Just installed this in my 2019 Tundra. I had help from my youngest son and from start to finish, was about 40 mins. I watched this video numerous times before I had a weekend that was warm enough to install this. Due to watching this video numerous times, everything was a breeze.
I just installed this in my 2018 Tundra. I watched the video a few times and then used the video as I installed the box. I didn’t use the printed instructions. It took me about 2.5 hours start to finish. I’m very impressed with the fit and finish of this product. I also paid a lot less than the Amazon price by purchasing direct from the vendor. I would strongly recommend this product to all my friends. Great product!!!
How secure is the box? Its aluminum not steel right? That single cam lock scares me. I know this is for the smash and grab guy but nothing holds the corners. A screw driver or clawhammer and bend goes the top. Again i havent seen the product so im just speculating. What say see now that you have it.
I just installed this on a 2021 Tundra TRD Pro. After watching this video, I didn't even need to consult the instruction sheets. I didn't need to remove the seatbelt panels because the carpet slid out from underneath, and back in, rather easily. But I did have to remove the subwoofer, which was very easy. Careful with the push-start antenna wiring. On the 2021's the wiring runs along the forward cut line, from the center all the way to the far right edge. I did the installation myself, took my time, and got it done in about 2.5 hours.
Just bought this for my 21 Trd Pro, did you move the wiring harness or the box sits on top of it, did you put any insulation between the box and wiring harness? Can you still access the jack and wrenches? Sorry for a bunch of questions.
Great instructional video. Install was easy and straightforward. I did not have to remove the two rear panels or disconnect the battery. The carpet easily slid out and back in with no problems.
Just installed this in my 2019 Tundra. I’m very happy with the purchase and fit all the way around! Very impressed and would recommend this to anyone looking for extra space in their Tundra.
@@saintslax12 honestly no! A few things I did was I had all weather rear mats and I believe the manufacturer was gator. I took the provided template and outlined over the floor mats that run the entire or majority length under the rear seat. Then cut the carpet and foam also. The box/kit comes with heavy duty seat brackets that are stronger than the stock. Torqued those down. Sat the gun box in and bolted it leaving my all weather floor mat to run underneath the lip of the gun box. If I needed to vacuum under the mat I would flip the front side towards the front of the cab up. I honestly didn’t notice a bit of difference in the cab being noisier at all! It’s a snug fit but it looked legit and functioned perfectly. Keep the carpet you cut and throw that layer inside the box also. Atleast that’s what I did.
This thing fit perfectly. Probably one of the best CZcams videos I’ve ever watched for installation. Testing fit perfect in my 2017 Toyota tundra TRD max crew . I highly recommend.
Just installed this in my wife's 2016 Tundra. Video was very helpful. I did not have to remove the side molding. I was able to pull the carpet out and push it back under when putting everything back. Did have to remove the foot sill to release the carpet on the side just like in the video. Thanks for making this video,helped alot.
Just installed it on my 2020 SR5 crewmax watch the video to do the install all went well till the last 2 screws in the bottom of the box the hole was half way covered from the box used a drill to make the hole a little bigger now it fits perfect
I just installed mine in my 2020 Crewmax. The only thing that is not in this video but is mentioned in the instructions is the box for the key fob remote. When you first see it, don't panic. With the new mounting brackets, the box will sit right over the remote box. I installed mine with a moisture barrier underneath because I saw that was one possible problem with a steel box was drawing moisture and cut the carpet I cut out to line the bottom of the box. It took about 3 hours total by myself. Keep going and stay calm. Good luck
What moisture barrier? How did you place the moisture barrier? Just lay it on top of the remote box? Tape it to the bottom of the steel box? I have a 2020 and this might be useful for my install which I will do soon.
Finishing this up on my dads 1794 2017 Tundra tomorrow! We also had to remove the JBL subwoofer behind the seat to get the carpet up but it was as easy as 3 10mm bolts and a plug. Can’t wait to see this thing getting some use!
That’s a cool idea if you want a locking storage. I love your brackets and would to have all four changes out and have open storage under the seat. I hate that Toyota added the pointless foam under neither. Mine will be removed this weekend. I hope someday you guys decide to start selling just the brackets as an option.
it bolted down by 2 bolts inside into the inner seat rails, but there's 4 large horseshoe shaped slots that lock onto all 4 seat rails. in order to get the box up they would have to rip both the small bolts, as well as all 4 front seat mounting bolts, and rip the sheet metal on all 4 collars on the box apart. the box is never coming out with the seats in. i am installing one as i type this, and it's way more solidly placed than it looks.
