How to Perform Proper Annual Maintenance on Central AC Outdoor Condensing Unit
Vložit
- čas přidán 22. 05. 2024
- Are you an experienced HVAC tech or mechanically inclined homeowner? This step by step how to video is for YOU!
Let's Make The Trades Great Again! Join Mikey Pipes Philanthropy, Inc., an IRS 501(c)(3) non-profit public charitable organization. Our mission is to offer free or low-cost plumbing, heating and cooling services to those in our community who can't afford to hire a professional. Help us here: www.paypal.com/donate/?hosted...
Need a website for your contracting business? Check out Footbridge Media for their amazing special on not only a website but SEO services for only $249/month! www.footbridgemedia.com/?ref=...
Need a CRM or dispatching and invoicing app? Check out HouseCallPro: tinyurl.com/MikeyPipesHCP
What’s in your Veto? Here is mine:
Veto TP-XXL amzn.to/3zX10vg
Testo Combustion Analyzer: amzn.to/3Zd7naH
Digital Manometer: amzn.to/3EDt5ey
Milwaukee M18 Blower: amzn.to/46iTo6j
Milwaukee M12 Fuel 1/4" Impact Driver amzn.to/3I9yLfI
Milwaukee PVC cutter: amzn.to/3sbrdUc
Mini Waterproof Storage bin: amzn.to/3yfgsEv
Wiha Allen Keys: amzn.to/33ipGmb
HIKMICRO B20 amzn.to/33iGklx
Furnace Switch amzn.to/31X89PT
Milwaukee Light amzn.to/3I38Lmh
Wagos amzn.to/34QoiaU
Milwaukee Set amzn.to/33vnQOz
Torpedo Level amzn.to/3no1oOk
Crescent set amzn.to/3GtZeV8
Wiha 7 piece set amzn.to/3rkISaK
Milwaukee step bit amzn.to/3I395Bv
Thermocouple Flare wrench: amzn.to/3noJZ8s
Ridgid 10” wrench amzn.to/3GvRnqa
Fluke non-contact tester amzn.to/31VQgAQ
Klein drivers amzn.to/3qoe21W
Knipex Wrenches amzn.to/3trzFjS
Klein 11-1 amzn.to/3tpsPLD
12” crescent amzn.to/3A0CZ6S
Gerber Gear Pocket Knife amzn.to/3foaW7I
Yellow Jacket Hand Ratchet amzn.to/3nrDgup
I am on Discord & WhatsApp!
Discord: / discord
WhatsApp Group: chat.whatsapp.com/CHZWtZe4KMG...
New oval raised silver stickers are from:
Armored Decal Company Inc.
35 Victoria St. E, Unit 9
Alliston, Ontario L9R 1T3
(p) 705-435-6665
(e) ken@armoreddecal.com
(Tell them Mikey Pipes sent you)
Please support this channel and Mikey Pipes and consider the following…
Pipe Doctor FlexFit Embroidered Caps
Minimum donation of $37 is appreciated
(If you are international - please add a minimum of $40 for shipping/postage)
Shopping on Amazon? Please use my referral link amzn.to/2PjjS4v
Sticker Requests:
Do you want a sticker to show your support of this channel? Email your request to me! mike@mikeypipes.com
Name
Address
City, State, Zip
Consider making a donation of $5.00, or ANY amount, to the postage fund! I literally mail out stickers all over the globe. I've sent stickers to HVAC guys in Afghanistan, New Zealand & all over Europe.
PayPal is: office@pipedoc.net
Venmo: @PipeDoctor
CashApp: $mikeypipesny
Zelle: mike@mikeypipes.com
Want to send a love letter, note or gift? Our mailing address is:
Mikey Pipes, Inc.
