Best video I have seen on belt replacement for these vacuums. The details were extremely helpful--from the clip, to ensuring the self-propel mode is off, to ensuring it is in the carpet mode, to most easily and correctly getting the new drive belt on. Fantastic! Thank you!!!👍
We have the same model (purchased 2012) and this was the first time replacing the belts. Not all that difficult but the tip about using thumbs to roll the drive belt onto the pully was most helpful. Went on just as it should and we're back in the vacuuming business. Thanks for the help. Undoubtedly we'll be back...............
After watching a few of these videos on CZcams, yours was by far the best and most thorough. I was able to resolve my issue thanks to you! Thank you and THUMBS UP!
Tuned in to your video thinking I had to dismantle the vacuum to change the Belts. Great explanation on the V belt to check for wear. Very helpful. Thank you, Stay Healthy and Be Safe.
Thank you for this tutorial. I thought the small belt was the wrong size. Forgot it puts tension on the belt when you drop the handle and start to vacuum...It was my mother's vacuum. It can suck the fiber out of carpet. 👍👍👍
Thank you, I have a U3101 model hoover which I think is 1 of the 1st self propelled models, it still works great, but all anyone showed were the wind tunnels, with the 1 belt, so when you started talking about the drive belt release so it would spin freely, I remembered that thats what I had to do, this vacuum is so old that I don't have the book 4 it anymore so thank you for the reminder after I released the drive it spun freely and I got it on and put on a new brush belt as well and I'm up and running again
I forgot about the tensioner belt when I took it off then I saw the little pulley on the bottom after your video thank you it was very helpful. It's always nice having extra belts which I have.
I wasn't able to get that flat belt around the large pulley after many tries and sore thumbs but found it was fairly easy to do by using one thumb and the round handle end of a medium crescent wrench to push the rubber belt back and down around the pulley.
Have this exact vacuum. The belt was starting to come off about every other time I used it. I wish you didn’t have to disassemble the vacuum to change it. I’ve ordered a replacement belt which I hope fixes the problem.
Thank you for the video. I've replaced the large belt many times when the roller stops turning, no problem. The small V belt is relatively new and in good condition. However this time my current issue is the old and now new large belt comes off the pulley within seconds of starting the vacuum. I remove the cover and the large belt is off the pulley I've tried new fresh belts from different sources to try and resolve the issue. Its got me stumped. Everything else about the vacuum works as designed. Do you have any suggestion to prevent the large belt from coming off the pulley?
Great video. I have a Hoover self propelled Hoover wind tunnel Model U6450-900 unit. My brush was no rotating so I replaced both the belts with new ones but the brush sill does not rotate. The belt connected to the brush seems slack. Is there a tension pulley. The sweeper is on carpet. Any suggestions please? Thanks.
The skinny belt (v-belt)will appear slack when the vacuum is in the locked upright position. In the back position the tension pulley will apply pressure to the v belt. There is a lever on the hood that prevents the pulley from activating so be sure that lever is in “carpet” mode. If still not turning you need to check to see if your bearings are free. Also often the flat belt (last 3 digits 035) must be a fresh belt. If it’s old and dried out it may not work even though it’s “unused.”
@@richardsvacuumcenter Thank you for your prompt response. I am using brand new belts but the beater brush is is not rotating. Where is this tension pulley. I can’t see it. Is it possible to remove the top cover and the two knobs so I can see if they are connected properly? Sorry to bother you with this 23 year old unit but as a 73 year old man I enjoy fixing things and learning new things. Thanks for your patience.
Make sure the knob on the front of machine is in “carpet” mode. Also brush will not turn when locked upright so make sure when you test it to have the handle back.
I'm actually having an issue finding the right belt..... My grandma's windtunnel is an older model (bag) and needs a new belt. It's just 1, not 2 belts. I ordered one from Amazon from the belt part # on the bottom of the vaccuum, but when it came, it's too short! How do I get the right belt to fix her vaccuum???
if you ordered the exact part number as on the vacuum you did get the right belt and they are supposed to be smaller since they rely on stretching tension to drive the brush through carpet without stalling. One common problem with online belts is the belt could be old and dried out so the elasticity of the rubber could make it a bear to install (and will ultimately not last as long as a fresh belt). I would drop by a local vac shop and pick one up or I can ship you one if you're in the states for about $10. let me know!
Please help. Both belts replaced, and I still have a burning smell. It is picking up, and the self-propelled is working, but something is still not right. Any advice?
That’s gonna be difficult for me to properly diagnose without seeing it or hearing it for myself. It may be wise to have a local vacuum shop take a look at it.
what was the # on that belt?? I ordered one from Amazon, but it is not going on like yours did because it seems to be farther away from the roller than yours was..........
They never show a woman doing this !! Thank you but this self propel belt is a bi--h to replace. My fingers were so soreBUT, I got it thank you for your video 😳
Best video I have seen on belt replacement for these vacuums. The details were extremely helpful--from the clip, to ensuring the self-propel mode is off, to ensuring it is in the carpet mode, to most easily and correctly getting the new drive belt on. Fantastic! Thank you!!!👍
Without a doubt this is the best video on replacing your vacuum belts. Solved my questions and made it easy!!
Not only did you show extremely well how to replace the belts, you also gave tips on V-belt!
Well done!
We have the same model (purchased 2012) and this was the first time replacing the belts. Not all that difficult but the tip about using thumbs to roll the drive belt onto the pully was most helpful. Went on just as it should and we're back in the vacuuming business. Thanks for the help. Undoubtedly we'll be back...............
After watching a few of these videos on CZcams, yours was by far the best and most thorough. I was able to resolve my issue thanks to you! Thank you and THUMBS UP!
