How tough is the smallest car in the game? Enjoy! #beamngdrive #tractorpulling #forgottenmustard #beamng #heavyhaulage #horsepower #smallengine #smallcar #experiment #slow
You could put in the customisable diff and race gearbox to get the lowest ratios possible for towing, along with tuning the 1.0 engine and it will pull much more i think.
Pulling heavy stuff is all about gear ratio. That's why you see videos with trucks pulling 1000 containers. It's impressive yes, but doesn't prove anything.
You could have added more reduction with the race gearbox and race final drive. Or you could have inflated the dolly and trailer tires to like double the psi to lower the rolling resistance. With these combined I am sure you could pull at least 120 tonnes
А какой в этом смысл? Стронуть с места 120 тонн и всё? Нужно делать так, чтобы автомобиль мог ехать по дорогам общего пользования с их спусками, подъёмами и неровностями. А подобные испытания начал первым делать я ещё года 2 назад. czcams.com/video/fH-gyKG73HQ/video.htmlsi=pQfQribILq-CfW7d Похоже он просто подсмотрел мою идею
2.5hp at max. We're talking abt some Eddie hall type of shit. Besides with the right gear ratio, you can pull anything. Of course the ratio has to be insane but theoretically you can do it.
on level tarmac innormal shoes with coefficient of friction 1 max what human can generated wothout jerk is 100% maybe lil more body weight force so assuming 100 kg human you have 100 kg force roll for tire on tarmac avg is like 0,02 so 9,81 x100 :0,02 = 5 tons max around in such test condition assuming person use jerk technique it can pull more 😉👌🏻 value change depend od roll friction under shoes weight of pulling person 👌🏻😉 can be from 2 ton let say to 10 tons with jerk and or with hole in ground for grip „much more 👌🏻 for push avg 1 ton car on level tarmac with normal tire pressure 15-20 kg force is required even kid can do this 😉👌🏻 just offcorse beacuse force be very small accelerstion be very small so car will change position very slooooooowwwwww and person need to push very long for achive specified distance 😉
The answer is simple - an "infinite" amount of weight, if you get proper parameters. In any case, towing the Saturn V rocket would be no problem with a proper vehicle using a 1-litre engine. Obviously, the SPEED would be extremely low with such incredible gearing etc. But as long as you don't mind the low speed, anything is possible.
@@Riskw-mk1lo In any case, a 1-litre engine can pull thousands of tons, if geared properly. And of course the vehicle has to be heavy enough to get traction.
Hi Mr forgotten mustard in the next video I would like to see how long the car will drive with no oil and no radiator to see if the engine will expload or lock up if it can be done use the hill climb map to make the engine overheat thanks for the cool videos keep up the good work and happy New year
I'm not gonna lie, that little air cooled F4 is super super durable. If you don't push it THAT hard, it can survive anything, thanks to no liquid coolant, which would've already blew the coolant pipes and radiator
Any car can pull any weight on a level road. If no components break. But even 1 PS (lets use a safety factor of 2 and make it 2 PS) can move 100 tons. The scary part is how to stop 100 tons with your beetle.
I guess there is no such thing as mechanical friction in beaming, you can pull anything with whatever small engine. It just need some time to reach a sensible speed
in theory, if the attatchment point was higher (like the roof) then the act of pulling would apply downward force and aid in traction. ...not that traction was the main issue here, but still
What mod or how did you make the dolly compatible with the car because I would like to be able hitch the dolly to the D-series or other cars. Thank you!
Oh so im not the only person that couldnt attach the dolly to the d series, i wanted to experiment a bit with towing but i couldnt do it, and i dont understand how to attach trailers together like in the video
And then people are wondering how tiny narrow gauge locomotives can still haul freight of many, many times their own weight (And this is a car, which is WAY lighter and weaker)
This is not applicable to real life :D - burnt clutch, broken axle shaft, engine stall, engine overheat, a real car like this wouldn't be able to spin wheels, lets say it is gr corolla and the car is super overbuilt - then again this stress would cause major overheat of the weakest links and even a miracle happens and this can is still alive - this would cause serious wear to the car like it is 40 years of age old and worn.
