LEAKING BEHIND KOHLER URINAL FIX!

This urinal was leaking from the bottom of the urinal where it connected to the wall. It was clear that there was some thing leaking in between the urinal and where it connected to the drain behind the urinal. I’ll show you how to remove it from the wall and put in a new gasket. This will work on any brand urinal l Kohler, Sloan, Zurn, Duravit, American Standard etc.

[@leifhietala8074]

Dude...gloves. Holy cow, man. GLOVES.

[@francisbergeron4785]

He's never sick

[@johnbrewer7221]

Great video! I had to fix a leaking urinal at the building where my Church meets and this took all the mystery out of it. Everything was exactly as you showed. No surprises. Thanks!

[@thurstoncj1]

Awesome! I'm glad you were able to easily get it resolved.

[@waltysalty]

Thanks, dispatch sent me in blind, and now I got the job done 💪

[@ernestellis2765]

I like this video because it was straight to the point with details. Keep up the good work.....

[@jseverini2497]

Great job ,keep it up .
I have a clogged urinal and had watched 5 "plumbers"
Videos although they might be a licensed plumber they were not good at doing video angle /lighting or commentary on the how to ,and what comes next.
Your video clearly showed how it's hung and remove and replace.
Again great job,,👍

[@thurstoncj1]

Thanks so much! I’m glad it was helpful for your project.

[@anilksingh650]

Great video, straight to the point short video but with all important information, great 👍

[@alanlegg1052]

Razor blade scrapes off caulk pretty good. If I don't have a tool specifically for scraping I use pliers to hold the razor

[@bretthatesgirlsify]

No gloves is WILD

[@usware5240]

Nice simple straight forward video. 10/10

[@MPCfacilities]

Thanks!

[@hashim_iraq]

Very helpful. Thank you sir

[@erichogan9769]

great video. well shot.

[@panashemutero8220]

thanks that was a nice and straight forward video s

[@TheFactsTV80]

Great work

[@petelewis6787]

Straight to the point

[@andrewsworkshop]

You are my hero.

[@astrostv1064]

Thanks

[@rogerdickinson4445]

Very helpful. Next time use a painters 5 in 1 tool ir a razor blade and gloves for the caulk. Screw driver and hammer is a bad idea. Great job though

[@thurstoncj1]

Thanks for the tip! Learning as we go.

[@mattmerkley4602]

No gloves is beast 💪

[@classics289]

Did you put the new gasket on backwards!???!! It sure looked like it was supposed to go the other way.

[@johnmathewson6630]

That’s the right way, but I’m pretty certain the flange is supposed to go inside the pipe

[@classics289]

@@johnmathewson6630 I don't know... I kinda think that's also the reason it wouldn't stay put.

[@BlueCollarMafia]

The channel locks work better the other way but keep going brotha. Everyday is a new way to skin a cat.

[@BlueCollarMafia]

I obviously found your video for reason lol. Not too many residential homes have urinals but I’ve been getting some commercial jobs too and I want to make sure I seen someone else do it first. It’s been years since I’ve took one off the wall.

[@theoevans7771]

👍🏾

[@cpuebla7909]

Heck yeah, just raw dogging them hands 🧤

[@bud11dy]

About how long did it take you to complete this? Not including going to go get the gasket

[@MPCfacilities]

Since this was the first time I’ve done one of these it took me roughly 2 hours learning as I go. If you get all the tools laid out that you need that helps tremendously.

[@bigbadbishop1]

Gloves bro.

[@fightlifenation]

No gloves?

[@MrBcm31]

Did he say caulk…. Gloves gloves

[@user-kf6lq1ku9k]

no he said "cock". big difference.

[@shapst3838]

no gloves... siiiick

[@dennishazel357]

I can send you some gloves

[@danimccarron8413]

I would not eat😁 a sandwich from you😂😉