DIY How to Make a Personalized Concrete Coffee Table
Vložit
- čas přidán 26. 06. 2024
- This coffee table was made for a living area in our basement. Wanted a solid coffee table that the family can enjoy for years to come. To achieve this, we included a design into the cast concrete capturing the hand prints of the entire family. It was another fun project and a learning experience. Hope you enjoy it.
Inspirations/Plans:
- Michael Builds Concrete Table: • How to make a Concrete...
- Michael Builds How to Seal Concrete: • Seal a Concrete Counte...
Materials (Approximately):
- WD40 amzn.to/3fUfrHQ
- Sanded tile Grout amzn.to/3lV4bim
- All Purpose Silicone Sealant Caulk amzn.to/37FPGGx
- Rapid Set Mortar Mix (55lb) www.homedepot.com/p/Rapid-Set...
- Rapid Set Flow Control: www.homedepot.com/p/Rapid-Set...
- FamoWood Glaze Coat Epoxy - amzn.to/2VK11mN
- Polyurethane amzn.to/3lTcPh3
- Construction Adhesive amzn.to/3CHNcWO
- Melamine for Concrete Mold (Dependent on design)
- 2X10 Poplar (Quantity Dependent on design)
Tools:
- X-Acto Knife amzn.to/3AppjBg
- Concrete Mixer Drill attachment: amzn.to/3jIEwqd
- Epoxy Plastic Spreader: amzn.to/2X9iKnW
- Bosch CM8S Miter Saw - amzn.to/3ABmqx5
- Bosch 4100 Table Saw - amzn.to/3yJaVDq
- Bosch Orbital Sander amzn.to/2U9pQI5
- Kreg R3 Pocket Hole Jig amzn.to/2VE4cfn
- Bosch Drill/Driver amzn.to/3COiATw
The above links contains Affiliate Links for which the Channel may get a small commission at no expense to the viewer/buyer.
Music: www.bensound.com - Zábava