Klipsch RP-404c vs RP-504c vs RC-64 III | Center Channel Speaker Comparison! Tech With A Tech!
Vložit
- čas přidán 30. 04. 2020
- In this episode of Tech With A Tech, watch professional Divine Audio Visual techs compare the Klipsch RP-404c vs RP-504c vs RC-64 III Center Channel Speakers. We can help you decide what is best for your room and lifestyle.
Promo Ended. Text or Call 214-600-4144 for new promo ...Old promo...Gift card with the purchase of one of the below units. $75, $100 or $150. Gift card must be used on a future purchase. Promo ends in 60 days from the time of posting this video. Gift card can be used on a future order of $100 or more and does not expire.
504C Specs:
FREQUENCY RESPONSE 58-25kHz +/- 3dB
SENSITIVITY 97dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK) 150W/600W
NOMINAL IMPEDANCE 8 ohms compatible
CROSSOVER FREQUENCY 500Hz/1500Hz
HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid
Cross-Section Tractrix® Horn
LOW FREQUENCY DRIVER Quad 5.25” Cerametallic Cone Woofers
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port
INPUTS Single Binding Posts
HEIGHT 6.81” (17.3 cm)
WIDTH 31.13” (79.1 cm)
DEPTH 14.46 (36.7 cm)
WEIGHT 34 lb (15.4 kg)
FINISH Ebony, Walnut, Piano Black
ACCESSORIES Rubber Feet
404c:
FREQUENCY RESPONSE 59-25kHz +/- 3dB
SENSITIVITY 97dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK) 125W/500W
NOMINAL IMPEDANCE 8 ohms compatible
CROSSOVER FREQUENCY 500Hz/1500Hz
HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid
Cross-Section Tractrix® Horn
LOW FREQUENCY DRIVER Quad 4” Cerametallic™ Cone Woofers
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port
INPUTS Single Binding Posts
HEIGHT 5.7” (14.39 cm)
WIDTH 26.0” (66.04 cm)
DEPTH 13” (33.02 cm)
WEIGHT 28 lb (12.7 kg)
FINISH Ebony, Walnut, Piano Black
ACCESSORIES Rubber Feet (4)
RC64iii Specs
FREQUENCY RESPONSE 57-24kHz +/- 3dB
POWER HANDLING 200W / 800W peak
SENSITIVITY* 99 dB @ 2.83V / 1M
NOMINAL IMPEDANCE 8 ohms compatible
HIGH FREQUENCY HORN 6.25” square 90˚ x 90˚ Tractrix® Horn
HIGH FREQUENCY DRIVERS 1.75” (4.45cm) titanium diaphragm compression driver
CROSSOVER FREQUENCY 1,000 Hz & 1,400 Hz
LOW FREQUENCY DRIVERS Quad 6.5” (16.5cm) Cerametallic cone woofers
INPUTS Dual binding posts / bi-wire / bi-amp
ENCLOSURE TYPE Sealed
HEIGHT 8” (20.3cm)
WIDTH 35.8” (91cm)
DEPTH 15” (38.1cm)
WEIGHT 55 Ibs (25kg)
If you need additional advice, leave a comment or give us a call at 214-600-4144. Serious inquiries only and we are happy to get you the best pricing in the United States as well as free shipping.
Avoftomorrow.com
Please Subscribe / divineav We are professional AV and Home Theater | Home Theatre installers in DFW Texas.
Custom system design - Free of charge - Call our audio engineer Warren 214.600.4144
Website: Avoftomorrow.com
Email: divineavinc@gmail.com
Service Areas: Home Theater installation DFW | Home Theatre installation Dallas | We service DFW Dallas area including Frisco, Mckinney, Prosper, Little Elm, Las Colinas, Irving, Celina, Melissa, Southlake, The Colony, Savanna, Lewisville, Carrolton, Plano, Allen, Fairview, Lucas, White Rock, University Park, Highland Park, Flower Mound, and parts of Austin by request.
song credit • Tobu - Return To The Wild - Věda a technologie
Just the exact comparison I was looking for. Thank you guys!
Thanks for this, best AB(+C) test video I've seen!