I have a 2021 tundra, with a push start. In some videos out it show that there a harness on the center foam. Do anyone out there know if this will fit my truck?
Mr_ NutZ toyota doesn't add underneath storage so you can have a flat load floor if you need to load precious cargo into the cab, such as a TV or something
Alex Tran if that’s the case then they should have just made it completely flat like the Ford F-150. either way Tundra is still a better truck not in the cool gadgets but in quality and reliability
Yes, the torque settings for the seat bolts are in the instructions. However, in my experience installing these, Toyota is not very good at torquing the bolts. some have been so tight I had to use an impact to get the bolts loose and some just used a regular socket and ratchet.
Semper Fi Devil Dog. I see your question is 3 months old but I just installed this in my 2019 Tundra TRD Pro and no problems. So, if a Naval Aviator can do it, I'm sure it'll be no problem for a Marine. One tip regarding the last two screws that secure the box to the decking. Those screws are going into the seat rails you replaced earlier. Those seat rails have play in them during install so if your holes don't line up at the end, don't freak out or go drilling out the box holes. You can reach under the carpet to loosen the front bolt and align the holes. Harder to explain that it is to actually do.
I have a 07 tundra crewmax..I like to get one box..do you guys have one for the 07- 13 crewmax or the 14- 20 crewmax long gun box fit also..like to get one..hate to carry the gun case around.
Boom Bero no you can’t. There is a part in the video that I explained the difference in the oem brackets and ours. The oem’s are a full length channel where ours are square tube and plate.
How about 2gen Tundras? Not bad mouthing any Tundra but I would put a new engine in my 2gen before I would buy a 3gen, they have shit for storage space.
Looks like you could make that floor flat by replacing the old rails with the flat ones that you all make. It makes me think toyota left those rails because their old design was for a seat that slid up and down over those rails.
Interesting box. They steal the truck and are able to pry the door open in minutes. just keeps honest people honest. It makes your truck more desirable to steal.
C’mon man this is for smash and grab guys. These new trucks are a pain the steal anyhow. Especially mine with accelerator shut off from sprint booster.
Are you joking? No way I've got time, skill or patience for something like that. I'd dick something up for sure. All for what? To transport long guns? Nope.
Just installed this in my 2019 Tundra. I had help from my youngest son and from start to finish, was about 40 mins. I watched this video numerous times before I had a weekend that was warm enough to install this. Due to watching this video numerous times, everything was a breeze.
We love to hear this!
@@esptruckaccessorieswill you guys sell me just the seat rails??? I do not want the actual lock box
I just installed this in my 2018 Tundra. I watched the video a few times and then used the video as I installed the box. I didn’t use the printed instructions. It took me about 2.5 hours start to finish. I’m very impressed with the fit and finish of this product. I also paid a lot less than the Amazon price by purchasing direct from the vendor. I would strongly recommend this product to all my friends. Great product!!!
Thank you sir! We are glad you like it.
How secure is the box? Its aluminum not steel right? That single cam lock scares me. I know this is for the smash and grab guy but nothing holds the corners. A screw driver or clawhammer and bend goes the top. Again i havent seen the product so im just speculating. What say see now that you have it.
@@esptruckaccessories z in
Hy htttrhyhhhhhthhthhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhkmmo
I just installed this on a 2021 Tundra TRD Pro. After watching this video, I didn't even need to consult the instruction sheets. I didn't need to remove the seatbelt panels because the carpet slid out from underneath, and back in, rather easily. But I did have to remove the subwoofer, which was very easy. Careful with the push-start antenna wiring. On the 2021's the wiring runs along the forward cut line, from the center all the way to the far right edge. I did the installation myself, took my time, and got it done in about 2.5 hours.
Just bought this for my 21 Trd Pro, did you move the wiring harness or the box sits on top of it, did you put any insulation between the box and wiring harness? Can you still access the jack and wrenches? Sorry for a bunch of questions.
Great instructional video. Install was easy and straightforward. I did not have to remove the two rear panels or disconnect the battery. The carpet easily slid out and back in with no problems.
Thanks for the feedback! Glad it went smooth! Enjoy!
Just installed this in my 2019 Tundra. I’m very happy with the purchase and fit all the way around! Very impressed and would recommend this to anyone looking for extra space in their Tundra.
I see this was from 3yrs ago, did you notice an increase in sound with the foam taken out?