Well, there's a detail you're missing with that comment: trucks rev lower so to compensate amd be able to reach higher speeds they have longer ratios, you'd need something like a F1 gearbox to get the desired result, and final drive ratio (the ratio output of the differential) affects more anyways.
The smell of burnt clutch must be insane
At that point it's not burnt clutch smell it's just burnt smell
Being inside must've smelled like wildfire
Ah, the smell of burnt broccoli in the morning
the poor clutch is screaming for help
If the clutch is screaming for help, then what else could the engine do? 🤣
Ah yes the good old 1000 degree clutch
@@joarnold9495 5000*
I’m actually surprised that the first half of the video didn’t have the clutch catching on fire
@@zat-1-furyor the damn thing just snapping in half
You could put in the customisable diff and race gearbox to get the lowest ratios possible for towing, along with tuning the 1.0 engine and it will pull much more i think.
yup it's definitely gonna pull more weight
Just a different carb could make a big difference (performance block could lower low end torque)
Pulling heavy stuff is all about gear ratio. That's why you see videos with trucks pulling 1000 containers. It's impressive yes, but doesn't prove anything.
No, tyres wont traction.
I think they will@@NoName-md5zb
As soon as I heard the squealing for just the dolly, I knew it would be rough
nah the spinning wheels is caused by the immense numbers of torque, my 5.9 cummins mod will spin the wheels without anything on it 🤣🤣
@@ViktorG24yeah, the immense torque the 1.0 engine has....
@@ViktorG24but this isn’t a 5.9 cummins…
The wheels spinning is caused by the lack of grip
Negative iq comment
I just wanna be half as tough as the clutch in that little car 😅
You're on a path to madness and self destruction, don't do that XD
You could have added more reduction with the race gearbox and race final drive. Or you could have inflated the dolly and trailer tires to like double the psi to lower the rolling resistance. With these combined I am sure you could pull at least 120 tonnes
А какой в этом смысл? Стронуть с места 120 тонн и всё? Нужно делать так, чтобы автомобиль мог ехать по дорогам общего пользования с их спусками, подъёмами и неровностями.
А подобные испытания начал первым делать я ещё года 2 назад. czcams.com/video/fH-gyKG73HQ/video.htmlsi=pQfQribILq-CfW7d Похоже он просто подсмотрел мою идею
Fun fact somehow the stock wydra can pull 15 tons no problem but if you tune it to its max you can really get it going
If that car had a lower gear it would have been able to pull 80 tons without destruction, but it would be really slow.
humans can have 2.5hp(12x less than 30), can they pull 6.7tonnes?
I mean there are videos of strongmen pulling planes and trains so... Yeah much more than 6.7 tonnes
2.5hp at max. We're talking abt some Eddie hall type of shit. Besides with the right gear ratio, you can pull anything. Of course the ratio has to be insane but theoretically you can do it.
on level tarmac innormal shoes with coefficient of friction 1 max what human can generated wothout jerk is 100% maybe lil more body weight force so assuming 100 kg human you have 100 kg force roll for tire on tarmac avg is like 0,02 so 9,81 x100 :0,02 = 5 tons max around in such test condition assuming person use jerk technique it can pull more 😉👌🏻 value change depend od roll friction under shoes weight of pulling person 👌🏻😉 can be from 2 ton let say to 10 tons with jerk and or with hole in ground for grip „much more 👌🏻 for push avg 1 ton car on level tarmac with normal tire pressure 15-20 kg force is required even kid can do this 😉👌🏻 just offcorse beacuse force be very small accelerstion be very small so car will change position very slooooooowwwwww and person need to push very long for achive specified distance 😉
WOAH WOAH WOAH! slow down there pal. Were all lost here.@@mociczyczki
With the correct gear ratio we can
Imagine just seeing this little guy pass you on the highway with 4 trailers lol
With the maximum speed achievable i'm assuming you're on the highway with a pogo stick or something XD
By the time he accelerates to a good speed and enters the highway i'm gonna get the highest degree, get a job, grow a family and meet my grandchildren
The answer is simple - an "infinite" amount of weight, if you get proper parameters. In any case, towing the Saturn V rocket would be no problem with a proper vehicle using a 1-litre engine. Obviously, the SPEED would be extremely low with such incredible gearing etc. But as long as you don't mind the low speed, anything is possible.
