Your video is very helpful and grateful. I have a problem. Rotary marking of bitmap cannot be performed at the position specified by EZCAD. I am using EZCAD (2.14.11). I would like to mark a photo When trying to do rotary marking with splitmark2, Cannot mark at the specified position. Actually, it is always marked at the center position (X = 0, Y = 0). I tried the photos with BMP, JPG, and PNG, but all the results were the same. I was able to mark at the specified position by marking on a flat surface without using a rotary. By the way, in the vector, it is possible to mark at the specified position on both the rotary and the plane of splitmark2. I'm sorry for my poor English. I would be grateful if you could tell me if you knew the solution.
Hi, i have a question, when i try to do thatin the video, the cup makes a rotation of 270º, and start engraving, i do not know how to avoid that rotation, any help will be wellcome.
I had the same question, I was told by the manufacturer of my laser to use RotaryMark the one with no spaces, split mark is something for like if you are going to break up the "image" that is being engraved, and your laser should not start making at all when you hit F1-light, thats why it has an F2 Mark button. I'd check your settings, or even your rotary device wiring.
Please understand I am not trying to be rude or disrespectful, however, you just wasted more time than it would have taken to just make a vector because even tho it has not been converted as such, it is just a vector-type file, which is Black and white, where the image is just Black, a true BMP file is an image of something that would warrant saving in that format a photo if you will of something in the world, humans animals, scenery, sunsets, etc. Which would be a totally different setup, settings, speeds, Freq. and power would all be different.
Helped tons! Thank you
Your video is very helpful and grateful.
I have a problem.
Rotary marking of bitmap cannot be performed at the position specified by EZCAD.
I am using EZCAD (2.14.11).
I would like to mark a photo
When trying to do rotary marking with splitmark2,
Cannot mark at the specified position.
Actually, it is always marked at the center position (X = 0, Y = 0).
I tried the photos with BMP, JPG, and PNG, but all the results were the same.
I was able to mark at the specified position by marking on a flat surface without using a rotary.
By the way, in the vector, it is possible to mark at the specified position on both the rotary and the plane of splitmark2.
I'm sorry for my poor English.
I would be grateful if you could tell me if you knew the solution.
Where does one buy a machine like this in South Africa?
Hi, i have a question, when i try to do thatin the video, the cup makes a rotation of 270º, and start engraving, i do not know how to avoid that rotation, any help will be wellcome.
Did u figure it out? I have the same problem
@@rubbadubdubbub not yet
Ok nice Video. Can I Ask Something? Why You Didn't used *Rotary Text Mark?* Why You Used *Split Mark 2 ?* What was Different About That ?
It's because that is literally the only way I got it to work.
I had the same question, I was told by the manufacturer of my laser to use RotaryMark the one with no spaces, split mark is something for like if you are going to break up the "image" that is being engraved, and your laser should not start making at all when you hit F1-light, thats why it has an F2 Mark button. I'd check your settings, or even your rotary device wiring.
Please understand I am not trying to be rude or disrespectful, however, you just wasted more time than it would have taken to just make a vector because even tho it has not been converted as such, it is just a vector-type file, which is Black and white, where the image is just Black, a true BMP file is an image of something that would warrant saving in that format a photo if you will of something in the world, humans animals, scenery, sunsets, etc. Which would be a totally different setup, settings, speeds, Freq. and power would all be different.