How to remove Peugeot 3008 front wiper motor T8

Welcome,
Today's video will show you how to remove the Peugeot 3008 front wiper motor T8.
First, we will need to remove the wiper arms, remove the little covers for both arms and remove the 16mm nuts. The arms can get stuck spraying some WD40 or other lubricants do the trick. Wriggle the wiper arms off.
Next, remove the seal cover to the front of the cowl trim. Underneath the seal, there is 1 torx screw to the middle that you will need to remove. Pull off the cowl trim gently.
These vehicles have two wiper motors, you don't need to remove both, remove the one that doesn't work. The process on both sides is the same. Remove the two 10mm nuts and slide the motor out. Unplug the motor.
Refitting is following the steps taken in this video in reverse order.
Peugeot 3008 T8,2010-2016 (Applicable models)
I hope you've found this video helpful, don't forget to show your support by subscribing
Enjoy, and best of luck
Carstar
Contact on [e-mail]
Disclaimer
Australia is left-hand drive with the steering wheel on the right, this can sometimes make my videos null or void for Right-hand drive countries with the steering on the left - please keep this in mind.
Before following any car tutorial, please ensure you have the knowledge, skills, and tools to perform the task safely and correctly. Always follow the manufacturer's instructions and guidelines, and if you are unsure about any aspect of the tutorial, seek the advice of a qualified mechanic or automotive technician. Any actions taken based on the information provided in the tutorial are at your own risk, and neither the author nor any affiliated parties can be held responsible for any damage or injury that may occur.