be 5 sdi cables running from my computer/pro presenters? What if I have to send something to the lobby, church screens and Facebook live how can I wire all that? That’s 8 outputs please help🙏🏼🙏🏼🙏🏼
Thanks for the question. While I believe this would be doable, it might be too much for ProPresenter to handle consistently. I am assuming there are video signals for imag as well. I think in this type of scenario, it would be better to do this from a video switcher and let propresenter just handle the graphics. Propresenter 7 can do a lot but once you start doing too much, it can get glitchy and inconsistent. Shoot me an email l55techconsulting@gmail.com and we can discuss further.
How’s it going?
Nice one bruh..👍what if Propresenter 7 isn't picking up the Atem pro as a screen. It did before not anymore 😟
Hi! Sorry for the late response. I am sure you have figured this out by this point. If not, let me know and I will answer more promptly.
@@JonathanHeadley I need help with this answer
I have this very same question. @judahkibalama Did you get your answer? if you did could you share with me. I'm running an iMac with Pro7 to an L.E.D wall trying to send lower thirds to Livestream thru Blackmagic TV Studio HD. Please share the info if you received it.
Cool. I've just set-up my propresenter 7 in church for stage and audience display. The problem I'm facing is that my own monitor display has been affected. It's no longer full display and the propresenter app is cut off on the left and right of the my monitor. Any idea on how I can fix that? I don't know if it's a propresenter issue or a system issue.
That sounds like a system issue. Every now and then when you add new monitors, your computer will change the resolution of your main screen. You need to go into the display settings of the computer, find the main display and set it back to default resolution. That would be my suggestion whether you are on a Mac or a PC. Hope that helps.
Merci beaucoup mon frère
What kind of splitter do you need to have to recognize three different outputs from the computer?
What kind of computer are you using? I have a newer MacBook Pro 16 so I am able to run each screen off a separate usbc on the computer itself. But I would recommend getting a matrox unit. A dualheadtogo or a tripleheadtogo depending on your needs. They work great at being able to split one output to multiple. Only a little testy to set up, but once it’s running it works great.
@@JonathanHeadley we are running an iMac from 2017ish. I have one usb c going to a splitter that goes to our two projectors and our livestream. The second usb c goes to our stage display. We are about to upgrade to pro presenter 7 and I’m wanting to run two different displays for in person and livestream displays. Just need to know the best hardware to have to run that.
@@hogforJesus head over to my website, ajheadley.com, shoot me an email and i will send you a gear list in the morning to put that together for you and can give you some tips on setting it up.
Man, I have an issue. Total noob, and our go-to guy is away…
Somehow we got our slide presentation (normally set to audience on the projector screen) showing up in a wonky way right on the desktop screen. It shows up full screen, and in that mode, it also shows up on the projector screen. It obviously stops us from doing anything in Propresenter (like advancing slides) until we close the window, which, when we do, cuts the feed to the projector as well. When that happens, the projector is basically projecting the laptop wallpaper. I haven’t found a tutorial yet that guides me out of that mess.
So it sounds like your computer has been set to mirror rather than extended desktop somehow. What kind of computer do you have and I can try to get you fixed up.
@@JonathanHeadley we have a Dell monitor I believe, but are running one of those Mac mini units.
I really only have a background with sound tech, so this is kind of overwhelming.
how do you use the matrox on your mac? im using an imac 2017 with bigsur on it and cant make the matrox triplehead2go work on it
Hi Gladys. You may need to check with Matrox and make sure the software is compatible with Big Sur. I have not used our Matrox unit since updating to Big Sur because I have enough working outputs on the laptop I have. On a quick search, Big Sur may not be compatible which they need to hurry up and do. Especially since Apple just released Monterey. They need to catch up. So they may have a proper driver they can send you that isn't on their site yet.
@@JonathanHeadley thank you for your answer Jonathan, do you know any other devices like matrox? im looking for another multi display control like matrox
@@gladysaguayo8622 here is a great video that walks through another solution. This is more expensive but also potentially more stable as well as expandable for other needs. czcams.com/video/ud72xaOlngY/video.html
@@JonathanHeadley thank you Jonathan! i appreciate that, God bless you
Pleeeeeease and thank you for any help you can offer.
Maybe by this Sunday (the 14th)??
Here is a link for instructions to change to extended on a mac. support.apple.com/guide/mac-help/use-external-displays-mchl7c7ebe08/mac. And here are directions for a PC. support.microsoft.com/en-us/windows/how-to-use-multiple-monitors-in-windows-329c6962-5a4d-b481-7baa-bec9671f728a
@@JonathanHeadley it’s not set in mirror at all, and do not see an option for extending. Yikes.
@@scratchoriginalsdh shoot me a message on my website and let's start a convo through email and we can see if we can get you fixed up. ajheadley.com
Hey Jonathan, I think they got it figured out yesterday. I am not sure what they did, but when our worship leader/pastor/sound/tech guy comes back in a couple weeks I will do my best to find out. I would like to have some troubleshooting under my belt moving forward.
Ginormous Help. Thanks!
What decimator do you use?
We have a few Decimator MDHX. But we also use an hdmi over cat6 converter for our confidence monitor that was cheap from Amazon and we have a few blackmagic sdi to hdmi converters for a thing or 2 as well.
Are you using a Mac with 3 output display ports? We’re using an iMac with 2 thunderbolt ports and I’m trying to
Figure out how to do this
Yes. I am using a 16” MacBook Pro. We started with an older MacBook Pro that only allowed 2 monitors. To fix that I bought a Matrox Dual Head To Go. This basically sends one output out of your computer but creates a double wide screen that you are able to split in half within propresenter to send different options to each half. The box itself then has 2 outputs on it that correspond to each half of the screen. They also make a triple. There are other external gpu options as well that work similarly, but tend to be more expensive. Here is a link www.bhphotovideo.com/c/product/893261-REG/Matrox_d2g_dp2d_if_DUAL_HEAD2GO_DIGTL_SE.html
@@JonathanHeadley so you are use a dual head 2go to have multiple screen options with PRO7?
@@brandonberry3137 we currently are not using one, but have and will if I decide to add more screen options. They work well to be able to split one display out to multiple out. It’s probably one of the more cost effective options for that scenario.
Where do you get your backgrounds from?
Hi Kay! You can get them from a few places. One of the best is churchmotionsgraphics.com. They make lots of different styles of stuff there.
@@JonathanHeadley 1lqqp
Quick question, is the main screen the screen only the user will see?
When I say main screen, I am referring to the audience screens. So my main screen that the audience will see. Your control screen should stay on the computer monitor you have propresenter set up on.
@@JonathanHeadley Thank you for your reply. The problem we are having is the control screen is showing up on the main screen where everyone can see what we are doing. How do you set up where only the user sees the control screen and the audience only sees the main screen? Thanks
@@jaibnax1577 Gotcha. So if you are seeing that audience screen and also on your computers screen, that means your computer is set to mirror screens. You need to set the audience screen to be and external display. That is a system preferences piece on the computer separate from ProPresenter. Are you on Mac or PC?
@@JonathanHeadley Mac
@@jaibnax1577 So yeah. Start with going to settings -> displays. make sure it is set to stop mirroring and to use extended displays. Then you should be able to set the screen settings in propresenter from there following the instructions in the video.
This didn't help me too much but still God Bless