AI monitor with left,right,rearview side BSD camera.DVS QOHO

AI Monitor with 3 BSD Camera
0:05 Introducing the AI Monitor with 3 BSD System, the next level in vehicle safety technology. Equipped with not one, not two, but three cameras - rear, left, and right - this system revolutionizes the way you navigate the road.
0:20 The AI Monitor's three-camera setup continuously scans for blind spots, ensuring that you are never caught off guard while driving. It works tirelessly to make your journey safer and more secure.
0:31 The AI algorithms analyze the camera feeds in real-time. They detect vehicles, pedestrians, or obstacles that may be in your blind spots.
0:41 And when the AI identifies potential danger, it immediately alerts you with both audio and visual cues.
0:47 In this part, we will show you how to connect and operate the system.
Installation Video:
0:51 Step one: Check the accessories. Power cord, sound and light alarm, 3 cameras and display host.
First thing is to plug the power cord into the jack of the host, and then plug the sound and light alarm into the jack of the other line of the host.
1:24 On the other end of the power cord, channel 1 can be connected to an ordinary camera, and then channel Connect extension cords 2, 3, and 4. After connecting the extension cords, connect a camera to the other end of each of the three extension cords.
2:07 Then check if the voltage of the power supply: 12V-36V. After confirming, turn off the power supply first;
Then first connect the 12V-36V and ACC (connect the positive pole) and GND wires (connect the negative pole) of the power supply.
2:40 Then connect the GND of the sound and light alarm to the negative electrode, and connect the ACC to the positive electrode.
3:10 Then turn on the power, and then connect channel 2 on the power cord to the high frequency of the power supply, which can trigger channel 2 (rear view camera) to zoom in and display the reversing line to assist in reversing. After channel 3 is exposed to the high frequency, you can zoom in on channel 3.
3:56 Use the left side AI BSD camera performs pedestrian detection on the left side. After channel 4 is exposed to high electric frequency, channel 4 can be enlarged to use the right AI BSD camera for right pedestrian detection.
4:13 When it detects that a pedestrian is too close, the audible and visual alarm will sound an alarm, and the alarm will be released when the pedestrian leaves.

[@QOHO]

AI monitor with left,right,rearview side BSD camera.DVS system