Just bought the rp504c matches well with the rp6000f's. Thanks for your demo, it made the difference for me.
Also love your demos
The perfect comparison video. Brief explanation of each speaker with specs then demo each speaker side by side (with a great track by the way) - thanks from Australia!
Thank you very much. We really appreciate you taking the time to write that. Glad you enjoyed it.
That RC-64III THOUGH!
Awsome Videos Guys👍! Keep em coming🔥👌 I'll get mine, 504c tomorrow!! I'm excited! Time for build up some Klipsch system over here. I did also sub. to your channel!
Amazing demo, loved it, looking at upgrading from the 404 to the 504 and you made the decision an easy one.
Glad we could help Ed. We'll be doing a lot more speaker reviews in the near future. Just upgraded from the 500c myself upto the the THX 6000. Put a dent in my pocket but more than worth it. We'll be doing a full review on that one next week, stay tuned and check that one out as well my friend;)
The best demo video ever!! Thank you very much.
That was most helpful! Sounds like unless you have a huge room and massive power, the RP-504c will sound fantastic as part of any home theater and felt like tighter of the 3.
This is THE BEST DEMO of gear I have ever seen! To top it off, these gentlemen are genuine & cool 1st & foremost, honest, & super passionate about their craft. Well done! You've sold me on the 504c!!
Thank you very much for the kind words. We greatly appreciate it. We love the business!
Excellent demo! It basically helped me in my final decision ,so I want and bought a Klipsch RP-504C II. Keep up the good work !
Regards from Montreal-Canada.
Thanks for this review.. Wasn't going to get the 404c but now its deffo the 504c.. cheers.
504 sounds really nice but the 64 blows it out of the water.
that compression driver is all the difference.
Great demo...I'm sold...I ordered the RP-504c to pair with my RP8000's
GREAT COMPARISON THANK YOU!!!
Just got one of the RP 504c can't wait to set it up in my system. I went with the medium size because I live in an apartment building and you can't play movies too loud
but it's enough where the clarity and sound is there in my opinion should be a great addition to the 7.1 ch system.
P.S of course the biggest one sounds the best no doubt about it...
Great comparison videos, guys.. very well done,.. thank you
That was a great demo cheers
Well done...thanks for the demo👍👍
You're very welcome my friend
Just went with the 504C.
Thanks for the great demo!
I was about to buy 404 .. now will save up for 504 :)
@@uprajsingh me too I went for the rp504c and love it, matches beautifully with the rp6000f's
@@poisedonis I was thinking to pair them with RP6000F's I think they will sound better compared to RP-600C :)
@@uprajsingh I agree
Hi, great video comparison, well done! Just a quick question, I already have the RP-500M will the 404C be a good match for them?
Man! Good video. Will give you guys a call when I go from the 450 to the 64.
Would like to hear a demo between the 450c and the 504c, same specs, 450c is $400 cheaper right now. Just concerned about timbre matching to front left and right rp-5000f?
Thank you for the comparison. I ordered the 504c to go with my Klipsch R 820 F tower speakers bought this month. I’m glad I ordered the 504c now that I listened to this comparison. Makes me wish I had the money for the big dog.
Awesome I'm glad, it's a great speaker. It will be an awesome addition to your system. Let us know if you need anything else.
The RP-504c have better tweeters and IMO crossover I have the RP-5000 and they sound Amazing. I would never go back to the RF-line
Great illustrations and sampling of the speakers. Your demonstration of the speakers was excellent especially by alternating between all the speakers and breaking it down afterwards. My choice would be the RP-504 c. Thanks
Thank you so much for your support and detailed comment. We will have some more content coming out soon. Thanks brother
I love that your are doing center channel video, not a lot of these AV channels cover center channel coverage. I personally feel that you should base your speakers, especially for an HT system on which center channel you like the best. I recently had a Klipsch system myself, Growing up Klipsch was the speaker I wanted. I ran the RP 600c as my center and the 6000f for my front speakers. I recently changed over to the SVS ultra bookshelves as my front speakers, mainly based on how I really enjoyed the SVS ultra center. The sound and dialogue out of the ultra center is amazing!! Anyway great video keep up the awesome content
Yeah, we saw that there was an opportunity there to create some good quality content. We plan on doing more. Yeah we may do some SVS comparisons at some point. The 504c and rc64iii can hold their own against a lot of other high-end equipment. Enjoy your system brother, we always appreciate your input on my channel!
