The tension in this whole build process was palpable, even a year and a half later. That's one very impressive helmet! (Note to self: allocate 80% of project time for sanding. So much sanding...)
Amazing work.. an acquaintance from the RPF made this helmet some years ago and it took months to sculpt and find parts and build and wire (not to mention his years of prop making knowledge) to make and he sold it for a very large undisclosed sum to an undisclosed buyer and I always thought this standard would be out of reach for the 'hobby maker' but you did it, under time pressure and the end result is stunning... this is really impressive!
Really great work! It turned out really fantastic. I think I was most impressed with how well the tinting came out haha. Also cool to see another Houston maker :)
Stellar job. One tip for tinting visors in the future...spray the inside of the visor as opposed to the outside. There's no need to clear-coat the inside as nobody will see it and it's not needed on the outside. You also won't chip or scratch the tint should you bang or drop it and can easily buff out small outside surface scratches with automotive wax. I've done it on rc car bodies to protect the paint and it gives the visor more depth of colour because you're looking through that thin layer of clear. Otherwise, fanfreakintastic work.
I was listening to daft punk right now and I decided to search here for "making a daft punk helmet" I watch your videos and I wasnt disappointed!! You have amazing skills and earned my respect and sub!!!
Your build is incredible! I'm in college right now and I think I might try and build this, the series of videos being the inspiration. This would be the coolest costume ever if I can pull it off. Great content, you're inspiring others!
Aaargghhh sooooo good!!!! And made just in the nick of time! The helmet is awesome, the board and code powering it is awesome, the maker fare is awesome, it's all just awesome. 🙌🏻🙌🏻🙌🏻🔥🔥🔥🔥😍😍
OMG!!!!!! You've done GREAT job!!! Since the Spider-man MM game came out, I have been wondering, how to create 2020 Miles Morales suit mask And then I see you!!!! I am so grateful to you!🌹🌹🌹
con gratulation! i have the same helmet printed, but i got stuck with the vac forming part! still have to do this one! very incuraging seeing yours finished!
this was such an amazing thing to watch, not just the beautiful job you did, but also all of the things you learned along the way. thank you for posting this series :)
Just saw the Becky Stern video with you and Naomi. Decided to check you out. This series of videos were the first ones I watch and you just earned my subscribe. I look forward to working through the back catalog.
Uhh for the hard ass work you did and you Executed it perfectly. I give you my respect. My hat to you. And my subscribe!! Dam that was good now I need to make my own Sith Lord helmet 👍🏿
Nice build! I just landed here from Colinfurze channel and I gotta say I got tears in my eyes!!! This project has been amazing! Subed and looking forward to more interesting stuff!
Very inspirational set of videos. I always thought you needed a lot money and equipment to make props but after these video now I want to start creating. Thanks.
Looks awesome would love to see it GOLD and maybe some sort of light defuser over the light so you don't see the harsh LED light shape. But its super cool!😎
Amazing job. Funny I stumbled upon your video. I am about to buy my first 3d printer and I'm soooo excited. I've been a fan of Daft Punk since like 1998 and I wanted to make both of the helmets.
I love this build SO SO MUCH. It turned out incredible!
3D Printing Nerd your interview made me know this project and follow.. thanks.
THANK YOU SO MUCH!!!
I've been waiting my entire life for this video! I'm so freaking impressed with this project and how much work you put in to make it so perfect!
Making a ‘Daft Helmet’ was also on my ‘bucket list’. Not anymore... what a difficult and complex process! Respect! ⚒👍⚡️
This was such a good series!!! Part of me was really worried that the helmet wouldn't get made in time. I'm glad it did!
cchris667 thank you! I was really worried too :)
The tension in this whole build process was palpable, even a year and a half later. That's one very impressive helmet! (Note to self: allocate 80% of project time for sanding. So much sanding...)