@@saintslax12 honestly no! A few things I did was I had all weather rear mats and I believe the manufacturer was gator. I took the provided template and outlined over the floor mats that run the entire or majority length under the rear seat. Then cut the carpet and foam also. The box/kit comes with heavy duty seat brackets that are stronger than the stock. Torqued those down. Sat the gun box in and bolted it leaving my all weather floor mat to run underneath the lip of the gun box. If I needed to vacuum under the mat I would flip the front side towards the front of the cab up. I honestly didn’t notice a bit of difference in the cab being noisier at all! It’s a snug fit but it looked legit and functioned perfectly. Keep the carpet you cut and throw that layer inside the box also. Atleast that’s what I did.
@@jroof04 Awesome, thank you.
This thing fit perfectly. Probably one of the best CZcams videos I’ve ever watched for installation. Testing fit perfect in my 2017 Toyota tundra TRD max crew . I highly recommend.
Just installed this in my wife's 2016 Tundra. Video was very helpful. I did not have to remove the side molding. I was able to pull the carpet out and push it back under when putting everything back. Did have to remove the foot sill to release the carpet on the side just like in the video. Thanks for making this video,helped alot.
Just installed it on my 2020 SR5 crewmax watch the video to do the install all went well till the last 2 screws in the bottom of the box the hole was half way covered from the box used a drill to make the hole a little bigger now it fits perfect
I just installed mine in my 2020 Crewmax. The only thing that is not in this video but is mentioned in the instructions is the box for the key fob remote. When you first see it, don't panic. With the new mounting brackets, the box will sit right over the remote box. I installed mine with a moisture barrier underneath because I saw that was one possible problem with a steel box was drawing moisture and cut the carpet I cut out to line the bottom of the box. It took about 3 hours total by myself. Keep going and stay calm. Good luck
Is that the plastic connector in the middle bracket area below the foam?
@@tcruzn1 Yes. Once you get the brackets installed the box will sit right on top of it.
Did the storage box affect the remote box working properly at all since its metal? What kind of moisture barrier did you use?
What moisture barrier? How did you place the moisture barrier? Just lay it on top of the remote box? Tape it to the bottom of the steel box? I have a 2020 and this might be useful for my install which I will do soon.
Finishing this up on my dads 1794 2017 Tundra tomorrow! We also had to remove the JBL subwoofer behind the seat to get the carpet up but it was as easy as 3 10mm bolts and a plug. Can’t wait to see this thing getting some use!
When installing this, it should be noted that you only have 1/2" wiggle room for the screws that bolt the box to the seat rails.
Totally agree. I should have measured hole to hole.
Good shit Earl! Glad to see u got ur business up n goin, I just got a 2021 Limited Crewmax, so if u need a guinea pig…..
On my mods needed list great video and product thanks a ton
Any way to just get the brackets to make the floor flat and take out the foam
That’s a cool idea if you want a locking storage. I love your brackets and would to have all four changes out and have open storage under the seat. I hate that Toyota added the pointless foam under neither. Mine will be removed this weekend. I hope someday you guys decide to start selling just the brackets as an option.
Hmm. A lockable beer cooler. How many tall boys can you fit in that bin?
Pretty good except its only bolted in by two small screws? For all that?
The 3 compartment bin is also bolted down by the seat bolts. Not sure why this one is different
Yeah, IKR!!!
it bolted down by 2 bolts inside into the inner seat rails, but there's 4 large horseshoe shaped slots that lock onto all 4 seat rails. in order to get the box up they would have to rip both the small bolts, as well as all 4 front seat mounting bolts, and rip the sheet metal on all 4 collars on the box apart. the box is never coming out with the seats in. i am installing one as i type this, and it's way more solidly placed than it looks.
I have a 2021 tundra, with a push start. In some videos out it show that there a harness on the center foam. Do anyone out there know if this will fit my truck?
Won't fit my '12 Crewmax, too bad as I'd love to have this. My Tundra doesn't give me the option for the under seat storage ability.
Wish it did...
Toyota could have made that area flat, what a waste of storage
Mr_ NutZ toyota doesn't add underneath storage so you can have a flat load floor if you need to load precious cargo into the cab, such as a TV or something
Alex Tran if that’s the case then they should have just made it completely flat like the Ford F-150. either way Tundra is still a better truck not in the cool gadgets but in quality and reliability
@jimboc yes you can add either one of the metal versions to your truck if you have the plastic. The plastic is the only one you can’t back fit.
Will this work on 2018 and 2019 crew max?
Why not make this out of 12 gauge or better yet 10 steel. Not sure on the aluminum.
Is the install same for 2021?
compatible with 2019 crewmax?