Excellent video - especially the tip for getting the flat belt back on the pulley!
Tuned in to your video thinking I had to dismantle the vacuum to change the Belts. Great explanation on the V belt to check for wear. Very helpful. Thank you, Stay Healthy and Be Safe.
Letting me know the belt will feel loose was helpful.
Thank you! The wide belt came off my vacuum when it sucked up a bunch of yarn. Your video made it simple to put the belt back on right.
Thank you for this tutorial. I thought the small belt was the wrong size. Forgot it puts tension on the belt when you drop the handle and start to vacuum...It was my mother's vacuum. It can suck the fiber out of carpet. 👍👍👍
Thank you, I have a U3101 model hoover which I think is 1 of the 1st self propelled models, it still works great, but all anyone showed were the wind tunnels, with the 1 belt, so when you started talking about the drive belt release so it would spin freely, I remembered that thats what I had to do, this vacuum is so old that I don't have the book 4 it anymore so thank you for the reminder after I released the drive it spun freely and I got it on and put on a new brush belt as well and I'm up and running again
Great job! Tip on replacing the belts were very helpful. Thanks.
I forgot about the tensioner belt when I took it off then I saw the little pulley on the bottom after your video thank you it was very helpful. It's always nice having extra belts which I have.
Thank you! Great teaching and tips! You explain very well!
Glad it was helpful!
Great help! Thank you for sharing 😊
Just what I needed, thank you!
Thanks for your great video!
I wasn't able to get that flat belt around the large pulley after many tries and sore thumbs but found it was fairly easy to do by using one thumb and the round handle end of a medium crescent wrench to push the rubber belt back and down around the pulley.
Great!
Nice job on your video, thank you 🙂👍
Have this exact vacuum. The belt was starting to come off about every other time I used it. I wish you didn’t have to disassemble the vacuum to change it. I’ve ordered a replacement belt which I hope fixes the problem.
Totally agree with Rainbow and Barbara! :-) Thank you!
Thanks! I appreciate the feedback :)
Awesome! Thank you.
Thank u so much omg helpful
Thank you for the video. I've replaced the large belt many times when the roller stops turning, no problem. The small V belt is relatively new and in good condition. However this time my current issue is the old and now new large belt comes off the pulley within seconds of starting the vacuum. I remove the cover and the large belt is off the pulley I've tried new fresh belts from different sources to try and resolve the issue. Its got me stumped. Everything else about the vacuum works as designed. Do you have any suggestion to prevent the large belt from coming off the pulley?
what is the belt number you are using? should be 38528035
Great video.
I have a Hoover self propelled Hoover wind tunnel Model U6450-900 unit. My brush was no rotating so I replaced both the belts with new ones but the brush sill does not rotate. The belt connected to the brush seems slack. Is there a tension pulley. The sweeper is on carpet.
Any suggestions please? Thanks.
The skinny belt (v-belt)will appear slack when the vacuum is in the locked upright position. In the back position the tension pulley will apply pressure to the v belt. There is a lever on the hood that prevents the pulley from activating so be sure that lever is in “carpet” mode. If still not turning you need to check to see if your bearings are free. Also often the flat belt (last 3 digits 035) must be a fresh belt. If it’s old and dried out it may not work even though it’s “unused.”
@@richardsvacuumcenter Thank you for your prompt response. I am using brand new belts but the beater brush is is not rotating. Where is this tension pulley. I can’t see it. Is it possible to remove the top cover and the two knobs so I can see if they are connected properly? Sorry to bother you with this 23 year old unit but as a 73 year old man I enjoy fixing things and learning new things. Thanks for your patience.
Changed both belts but beater brush to turn. Suggestions??
Make sure the knob on the front of machine is in “carpet” mode. Also brush will not turn when locked upright so make sure when you test it to have the handle back.
I'm actually having an issue finding the right belt.....
My grandma's windtunnel is an older model (bag) and needs a new belt. It's just 1, not 2 belts. I ordered one from Amazon from the belt part # on the bottom of the vaccuum, but when it came, it's too short!
How do I get the right belt to fix her vaccuum???
if you ordered the exact part number as on the vacuum you did get the right belt and they are supposed to be smaller since they rely on stretching tension to drive the brush through carpet without stalling. One common problem with online belts is the belt could be old and dried out so the elasticity of the rubber could make it a bear to install (and will ultimately not last as long as a fresh belt). I would drop by a local vac shop and pick one up or I can ship you one if you're in the states for about $10. let me know!
Nice tutorial. What kind of electric screwdriver did you use. Very fast.😊
It’s pneumatic! I think it’s 50+ years old. Made by the Florida pneumatic company
Please help. Both belts replaced, and I still have a burning smell. It is picking up, and the self-propelled is working, but something is still not right. Any advice?
Check the bearings in your brushroll
Why my is doing noise I already changed the filters and check the belt and cleaned it?
That’s gonna be difficult for me to properly diagnose without seeing it or hearing it for myself. It may be wise to have a local vacuum shop take a look at it.
what was the # on that belt?? I ordered one from Amazon, but it is not going on like yours did because it seems to be farther away from the roller than yours was..........
I added the belts in the description. Thanks for asking
Not seeing any "description". Thanks anyway.
They never show a woman doing this !! Thank you but this self propel belt is a bi--h to replace. My fingers were so soreBUT, I got it thank you for your video 😳
lol yeah this belt is definitely a tricky one especially if you have smaller hands! glad to know you got it and that my video helped you!
Whole heartly agree! It's tough, but like you, I got it on because of how well this guy explains it.
Weep s
?