Yes!!!!!!! The waiting is over!! The helmet is so perfect and shiny and those lights!!!! This was an awesome series!! 👍👍👍
Thank you so much!! :D
Amazing work.. an acquaintance from the RPF made this helmet some years ago and it took months to sculpt and find parts and build and wire (not to mention his years of prop making knowledge) to make and he sold it for a very large undisclosed sum to an undisclosed buyer and I always thought this standard would be out of reach for the 'hobby maker' but you did it, under time pressure and the end result is stunning... this is really impressive!
Really great work! It turned out really fantastic. I think I was most impressed with how well the tinting came out haha. Also cool to see another Houston maker :)
This is easily one of the most impressive 3D printing projects I've ever seen! So cool!
Thank you so much!!
Estefannie Explains It All I really want to work in CS when I leave school and your videos are really inspirational.
Stellar job.
One tip for tinting visors in the future...spray the inside of the visor as opposed to the outside. There's no need to clear-coat the inside as nobody will see it and it's not needed on the outside. You also won't chip or scratch the tint should you bang or drop it and can easily buff out small outside surface scratches with automotive wax. I've done it on rc car bodies to protect the paint and it gives the visor more depth of colour because you're looking through that thin layer of clear.
Otherwise, fanfreakintastic work.
You didn’t just make it, you absolutely nailed it.
i SO appreciate this series. I actually sat and enjoyed it all the way through as I'm printing my Guy Manuel helmet. #inspiration
Haha I love your videos. I'm bummed I haven't seen these sooner! This project is awesome
This is the coolest thing I have ever seen
the world needs more people like you
Accidentally stumbled on this then watched all 3 vids. You have earned a subscriber 👍🏼
I was listening to daft punk right now and I decided to search here for "making a daft punk helmet" I watch your videos and I wasnt disappointed!! You have amazing skills and earned my respect and sub!!!
That turned out really cool and I would normally not approve of wasting ribbon cable, but this is a perfectly acceptable place to put it hehe
These set of videos are soooooo good! Well done!
Your build is incredible!
I'm in college right now and I think I might try and build this, the series of videos being the inspiration. This would be the coolest costume ever if I can pull it off.
Great content, you're inspiring others!
Is there any way I could contact you if I have build questions?
That really is a thing of beauty!!! Amazing!!
Randomly stumbled across your video. Amazing work & dedication.
Thank you!!
Incredible work Estefannie. I was blown away by the look, form, and function of the helmet !
Aaargghhh sooooo good!!!! And made just in the nick of time! The helmet is awesome, the board and code powering it is awesome, the maker fare is awesome, it's all just awesome. 🙌🏻🙌🏻🙌🏻🔥🔥🔥🔥😍😍
GlenCodes yes! I barely made it! It seems like it took me way longer to edit the video than make the helmet though 😂
OMG!!!!!!
You've done GREAT job!!!
Since the Spider-man MM game came out, I have been wondering, how to create 2020 Miles Morales suit mask
And then I see you!!!! I am so grateful to you!🌹🌹🌹
Loved this series! Amazing finished result
Nice, saw other daft punk helmets, but this stands out as you can see wearing it. A trade off for less lights, but still worth it.
con gratulation! i have the same helmet printed, but i got stuck with the vac forming part! still have to do this one! very incuraging seeing yours finished!
Quedo fantastico. Muy bueno. Felicitaciones y saludos desde Argentina.
Good job, I was waiting for this video so long, I was following this helmet project since the maker fair, thanks for posting. (From Iraq)
Hayder Jawad thank you so much for your patience and for following along!
this was such an amazing thing to watch, not just the beautiful job you did, but also all of the things you learned along the way. thank you for posting this series :)
Hey great job. As well as a maker demonstration, it’s also an ideal demonstration of tenacity and determination.
LOVE IT! Greetings from Brazil ;)
wow that was intense, and it came out freakin cool. Great job!