1010 Central Avenue
Woodmere, NY 11598
#hvac #mikeypipes #pipedoctor
Music from #InAudio: inaudio.org/
Other music from MOVAVI STUDIO SUITE 2024 under license by 3:10 Global Holding, Inc. - Jak na to + styl
Might be a good idea to mount the Air cooled condenser starter capacitor upside down so that moisture doesn't accumulate in the bath tub top configuration when pointing up if connected wiring is long enough to allow you to reorient pointng down. Noticed the top of the capacitors were very rusty and tested good. Salty air environments rust everything. It's in a sealed compartment but doesn't keep out condensation and bug debris. Just a suggestion when doing maintenance. I really enjoy your channel. NJ Jersey Russ
Good job Mike...... You caught the sloppy work on the disconnect feeder.......
Yup 👍
Great job Mikey pipes
Mr. D You Are A True Professional 👍
So nice of you
So much information in this video really makes it easier to understand the usual difficult part of checking pressures 🙏❤️🔥
Glad it was helpful!
there's always more to it, remember your ABC's! (airflow before charge)
I appreciate this video a lot Mikey! Your making me a better tech, my company is pretty thorough, but man you do a damn good maintenance 🤟🏾👏🏾
Thanks for recommending that meter I bought one in great. I love it even though I don’t you do Service work anymore but it’s great when I have to diagnose something after Install.
Thanks for sharing
excellent vid, thanks mikey!
Thanks!
Good job I love watching your videos
Some important information I have been working for about 15 years for a company that is married to Lennox and we have many problems with the evaporators coils due to the tremendous leaks they cause. I know that all evaporators usually leak liquid but the ones manufactured by Lennox are still of poor quality. I have not repaired the ones they sell made of aluminum, so when they are low on refrigerant, pay attention to the evaporator coils Lennox gives a 10-year warranty on the evaporator and is not responsible for labor or Freon.
With those thermostats and returns so close together they might as well have twinned the systems together as one big system.
This is the best step by step video i have seen on how to perform maintenance to a condenser unit. I hope you are able to do the same thing for the air handler straight cool system, it will be very beneficial. Mikey, does a 10 year warranty covers coil damage due to gulf salt exposure?
You mentioned making observations if your audience could see anything you could do better? I liked your safety approach with how to disconnect power with your left hand behind your back, but by the same token you are wearing a metal bracelet (is not plastic) on your right wrist. This is an osha violation for any person doing some sort of electrical work.
Other than that, you are very professional outspoken individual for the trade.
it is probably not manufacturer warranty, but maybe under home warranty
Because it’s Closer to the ocean. That had me laughing. 😂
Why?
@@gtpforever Not sure must have been the gummies. LOL! I think my mind went that one unit was closer to the ocean and it was falling apart faster.
Great information, Mike, and very clear explanations. Question: Since you had to add a small amount of refrigerant and you suspected a small leak somewhere in the system, would you proactively add some Easy Seal to try and solve the leak? Thanks!
This was very in detail and great for learning. The right tools for the right job makes all the difference in the whole world. What year were those? Luv the STIKA but where’s the FILTA?
El mejor
Me patron
Looks dam thorough to me. Man, those fins were crumbling like a vanilla wafer.😮 so the subcooling happening in the evaporator is the temputure in degrees lower than the saturation point of the refrigerant ? And that basically accounts for the heat load in the house?
#1 Make the trades great again Mikey Pipes. #LoveBosch Smash that Like Button and Subscribe.
👋
Hi Mike, for the faded label do you know about the highlighting the faded area with a maker/pencil or flashing a flashlight over the label tricks so that you can read it? Good video!
Not that I know of, good tip
14:34 that would be ok, "if it was an outdoor sub panel" with four or more breaker spaces, holding two "two pole breakers" one per unit(as the disconnect). the wire appears to be 8-3 or 6-3 with ground. I'm guessing it was right with an outdoor sub panel at one point, then the hacks came along. 😉
How do these coils get mangled? They are so well protected. What affects them, and how can you protect them even better?
Am I wrong in believing that a single pole contactor only breaks 1 line going to the unit, leaving the other line always providing 120 volts ?
no thats correct
That’s correct.
I like testing the caps under load
Do you ever spray anything like corrosion block on the connections in your maintenance?
Every year it surprises me how bad the ocean eats those condensors!