but at some certain points, the physics doesn't allow it.
@@Riskw-mk1lo In any case, a 1-litre engine can pull thousands of tons, if geared properly. And of course the vehicle has to be heavy enough to get traction.
You just have to gear it very very low, and you can tow anything. But it will take some time.
Its all about engine horsepower and wheel torque.
I would have loved to see the clutch temp
Probably just a bit cooler than the surface of the Sun!🤣
@@danw1955 About one or two degrees, yeah 😂
converted the clutch into a torque converter lmao
Jeremy: C’MON, POWER!
I could hear the poor clutch screaming for its life
Trust me, that clutch is not converting anything no more XD
rip to the clutch
with the right gear ratio everything is possible
Hi Mr forgotten mustard in the next video I would like to see how long the car will drive with no oil and no radiator to see if the engine will expload or lock up if it can be done use the hill climb map to make the engine overheat thanks for the cool videos keep up the good work and happy New year
I'm not gonna lie, that little air cooled F4 is super super durable. If you don't push it THAT hard, it can survive anything, thanks to no liquid coolant, which would've already blew the coolant pipes and radiator
The strongest pickle in any car game
Me in the new career mode trying to get the biggest delivery for the smallest price of parts
I think I can I think I can I think I can
La piccola Piccolina che poteva
This are the kind of Beam NG test I'll love to see , not all about crashing
The trailer dolly dwarfing the Piccolina is funny as hell
Reminds me of that one old video of a Fiat 126 pulling a small semi trailer
How did you attached dolly to a car ? I've tried it but dolly only works with truck ball
I wanna hear it too. Was very disappointed when found out that you can't even attach dolly to Stambecco's tow hook.
Node grabber.
@@iowawalker yes idk how to do
@@SexyEarHair really ? it is not very stable
The picolina can truly do anything
Any car can pull any weight on a level road. If no components break. But even 1 PS (lets use a safety factor of 2 and make it 2 PS) can move 100 tons. The scary part is how to stop 100 tons with your beetle.
Little tic tac that could
Didn't expect that
2 new test ideas:
1. Do the same in the video but uphill
2. do the same in the video but downhill but insteed of pulling, try to hold it like braking
Bro, the first one that Dolly is even bigger than the car itself 😂
ya know the clutch really did come in clutch there at the end
I guess this is how US people look at europeans
Don't let them find out you can tow at least 1,5 t with an average car 🤫
Imagine going down the road, minding your own business when a small picolina shows up carring a 80 ton trailer 💀
all you have to do is playing a damn eurobeat CJ
I love these videos...
0.1 degrees ramp, and it's over! Haha
Depends on how HP and gearing... and traction.
That clutch hates you at this point.
volvo been real quiet since this dropped
if cars would be that tough today… only a dream
The driver would probably give up and leave the fumes before the clutch or engine give way.
The more I listen to the car the more I realize they used a mower for the sound
you should do stopping tests with the trailers aswell
Reminds me of those videos with polski fiat 126p's pulling huge farm trailers
I am pretty sure this won't work in real life due to clutch failure.
also in real life cars like these are not heavy duty - they are designed for lighter task - this would total the car
Someone help that poor Piccolina 😭
Ittle car:😎 😎 💪 💪 💪 💪
Big truck:😮😮😮
I guess there is no such thing as mechanical friction in beaming, you can pull anything with whatever small engine. It just need some time to reach a sensible speed
How do you get the live info guage on the right with the wheel torque. That’s the coolest guage I’ve seen yet
No way ,btw how did u conect the dolly to a car?
