How to install and operate handheld laser welding machine？

Installing and operating a handheld laser welding machine involves several steps. Keep in mind that specific instructions may vary based on the manufacturer and model of the machine. Here's a general guide:
Installation:
Safety First: Before starting, ensure you have appropriate safety gear, including laser safety glasses.
Power Connection: Connect the machine to a power source following the manufacturer's guidelines.
Cooling System: Set up the cooling system if required. This could involve connecting a water cooling system to prevent the laser from overheating.
Gas Supply: If your machine requires a gas supply (e.g., shielding gas), connect it according to the specifications.
Operation:
Power On: Turn on the laser welding machine following the provided instructions.
Calibration: Calibrate the machine as per the manufacturer's guidelines. This may involve adjusting focus, beam quality, and other parameters.
Material Preparation: Clean and prepare the materials you intend to weld. Ensure they are positioned correctly.
Safety Checks: Double-check all safety features, emergency stops, and interlocks. Ensure the work area is secure.
Test Runs: Conduct test runs on scrap material to fine-tune settings and ensure proper operation.
Welding Technique: Use the appropriate welding technique. Handheld laser welding often involves moving the laser beam over the joint, maintaining a consistent speed and distance.
Quality Control: Inspect the welded joints for quality. Adjust settings as needed for optimal results.
Shutdown: Follow the manufacturer's guidelines for shutting down the machine safely.
Maintenance:
Cleaning: Regularly clean the optics and surrounding areas to maintain optimal performance.
Lubrication: If specified by the manufacturer, apply lubrication to moving parts as needed.
Inspections: Periodically inspect components for wear and tear. Replace any damaged parts promptly.
Software Updates: Keep the machine's software up to date if updates are provided by the manufacturer.