4 Crossfader Settings for Scratching
Vložit
- čas přidán 13. 07. 2024
- I often get asked, "what are your settings for scratching?" In this video, I breakdown all the possible settings for your cuts starting with the most important one!
Earlier this year, Native Instruments released their HID-mode support for the CDJ-3000s. A recent improvement was applied to the latest update. This update applies to both the CDJ-3000 and the XDJ-1000MK2!
Check out Cleveland Terry at / clevelandterry
---------------------------- PRODUCT LINKS -------------------------------
FEATURED
Pioneer DJ DJM-S11 professional battle mixer
www.zzounds.com/a--3970758/it...
Pioneer DJ DJM-750MK2 professional DJ mixer
www.zzounds.com/a--3970758/it...
Pioneer DJ PLX-1000 professional DJ turntable
www.zzounds.com/a--3970758/it...
Pioneer DJ DJM-V10 6-channel professional DJ mixer
www.zzounds.com/a--3970758/it...
Pioneer DJ CDJ-3000 professional DJ multiplayer
www.zzounds.com/a--3970758/it...
MENTIONED
CAIG DeoxIT Fader Lubricant
amzn.to/3t3KeJH
Pioneer DJ DJM-S7 professional battle mixer
www.zzounds.com/a--3970758/it...
Pioneer DJ DJM-900NXS2 professional DJ mixer
www.zzounds.com/a--3970758/it...
Pioneer DJ DDJ-SB3 DJ controller
www.zzounds.com/a--3970758/it...
Pioneer DJ DDJ-400 DJ controller
www.zzounds.com/a--3970758/it...
CAMERA/AUDIO/LIGHTING used to produce this video:
Zoom H8 multitrack portable recorder (dialog) www.zzounds.com/a--3970758/it...
Sony ZV-1 Vlogger Camera (front) amzn.to/32jLc9l
Sony HandyCam FDR-AX100 (overhead) amzn.to/3rEiWXN
MOVO LP4 omni-directional lav microphone amzn.to/3HGsXuM
Weelyte RGB wifi camera light (backlight) amzn.to/3Fwn8yd
NEEWER 660 LED panel pair amzn.to/3nzcyAq
NEEWER softbox diffuser amzn.to/3DyyHEI
K&F camera stand amzn.to/3DBCwc2
------------------------------ SPONSOR LINK ------------------------------
Direct Music Service www.directmusicservice.com 30% off first month, use promo code PJMONTHLY 10% off first year, use promo code PJYEARLY
------------------------------- DISCLOSURE ----------------------------------
The product links below are from my affiliate partner, zZounds. I earn a small commission if you click on the link and purchase an item. You have no obligation to do so however it does help me fund content like this video which I hope brings valuable information to you!
I am also an official product demonstrator for Pioneer DJ. However, this video is not produced in collaboration or partnership with Pioneer DJ. - Hudba
Featured product links:
Pioneer DJ DJM-S11 professional battle mixer
www.zzounds.com/a--3970758/item--PIODJMS11
Pioneer DJ DJM-750MK2 professional DJ mixer
www.zzounds.com/a--3970758/item--PIODJM750MK2
Pioneer DJ PLX-1000 professional DJ turntable
www.zzounds.com/a--3970758/item--PNRPLX1000
Pioneer DJ DJM-V10 6-channel professional DJ mixer
www.zzounds.com/a--3970758/item--PIODJMV10
Pioneer DJ CDJ-3000 professional DJ multiplayer
www.zzounds.com/a--3970758/item--PIOCDJ3000
Mentioned product links:
CAIG DeoxIT Fader Lubricant
amzn.to/3t3KeJH
Pioneer DJ DJM-S7 professional battle mixer
www.zzounds.com/a--3970758/item--PIODJMS7
Pioneer DJ DJM-900NXS2 professional DJ mixer
www.zzounds.com/a--3970758/item--PNRDJM900NXS2
Pioneer DJ DDJ-SB3 DJ controller
www.zzounds.com/a--3970758/item--PIODDJSB3
Pioneer DJ DDJ-400 DJ controller
www.zzounds.com/a--3970758/item--PIODDJ400
Direct Music Service www.directmusicservice.com
30% off first month, use promo code PJMONTHLY 10% off first year, use promo code PJYEARLY
Speaking of crossfaders...
I've been having an issue with Serato that nobody can seem to help me with. I've emailed Serato a million times with no response.