Excellent reveiw, thanks!
I have upgraded my bedroom theater to all Reference Premier except the center (RP-4000F, RP-400M, RP-140SA) of which I am using the R34C. I was planning on picking up the RP-404C so all speakers are uniform and the same size, would there be any advantage in moving up to the RP-504C? AVR is a Marantz 6014.
That RC-64 sounds amazing!
Excellent comparison
I just bought the Rp-8000F and the rp-500c only thing in stock but sounds great. Am i gonna any differance with the 404 or 504 comapred to my RP-500C?
If you are going with the RP 500m as your left and right speakers but only have room for the rp-404c underneath your television as the center channel will it be too unbalanced? Well the quad 4" woofers in the 404c be able to work with the sungle 5" woofers of the left and right speakers??
Hey guys, which one would be better between the RP600C and RP404C? Better to have two bigger 6" drivers or its better to have for 4" drivers? Thanks!
Great review! Do you think I can pair my front left and right speakers, the klipsch rp-8060fa, with the Klipsch RC64?
Great 👍 if you have RP 8000f fronts would it be better to go with RP 8000f for the centre or the RC 64 lll, Do you ship to Australia
HI! I Bought the RF7III, I have the 502C center, do you think it will be a problem? A lot of people say that the towers and center channel have to match, but is it really that important? is it a big difference? The RC64III is a lot more expensive than the 502C. Thanks for the video Btw!
Would you guys recommend the RP-404c or a RP-600c? I can get either one for the same price.
Why do i have to have so much what for the RC-64? Isn't it just double the what for 3 db (or 10 times what for 10 db). Can i not just use an amp which has just 80 watts? If you want to hear 10db louder you need 800 watts? Or are there some other points? Maybe the sound?
Hi, which center would you pair with the klipsch 650 thx ultra fronts? I know that the 650 is paired as acenter but since I have one sub (svs ultra) I need acenter that has more bass.
Just purchased the 404, But im worried that my Marantz NR1710 wont have enough power to give the true sound of this speaker. Do you guys have any advice ?
Hi Guy, is RP-504C or RC64 iii gives a perfect match to Klipsch RF7 MK3? Since RF7 MK3 is ported, and RP-504C is also ported, will they match better? Thank you
504 Sounds Great Sounds Amazing🎧🏆🏆🏆🏆🏆🎧💯
I thought the 64sounds much louder and deeper
I've been looking at upgrading my klipsch RP500c to the RP504C but I just watched another video where there's a huge drop off in signal at certain frequencies that basically requires modifications. Hmm...
If I get the RC64 will I need anything other than the receiver to power it? I have a Yamaha RAV531. Any recommendation on an external amplifier needed? My setup is a 5.1 and I want to get Dolby Atmos in the future.
The Best for me to hear clearly sound fidelity R 504 the Center of great harmony ✨💫😍😍😍🤞🎀❤️❤️❤️🎀💯
Answered my question. Thanks!
Hi guys, awesome vidéo !
I just get the 504 ii and wanna get more power out of it.
Will it be fine if i pair it with a 100watts mono power amp ? Will i get a good amount of power ?
It's a 30x15 dedicated atmos home theater room, i already run a preamp for my fronts.
Thanks, i order the 504C II for my pair of RP8000F II
Your thoughts, out of the 3 you demo, which center speaker would sound better with the Yamaha RX3080?
What a review!! You really are the best channel for Klipsch to buy.
I have a different sort of question for you. I was looking for my front LRC. I am using Marantz SR 6015 and thinking of Dali Opticon 6 as my left and right. Dali has their own center for Opticon series but I felt Klipsch is much more clear in Certer stage.
If I pair 504c will the speaker sound stages match? I know I am breaking the concept of same brand LRC speakers.