Just saw the Becky Stern video with you and Naomi. Decided to check you out. This series of videos were the first ones I watch and you just earned my subscribe. I look forward to working through the back catalog.
awesome build! nice to see it all come together.
turbo2ltr thank you very much!
Epic - from development to final execution! 😃
Whoa, this is a pretty good process in making this, impressive.
Uhh for the hard ass work you did and you Executed it perfectly. I give you my respect. My hat to you. And my subscribe!! Dam that was good now I need to make my own Sith Lord helmet 👍🏿
Well done ! What a journey 😱
Nice build! I just landed here from Colinfurze channel and I gotta say I got tears in my eyes!!! This project has been amazing! Subed and looking forward to more interesting stuff!
I just finished building an X-Wing helmet and you have inspired my next project! Great job!
Dudeeee!!!! This is wayyy beyonndd AWESOMEEEEE!!!!!
Lol 😂 I love how you put the names of their songs as the title things
felicitaciones valió la pena todo el trabajo y esfuerzo puesto en tu proyecto
Very inspirational set of videos. I always thought you needed a lot money and equipment to make props but after these video now I want to start creating. Thanks.
Looks awesome would love to see it GOLD and maybe some sort of light defuser over the light so you don't see the harsh LED light shape. But its super cool!😎
Great job on the helmet, and the videos!
Andy Warburton thank you :)
ahhhhhhhhh, i dont know what im more jealous of. the helmet or your guy lol. love that helmet!
Freaking awesome!!! If I had more hands I would give you 10 thumbs up. Great job. Love it
I am so glad you made it. Wow.
I want to learn how to do this so badly....this was amazing 👏
Felicidades! Quedo increíble el casco, me motivas a retomar mi proyecto!
Nice job dude!!!! You've got some skills!
Amazing job. Funny I stumbled upon your video. I am about to buy my first 3d printer and I'm soooo excited. I've been a fan of Daft Punk since like 1998 and I wanted to make both of the helmets.
This channel needs more subs Loved it :D
hahah so much fun to watch! very good job!
just awesome! total admiration
Hey ! A big GG to you ! Incredible work, your helmet is really cool. Do you have other project like this one ?
YESSS! It's finally on here!
Badass! Congratulations on making the deadline!
Pretty cool daft punk helmet wicked
Unbelievable!! I need to make this! Great videos amazing job 👏 👍
Thank you! Cheers!!
I didn't even get notified of part 2
Steuen Wonton oh no!! Make sure you hit the bell if you want notifications on :)
Really awesome work in this video! Your component integration skills are really becoming impressive
Great Editing 👍
Thank you!
dude this is so sick, now I'm going to have to get a 3D printer and do it
You could make it out of other materials
I love it. I wish I had the patience to make one 😆
I like it, I would paint mine gold but you put in the work and im glad to see another one of these out there.
Awesome! you were a truly warrior in the making :))
This is still relevant!!!
Absolutly genius
Nice work Estefannie! :D
speachless. this was an epic build!
Wow! That looks so impressive, love it!!!
Awsome......Looking so good.....
It's a very...very...very nice work...I love it!...
You are the greatest human!
Yay!!!! that rocks!
Con este vídeo conocí tu canal jsjs
Aún tengo ganas de hacer esto, pero de momento no tengo impresors 3D ;-;
I am in love with this quirky, funny,smart and beautiful lady! Consider me subscribed!
This was awesome.
so beautiful
Love it! Really cool
I would be so proud
Congrats girl!
holy shit great job !!!
Awesome build!!! 🏆🏆🏆
GREAT WORKKKKK ✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨✨
Wow I am so impressed!! You did a great job
I would have preferred it in gold but it's really impressive. Great job.
Such a great build. Love that helmet, well done!
I think that is time to try it.
AWESOME! And such a cool keyboard =)
Awesome work 👍❤️
I love daft punk
great work.
I’m going to make one
I was wating for the last video
Great job!