Squeezing out extra HP!!! How to Epoxy Stuff Yamaha 701 62t crank cases!!!
Vložit
- čas přidán 10. 09. 2024
- How to stuff Yamaha 701 , 760 cases to make more power!
affiliate link
splash zone epoxy
amzn.to/3DpnJU5
Thanks for watching.
Please subscribe to our channel
/ ericksonsmandp
/ ericksonmap247
ericksonmap@gmail.com
www.iride247.com - Auta a dopravní prostředky
J B weld quick works till 375.
Bike builders use it to smooth out frames, and used for cold side ports, mostly raising the floor.
yes But many times over 275f-300f bonded to aluminum it can separate from the aluminum. its more because the aluminum expands way more then the jb weld does Depends on the parent metal its bonded to.
Thanks for the vids,and sharing the pro tips on porting, can't wait to see what I can do
Que gran trabajo felicidades me encantan estos videos donde explicas todo muchas gracias
Happy to help
What I do on sled drag motors is close the read stop the thickness of the stop fill the intake with epoxy stuff the reed cages to form a mold.then I blend and then remove the read stops.i use the epoxy as the read stops.
We have done that as well over the years what we have found is on drag engines and even snowmobiles That works well but with power sports that are constantly on and off the throttle or coming in-and-out of the water banging off the rev limiter if you do that the reeds just don't last they break very quickly.
Great video again! Do you still use splash zone today for the reed area?
Yes
Do you typically do this kind of work for freestyle or is this beneficial for racing or rec riding as well. I don't race but I do practice running buoys with buddy's who do and I like to jump wakes and run across the lake with my blaster when im not.
Racing and freestyle. It helps in both. Basically just helps make power
@@EricksonMachinePerformance ok awesome. Thanks for the info
I find that with epoxy the worse it smells the better it works don't trust an epoxy that smells good
There is definitely some truth to that!!