Node grabber
I hope they make a mod to do this, I was super disappointed when I found out I couldnt put a pintle hitch on a truck
if i use the node grabber, the dolly's wheels are stuck and refuse to spin@@ForgottenMustard
in theory, if the attatchment point was higher (like the roof) then the act of pulling would apply downward force and aid in traction.
...not that traction was the main issue here, but still
This is exactly what I was thinking. A gooseneck attachment on its roof would look pretty interesting too!
Add AWD and front drag tires too
i see you have automatic clutch on :D
SPeed.. no problem.. Stopping? EHH
What a Beast
Oh that clutch is hurting :(
What mod or how did you make the dolly compatible with the car because I would like to be able hitch the dolly to the D-series or other cars. Thank you!
Oh so im not the only person that couldnt attach the dolly to the d series, i wanted to experiment a bit with towing but i couldnt do it, and i dont understand how to attach trailers together like in the video
it’s in the new update, it’s not a mod
Use the node grabber.
Now do it with a diesel engine that makes torque at low RPM.
Don't you just love the sound of your dads lawnmower in your own car😃...
And then people are wondering how tiny narrow gauge locomotives can still haul freight of many, many times their own weight
(And this is a car, which is WAY lighter and weaker)
Maybe a scientist can confirm but will the upwards pull off the drawbar reduce traction?
nobody :
Roman people at german autobahn ...
:D
Crankcase hotter than the sun
Should have left the regular wheels on it, it needed the wheelspin. You just needed to rev out 1st gear more
this car is reliable
Does this use the Engine Simulator thing, is that a thing in BeamNG now?
That clutch is stronger then the engine
This is all good, of course, but how the clutch holds such loads is unclear.
The clutch would have died!
If you put the video into 2x speed the piccolina sounds like a 2 stroke lol
Piccolina POWAAAAAAAAA
How did you attach the trailer dolly? It has a strange type of tow hook
I am surprised
i can smell clutch through the screen
Have you tried 6:1 race final drive and 5:1 first gear?
Thanks
Plug in liter bike numbers. 200hp and 80tq.
This is not applicable to real life :D - burnt clutch, broken axle shaft, engine stall, engine overheat, a real car like this wouldn't be able to spin wheels, lets say it is gr corolla and the car is super overbuilt - then again this stress would cause major overheat of the weakest links and even a miracle happens and this can is still alive - this would cause serious wear to the car like it is 40 years of age old and worn.
Is there a place to learn how to do stuff like this? I’ve only played the game a little bit.
I can smell the Clutch
Is there anywhere where we can download the mods you make or do you even publish them?
Its a question of gearing traction and how slow you're willing to go
How did you hook a semi trailer to a car? Are you using mods? If so can you tell me which mod? Thanks.
No mods, just use node grabber
My Aunt is not going to like it she’ll be jealous!
do you need a mod for more than trailer if yes which one
I can smell the clutch
a video i can smell xD
Каким образом был зацеплен грузовой прицеп за легковое сцепное устройство? У меня не получалось.
Little guy is screaming for help
How did he couple dolly to car?
Is clutch wear simulated in this sim?
Huh so this thing could pull a Challenger 2 TES(~70 tons) on a trailer
how do you attach the dolly to the tow hitch I tryed and can’t get it to work
I used the node grabber.
Clutch go bye bye
irl is impossilbe to pull even 10 ton
What happens if you change the gear ratio to the size of a truck? would that help
Well, there's a detail you're missing with that comment: trucks rev lower so to compensate amd be able to reach higher speeds they have longer ratios, you'd need something like a F1 gearbox to get the desired result, and final drive ratio (the ratio output of the differential) affects more anyways.
how did you hook it up