Maybe you can help me???
Every time I connect my Dj controller to Serato... the crossfader on the screen disappears, and is no longer visible.
The only time I can see it is when I don't have the DJ controller connected.
What am I doing wrong??
Thanx.
Its kinda funny that you put this video up a year ago. I had pretty much given up on chirps with 400 and Rekordbox about a year ago because the cuts were too unpredictable and sounded terrible. Figured I'd just use this thing for mixing. Turned out the Cut Lag was set way too low. Changed the whole game. Thanks.
Been DJing for 20 years and I had the same issue. I always had my fader curve too sharp and always had trouble with chirps. Night and day once I figured that out.
I got so discouraged as well. This changed the game!
Don’t know how I’ve been scratching without these settings, thank you🙏
no problem!
You can fix your crossfader on entry level gear pretty easily if you don't mind desoldering/resoldering 2 contacts.
Done this myself on a few now when the fader loose some of its looseness or the sound starts to bleed through when its all the way over. So instead of throwing it away and buying a new controller or even a new crossfader which can cost half the price of the device you can just take the crossfader out, break it down and rub some cleaning alcohol along the 2 parallel contact strips on the actual board of the crossfader itself which becomes clear once you have broken it down.
It removes all residue/carbon buildup and makes them feel like new again, tight cuts, smooth, no bleed ect, just be careful when bending the 4 tiny metal clips back which you need to do to remove the metal crossfader housing from the top of the board to get at the 2 parallel contact strips you need to clean.
Thanks for making this 🔥
I can't wait to try this out. I mean the Cleveland Terry part 😂😂😂. Great tips, thank you.
Thanks for sharing man...
I like your content this really help a lot👍new subscribers here from cebu Philippines 🎧
Thank you. Did it in 5 minutes. Was so afraid to try
That comment about us techno djs is very true! Also nice crabs. I could never manage to do them in reverse 😢
Cool! I've found a fifth setting for the Magvel Fader Pro in the DJM-S9 and S11: the replaceable bumpers, so you can change the bouncing in the edges. But you have to remove the faceplate to change them. Below it, you can find a softer and a harder pair to the right to replace the default medium ones. You can find this in the mixer's manual. Cheers!
S7 Not :)
You're right, I've found that just in the S9 and S11 manuals. I'll edit the comment, thanks 👍
hey nice video ! thanks bro
can u tell me ; anti drift in serato dj pro settings...turning it on or off for scratching ?:)
Can you do this same video on the Opus Quad
👍🏾
I have the S11 and I can’t seem to find a good setting for cut lag. I was wondering where do you like to keep yours set at??
Thank you
Is there a way to adjust cut lag on a rane Seventy?
4:18 when I adjust my cut lag setting in utilities it does not save it (DJM S9) Is there a way to save it so I don’t have to readjust it when I open serato?
How are those green Reloop needles holding up? Are they up to the Concorde Scratch/Digital standard? Can you share some feedback on them, looking to get a pair since they are the only ones available in my place (can order ortofon internationally, but these Reloop ones are easier to get at my place). Thanks in advance, keep rocking!
Since I don't gig with turntables and only use them for lessons and videos, I can't really say how they will hold up. I have yet to replace the stylus after 3 years of having them, but I maybe use them 5 times a year.
I must have bad equipment because when I set it to Sharp on a Traktor Kontrol S3 Mk 3 it does not respond as your curve settings. Additionally, the Jog wheel is tight. Meaning it is tough to spin and it doesn't have a tension adjustment.
I just got a DJM-S11. Trying to level up my scratch game. What are your preferred setting for this mixer? I have all mine on default right now. Haven’t changed anything.
He literally answered your questions in the video.
I heard Pioneer coming out with the DDJ-REV10 to battle the Rane One
The DDJ-REV10 does not exist. That was a rumor that started as a prediction prior to launch that did not come true. The official launched DJ controllers are the DDJ-REV1 and DDJ-REV7.
How to factory reset ddj1000 just got it. But deck 4 is saying external input
Switch your input selector on channel 4 to your computer. It's above the trim knob.
@@priyonjoni Dah I feel like a rocket 🚀 scientist... lol. Thank you. And thank you for all of the videos that you make. And take the time to help and educate us on pioneer products. 😀😃😄😁
For number 2 u didn’t say where it’s supposed to be