40 V Tail Saw Parkside Performance PPSSA 40-Li A1. She finally succeeded..

Join this channel and get access to benefits:
/ @forworkandfun
News Parkside Performance 2022
Parkside Performance cordless impact wrench PDSSAP 20-Li B3 • Malé monštrum 226 Nm. ...
Parkside Performance cordless combined hammer PKHAP 20-Li B2 • Zadymí aj z novej verz...
PARKSIDE PERFORMANCE Cordless angle grinder PWSAP 40-Li A1
PARKSIDE PERFORMANCE Cordless Drill Driver PPBSA 20-Li A1 • Najsilnejšia hobby vŕt...
PARKSIDE PERFORMANCE Cordless tail saw 40 V PPSSA 40-Li A1 • 40 V chvostová píla Pa...
PARKSIDE PERFORMANCE Cordless plunge saw 20 V PPTSA 20-Li • Je podarená alebo nepo...
PARKSIDE PERFORMANCE Cordless tail saw PSSAP 2028 A1
PARKSIDE PERFORMANCE Cordless angle grinder 20 V PWSAP 20 Li D4 • Parkside Performance a...
PARKSIDE PERFORMANCE Cordless Drill Driver PABSP 20 Li C3
PARKSIDE PERFORMANCE Cordless planer PPHA 20-Li B2
PARKSIDE PERFORMANCE Cordless impact wrench 20 V 1/2 PASSP 20-Li A3
Excellent helper Strongbold S1 bit.ly/strongbolds1sk
00:00 Welcome
00:14 Today you will see
00:32 Presentation of the 40V version
01:05 Unpacking
01:32 Organizer in a briefcase
02:02 A preview of machine details
04:07 Comparison model 40V vs B2
04:43 Shaft dimension.
03:21 Size and stroke of the shaft model 2028 vs B2
05:04 Weight 40V vs 2028
05:36 Noise and lift measurement.
06:17 saving option
06:31 Spruce wood cutting + comparison 2028
09:06 Comparison of cutting speed with a 4/4/8Ah battery
09:44 Comparison 2028 vs 40V 180 mm
11:16 Cutting aerated concrete 2028 vs 40V
12:30 Steel cutting
14:38 Final assessment.
#parkside
#performance
#2028
#FORWORKANDFUN
#chvostovapila
#lidl
You can support my channel here. - PAY PAL DONATE
www.paypal.com/donate?hosted_...
Why can you support me ??
The money collected through DONATE will buy another tool for the review. After the review, I will enter the tool into a contest within the channel.
IBAN SK34 0900 0000 0002 2292 0232
Info Facebook
/ forworkandfun

[@pawelodz8050]

Super test. Super channel. Greetings from Poland 👋🏼

[@stefanjarabek5114]

Súper video nejaké ďalšie PARKSIDE

[@Michavico]

I would've liked to have seen Ah next to the voltage in the side by side comparisons. But i've tried to do the math for weight-to-speed ratio:
- As far as I can tell the speed difference is negligible between 2x 8Ah (23,8 seconds - 4,4kg) and 2x 4Ah (26,8 seconds - 3,6kg) compared to its weight (09:30 time stamp):
4,4kg : 3,6kg = 22% weight difference in favour of 2x 4Ah
26,8sec : 23,8sec = 12% speed difference. in favour of 2x 8Ah
- Timestamp 09:00, the single battery unit is using an 8Ah battery (3,3kg), when assuming both are using 8Ah this reveals the following:
4,4kg : 3,3kg = 33% weight difference in favour of 1x 8AH
49sec : 32,3sec = 52% speed difference in favour of 2x 8AH
- This last timestamp doesn't show the 2x 4Ah but considering the first timestamp with the 12% speed decrease would sum this up to be
32,3sec x 12% = 36,2sec
- SUMMARY - This to me seems like the 2x 4Ah is the perfect sweetspot:
3,6kg : 3,3kg = 9% weight difference in favour of 1x 8Ah
49sec : 36,2sec = 35% speed difference in favour of 2x 4Ah
(by 2x I mean 40V, 1x means 20V to clear things up)
I would like to know if the 8Ah and 4Ah can be combined onto one machine (just for the sake incase a battery dies for compatibility)
Although I have criticized this video, it the BEST one i've seen so far! Thank you!!!

[@romank.1085]

U toho průměru hřídele těžko takto soudit, pokud neznáme materíály, ze kterých jsou.
Nemohli použít u 40V lehčí a odolnější slitinu aby redukovali vibrace? Si představ jak by to skákalo, kdyby tam byla 18mm hřídel...

[@DerFledderer]

Finally they got the airflow sorted out.

[@rubikcube6915]

Super video

[@_Barakus_]

Už čakám recenziu s milwaukee chostovou pílou

[@nicochoco03]

Good test !
When the new model of pulvérisateur performance go out ?

[@MilanKaras]

mal by si začať použivat šnúru a závažie. Na porovnavanie rýchlosti rezu tak aby si čo najviac eliminoval rôzny tlak pri pílení.
Zavesíš rovnake závažie za rukoväť píl a bude na nich stále vyvíjaný rovnaký tlak a tým bude porovnanie presnejšie :)

[@hugo-xg3tb]

Hi, is it better than the 20v version ?

[@user-cn3tt4sv3r]

Tak ktorá verzia teraz vyhrala???

[@janberan742]

Jedine Makita JR002G....

[@martinvican8725]

Ako to zvládla prepiliť tehlu? Mám doma z lidlu tu elektrickú a uvažujem o zakúpení plátku na porobeton/tehla.

[@FORWORKANDFUN]

Tehlu som neskúšal. Myslím ze to pôjde len sa tehla môže lámať.

[@jozek621]

Witam
Znowu bardzo dobry test .
Oglądam wszystkie twoje filmy. Widzę że bardzo często korzystasz z tego żółtego stołu. Jak się sprawuje, myślę o zakupie, czy go polecasz.
Życzę sukcesów i pozdrawiam.
Józek

[@koelling]

I removed the security lock immediately after the purchase. It really bothered me and was also very awkward.

[@vaclavjiranek9330]

Myslíš že by si otestoval aku čerpadlo parkside do sudu

[@FORWORKANDFUN]

Mám ho pripravene do recenzie.

[@TheOgi22]

Ahoj.
Dlzka listu je rovnaka, len zdvih je iny?
Teda obe dokazu prerezat rovnako hruby konar?
Len ta 40v to spravi ryychlejsie?
Alebo ta 40v prereza vacsi priemer a dociahne hlbsie?

[@xmeda]

To zpracovani je dost smutne a dost nechutne trepe rukou.
Bylo by fajn pilu jeste na konci testu nedestruktivne rozlozit, aby slo kouknout jak to vypada uvnitr :) A pri rezani tech trubek a jeklu na to caknout trochu kapaliny at se ten platek nevari.

[@Sadr13]

Dvě baterie na takový stroj? To je zvracenost a hovadina. Bud chci používat na menší veci a poridim 20v serii a pokud chci vykon tak radši kabel. Tohle stejně jako 40v flexa mi přijde jako hloupost.