Crazy. Salt. Air. Death. 💀
17:56 you said my testo wireless temperature probes to read my suction discharge pressures 🤣😂
Question - Why don't you use a protective coating to prevent corrosion on those terminals? We do it with car batteries
I bet someone checked the charge at some point after it was installed with the coils plugged up, and it probably showed correct subcool at the time
Which HVAC system do you prefer. Carrier Infinity or Bosch 2.0? Seems that Infinity has a larger remote air-cooled condenser.
Great job. To minimize the amps pull at start up, will it help if you put a starting capacitor to minimize amps pull
Yes it does
@@PipeDoctor Thanks for the reply
you would think they would put them on as part of any solar install.
Here in Seattle, we always put vinyl on the exposed line sets that comes out of line hide but I see no vinyl ever on your stuff in Florida or New York. You should think about getting some vinyl.
Thanks for the tip
Why can’t the factory mount the info sticker on the inside of the contactor cover plate with other decals
There are stickers inside to read the model numbers
👍
Mikey, do you use nylok on the service port caps when you put them back on
No
It is a Lennox so you know its low. Looked like both units were low. Did you charge both?
Had to clean a coil like that I’m outdoor unit because you’re afraid you’ll take some of the aluminum bins away when you clean it but what do you have as an option? Nothing you got to
👍
Wonder if they gold plate the fins if it would help.
I've always added R-410A to a system with the bottle upside down. This is because it's a blended refrigerant and it ensures the two are mixed properly. Am I wrong?
that's the right way to do ALL blended refrigerants, inverted bottle drawn off as liquid. of course you have to throttle it down so it flashes to gas as it enters the system, don't want to feed the compressor liquid! you can do the initial charge with system "off" as straight liquid, generally into the high side only, unless there's a receiver tank, as you still do not want to flood the compressor, possibly pushing oil out or leaving it full of liquid.
single component refrigerants can be charged gas or liquid, since there's nothing to keep blended.
whoops, to be clear, he did "flip the tank over and reset the scale weight" just before adding charge. forgot to say that.
Someone missed the rally in the Bronx
#2 hay Scott v
👋
Scott's Rule.
Has anyone ever worked on a concord? They are supposedly made by Lennox. I had a forced air heating and air concord system for 18 years in my last house. Went through 2 or 3 control boards, capacitors, was not reliable. It never leaked though and it was a R12 unit. The people that bought the house installed a carrier 😂
Trane or Carrier?
Anybody know what those large gray units with the heavy duty round switch -- above the horiz elec duct on the wall are ?
Time stamp please?
@@PipeDoctor 24:20....solar equip ?
Lennox crap worst system ever, been a nightmare for 15 years. Leaks and coils get dirty so quickly. Bosch or Split system next time.
Yup 👍
When you're that close to the ocean, does rinsing the coil once a week help at all or will it still corrode regardless
Last company I worked for w a s Lennox dealer and I would do multiple coils a week
Mo s t 1 or 2 years old
Hey Mike what happened to that guy you had workin for you Tove?
He moved on
@@PipeDoctor Weird he was ok thanks mike
@@PipeDoctor Did he move on in a good way? Reason I ask is cos of all the shit heads we get lol
Got a complaint at the end of an annual ac service. Guy said he only paid 45 dollars for the last one and my price was way too high. Mind boggling to see handymen wiping off the outside of a condenser and calling it an “ac clean and check” it’s just sad.
so dude makes 200 dollars a day at best waxing condensers...chump change
Wouldn't it be great if manufacturers designed there equipment so it would easier to work on!!!!!!!!!!!!!!
Lennox is the absolute worst residential unit's period. I absolutely hate them I would actually prefer Goodman over Lennox.
I used to work for a Lennox premier dealer, and yes Lennox is just goodman with a business suit and a haircut at best
Shut-Off Breaker is Absolutely Ridiculous. How do Hacks stay in Business ? It’s quite Obvious the Hack that Installed this Danger Condition doesn’t Live here. 🤪👎
You put 2 pounds? Dude leak.
First of all Why is everyone speeding.?!... slow down.!.. and youre deiving too close
It’s a NY thing