I have the 504 and I thought it is the best for the money after hearing your comparison plus I have the 800ftowers and 400watt sub from Klipch good quality and worth the money.
I have the Denon AVR S940H which one is the best for that system
Subscribed!
thanks for the comparison, i currently have a RC62 and been looking at the rc504, would it be an improvement ? my avr is marantz SR7012 and other speakers are RF82 and RS62. thx
Yes Klipsch RP- line is way better IMO
Is the rc 64 work probably with av 8805 and mm8077?
You guys have a deal on the RC-64iii? Does biamping make a difference on the RC-64iii?
Love your videos. I ordered the 504c because of this comparison. Starting my home cinema collection! One question: which amplifier is good enough to make sure this center speaks works correctly? How many Watt output do i need? I understand it has to be based on 8Ω.
Thank you in advance!
Wonderful!!! Its such an awesome speaker. We'd recommend something like an Yamaha 880BL or 1080bl minimum. Feel free to send us an email at divineavinc@gmail.com and we can get you a price. Also, any future Klipsch surrounds etc, we'll take care of you. Thanks bud.
@@DivineAV Thank you for your answer! You guys don't send to the Netherland, do you?
Very nice video!!!
Love the video! How does the 504c compare with the 500c? Is it worth the upgrade?
They all sound great but the RC-64 sound is huge and more detailed, the difference is incredible. I would definitely go with the 64 out of the three. I have an older Klipsch center speaker, the RC-7 along with the RF-7ll towers and I’m powering them with two 300 watt emotiva xpa 2 generation 2 amplifiers. They sound fantastic.
Hello sir. I just bought a klipsch rc7 and I've noticed you owned one too. I was curious if a 200 wpc amp at 8omh will be enough to bring the rc7 to it's full potential. Thanks in advance
@@chucknorris2266 Oh yeah, that’s plenty of power, enough to make that baby sing.
@@bphilbac oh nice. Appreciate the reply thanks
Good demo guys and l could actually hear the difference between them 👍 The BIG boys the one to have, but then as you say it’ll need some serious $bucks to drive it!
Hi, Thanks for this nice comparison. I just had a question for you. I currently have Klipsch RP6000F for Front L&R and Dual SVS PB2000 in a 5.2 system, hooked up to a Denon X3500H. What would you advice for a centre speaker to sonically match my HT, between RP 504C and RP 404C? The Crossover is 80 Hz and 90 Hz for Fronts and Centre. Many Thanks. Cheers.
Hey my friend, the Timbre on both units would match up perfectly. You can't go wrong with either unit but at the current price point, I would consider just jumping up to the 504c. It produces more sound pressure level in the low in frequency response range. The 504c is definitely the best all-around choice. We are providing a $100 gift card for a future purchase when you order one from us. If you are in the states, shoot us an email at Divineavinc@gmail
And we'd be happy to help you out with the other unit. Keep in mind that the 504c is backordered for the next couple of weeks. Thanks my friend and take care
I have a simalar setup with the RP-6000F for L&R, the RP-600C as center hooked up to a Denon X3400H. I use jbl northridge e80 as my surrounds and I'm thinking about replacing them with RP-502S or RP-600M. Is it worth the upgrade and wich one should I use?
@@brng1755 Based on my research RP404C would better match with RP6000F and the same concept for RP504C with RP8000F. One thing that you need to consider is the size of RP504C and if you can fit that into your TV entertainment unit. As said, you wouldn't go wrong with either of them and RP504 is a brilliant centre speaker for the price.
I hated center channels up until I ran across one of these. Changed me on the spot. Just don't know if it was the top or 2nd. I'd LOVE to have the 3rd but...
thanks good demo
Thank you
Merci vraiment flagrant 👍👍
Great Video, I sure would like to see a comparison between the PR-500C and the PR-504C
I think a 600c would be more properly paired up against it. 404 vs 500c would be a good one. We will make more videos soon
Thanks for the comparison, guys! I currently have the RP-250c as our center channel in a 5.1 System. Would there be much of a difference in upgrading to the 504c?