Should of had a padded interior or something to prevent the gun/s from sliding, scratching, etc
Waylon Holbrook we decided that it’s something you can add. Different strokes for different folks. I bought my foam from Carolina Foam
Fantastic! I'm eagerly awaiting the design for 2007 - 2013 model Double Cab Tundras.
mark teague coming soon!
Mark, sorry about the delay. These are available now. We thought we had made a post about it, but apparently we did not.
Do you have torque settings for the bolts? For something as important as seats, I think we want to go with Toyota's stated torque setting.
Yes, the torque settings for the seat bolts are in the instructions. However, in my experience installing these, Toyota is not very good at torquing the bolts. some have been so tight I had to use an impact to get the bolts loose and some just used a regular socket and ratchet.
I know this is an old video but is there something different starting in 2019? Fit, instructions, install, etc.....????? I have a '19 crewmax.
Semper Fi Devil Dog. I see your question is 3 months old but I just installed this in my 2019 Tundra TRD Pro and no problems. So, if a Naval Aviator can do it, I'm sure it'll be no problem for a Marine. One tip regarding the last two screws that secure the box to the decking. Those screws are going into the seat rails you replaced earlier. Those seat rails have play in them during install so if your holes don't line up at the end, don't freak out or go drilling out the box holes. You can reach under the carpet to loosen the front bolt and align the holes. Harder to explain that it is to actually do.
Will this interfere with oem+ dual sub set up?
What are the dimensions?
You should offer trays that fit behind the gun box in the middle and drivers side. Nothing special, just open top trays. Just a thought.
torque spec on those rail bolts???
If you have the plastic storage installed already, can you fit the long storage in the same spot with extra cutting and rails?
Jimbo C. Yes you can
Since you've removed insulation, does that mean the cab will be louder?
Tony Creasey not at all. That foam is not insulation. It just serves as a filler between the rails to hold the carpet up.
if the template is not laying flat, doesn't that mean the hole will not be large enough?
I have a 07 tundra crewmax..I like to get one box..do you guys have one for the 07- 13 crewmax or the 14- 20 crewmax long gun box fit also..like to get one..hate to carry the gun case around.
Our storage does not work on 07-13 due to the rear seat design.
what are the the box for the dimensions the box they have listed for the 2007 tundra double cab
Jim Newman I don’t have them listed, but I can get them for you tomorrow. Email me at earl.pike@esptruck.com and I will send them to you tomorrow.
So this is for the crewmax. Do you have something for the 2015 Tundra Double cab?
Joe Jr yes it is actually in production finally. Should be ready mid May.
They are available now. We thought we had posted about it but just found out that we did not.
Couldnt you just tap a hole in the oem bracket and install the box? ty
Boom Bero no you can’t. There is a part in the video that I explained the difference in the oem brackets and ours. The oem’s are a full length channel where ours are square tube and plate.
Hmm... I think I’m gonna wait a bit before I cut open my 2 day old 2021 Lunar Rock Tundra TRD PRO 😰
is there enough room for thin dynamat type product ?
mike schlup yes you could put dynamat under there
thankyou..!
you guys can sell only those 2 new rails like the guy on the video is installing ?
noe villegas hi there, no they are part of the kit. When we order them they make two tails per box. Sorry
I was wondering do you have one of these boxes for the 2013 Toyota tundra double cab?? If so where do I order it?
Hi Brian, sorry, just saw this. Yes we do have them available on the website. www.esptruck.com
Will it fit on a 2021 Toyota Tundra 2WD SR5 CrewMax
Yes it will fit the 2021 2wd SR5 CrewMax! You can get 10% by subscribing to our site!
It only works if you have 4WD
How about 2gen Tundras? Not bad mouthing any Tundra but I would put a new engine in my 2gen before I would buy a 3gen, they have shit for storage space.
Any plans for the plastic version of this box?
Looks like you could make that floor flat by replacing the old rails with the flat ones that you all make. It makes me think toyota left those rails because their old design was for a seat that slid up and down over those rails.
I remember reading the rear seat slide at one time, I don't know when they stopped using that design.
Have to agree ;o)
No link?
Interesting box. They steal the truck and are able to pry the door open in minutes. just keeps honest people honest. It makes your truck more desirable to steal.
"loose lips sink ships" That's the whole point. They're hidden in a safe.
C’mon man this is for smash and grab guys. These new trucks are a pain the steal anyhow. Especially mine with accelerator shut off from sprint booster.
I recommend you take down the "hey criminals, I have a safe with some valuable shit under my rear seat" sign from your truck then.
Are you joking? No way I've got time, skill or patience for something like that. I'd dick something up for sure. All for what? To transport long guns? Nope.