I made that upgrade. It comes down to how picky and sensitive you are to the differences. A regular person will never know the difference. Where as a person that knows what to look for in sound quality will be satisfied (not blown away) with the upgrade.
Hi Dude, I have a Denon x3600H 9.2 Av receiver. So can you suggest me the low budget speaker system. How many speakers doses it need ? Which is better Klipsch or Polk audio? Thank you.
Hey boss, Klipsch for sure because they are easier to drive. Your receiver doesn't put out a ton of RMS power so we don't want a speaker thats hard to drive.
404c, 6000fs, in wall or on wall surrounds. Spl120. Feel free to reach out. If we get a few pics of the space, we can evaluate it and help select the best configuration. 7-9 channels depending on the space and budget. We have the best prices and free shipping in the states. Divineavinc@gmail.com. Thanks boss
Thank you so much ❤️
That is a great viedo which made my decision easier.
I have been using below listed set from Costco. I want to replace my center R-52C with RP-504C. Could you please confirm if this combination will work fine? Thank you in advance.
Rock on my brother, yeah that combination will work well. Feel free to reach out if you’d like us to get you a quote divineavinc@gmail
What about the RP-600C going with the RP-600M l?
Can you do similiar comparison but between rp500c and rp504c?
can 504 be driven by 100 watt per channel AVR?
Very helpful video. Not enough center channel content out there. I would also like to see some of these compared with a subwoofer in the mix to give us an idea of how these shine with the low range taken care of, as they will be in most home theater applications.
Yeah we can probably do some 3.1 comparisons at some point. With stereo microphones and the majority of people using their phones to watch these videos, it's a little hard to depict the true capabilities of these systems. Also CZcams does quite a bit of compression. We do have some other comparisons planned. Thanks for watching, my friend
@@DivineAV Sweet Jesus that response was fast. You guys are home theater ninjas.
I have a feeling if you measured the 404/504C's, you'll see a dip in the frequency response in the mid-bass and a rise in the treble. The RC-64III sounds like it has a flatter response from the low mids to the treble.
That's actually quite accurate. We deliberately removed all calibration from our receiver in order to get the most fair comparison. We calibrate every single DAV install and generally have to work on the mid-range frequency quite a bit to get the 404-504 to sound more balanced. The good thing is, when using something like a Yamaha 2080, we are able to pull those frequencies up and the speakers both respond brilliantly to those adjustments. Most of the Klipsch products and especially the rc64iii have a spike in the 8 to 12 K range. We usually let that fly because it creates that sense of clarity with glass breaking etc. The rc64iii without a doubt has a better balanced full range of sound. Thanks for watching and we always appreciate your input.
I currently have the RP-450C powered by the Parasound A52+. I still find it hard to hear the dialog at times while watching movies. If I have the RP-160M L,R"s, would it be OK to upgrade the center channel to the RC-64 III?
Well its not your speaker. Some movies are naturally mixed with low dialog . Every movie studio do things differently . All you have to do turn up the gain for your center channel through your avr.
thanks for the nice review .... now i know which i gonna buy....thanks for help..... i think it will be the 504c ....
Thanks for watching, feel free to send us an email if you'd like to get a quote from us. If you're in the US.
Divineavinc@gmail
I’m looking for center speaker which is 404C or 500C to pair with RP-600M. Just a small room. Which one is the best?
Thanks
Both good units and pair nicely with the 600 m. The 404 has more midbass but they both hit about the same sound pressure level. We'd be happy to get you the best price and free shipping if you're in the states. Send us an email at Divineavinc@gmail to place an order. Thanks
RP 504c- my choice and its just awesome!
Excellent Video best overall.
If I do not have a klipsch system, would this work to mix with my system looking at timbre matching? For a small room size of 115 sq ft, which one would work looking at voice clarity the most, driven by a Denon 1610 5.1 AVR?
That all depends on the type of speaker that you’re trying to mix it with. The 1610 should do a decent job with the 504 or lower.
Feel free to email divineavinc@gmail if you need a quote. If you buy the product from us and you need some assistance during Calibration, you can always send us an email or text and we’d be happy to help you out.
@@DivineAV thank you. Honestly I love my Kenwood 5.0 system, the towers are huge and powerful. I'm pretty happy with the centre channel BUT always love to tweak! Hence was looking at the klipsch if it would integrate with the rest of my system.
Great comparison. Tons of difference over a good set of headphones.
Do you deal beyond Klipsch? I’d love to see this same comparison, adding in soft dome tweeter options to compare to the horn loaded/compression driver options.
Thanks. Yes, we sell Martin Logan, KEF and a few others. We just prefer the Klipsch sound. We will get some other comparisons going soon. Thanks for watching
Divine AV Home Theater can i ask why you prefer the klipsch over other top quality audio brands?
@@poinkwagner Hey Paul, it's not necessarily that we prefer Klipsch in general, it's that we prefer certain products in their lineup. Their mid-to-high range products in the Reference Premiere and THX Ultra Series lineups are some of the most reliable and premium sounding speakers on the planet for the money. It's exceedingly hard to beat the "bang for the buck" that these products provide. Full range of sound, balance among the entire audio Spectrum, and unparalleled reliability. My brother and I both have them in our own homes and we have grown to trust and believe in the brand throughout the years of offering their products. Martin Logan and KEF also make good products and we support them when people request those units specifically. Thanks for the great question and we appreciate you watching
Great comparison! Wondering if these would match a tower speaker as a centre channel speaker? If space is not a constraint, would you prefer a tower speaker ?
Yes if you could do three tower speakers that would be ideal but if you’re talking about mixing a different type of tower, I would prefer one of these units because they are a bit more dynamic in the mid range
did u guys ever do the part 2 on this? thanks
I just ordered a BDI Element media center, depth dimensions are 15.75, looks like the 504 is 14.46 deep. Cutting it super close so may need the 404. Do you happen to have an opinion? I can't tell if the binding posts are recessed or if they stick out...
Just realized I could go with Spades and that might do the trick but still curious for your opinion. Thanks in advance!
That thing looks pretty cool, honestly there's no way of really knowing. The 404 would be a safe bet of-course. But the 504 should fit and you could always cut out a little section of the back if necessary. Another really good option that will definitely fit in there would be the 600c. It has a nice mid-range and is a pretty full overall sounding speaker. I think all three of those units are on backorder but I would get the cabinet first take some precise measurements and then shoot me an email at Divineavinc@gmail and we will see if we can get you the best price on a center. Thanks for watching
@@MichaelGreco yeah that's the other option, but the element looks really cool
Would you be able to do a comparison with the Klispch RP504c and the Martin Logan Motion 30i and 50XTi
Will do
Hey guys great video! I’m curious of your opinion on how the RP-500c II compares to like the 504. I’d love to see a comparison I can’t seem to find any comparison videos anywhere!
Thanks! We will try to see if if we can make some time to do that video. The 504 has a bit fuller mid range. Other than that they sound pretty similar.
Thanks for the quick response! In your opinion which would be better paired with RP-5000f IIs? Would the 504 overpower or would the 500 be too little? Thanks!
@@champion68 the bigger the better. Keep in mind that a speaker is a speaker so the 5000 is huge even when compared to the 504 C.
The ideal set up would be three of the same tower speaker, but that’s usually not very practical.
Feel free to reach out whenever you’re ready. We have free shipping and can help you with anything you need. Thanks buddy Divineavinc@gmail.com
I'm extremely interested in getting the 504 c, I just started building my home theater
It's a very solid unit. One of the best centers in my opinion
@@DivineAV i see you have a promotion, im wanting to buy this model and take advantage of your offer, will you message me info on how to do that?
@@kevinpedigo433 hey boss, yes if you're in the United States the offer is valid. Please shoot me a email at Divineavinc@gmail with your order request details and address. Thanks buddy.
Warren
Advise please, currently RP-260F front and RP-440C. Plan to change my center to RP-450c, do you think still match or maybe it will overcome my front?
It will match but that was discontinued a very long time ago. Consider the 504c. If you're in the states, shoot us an email and we will get you a price. We just need your ZIP code for a quote.
Divineavinc@gmail
@@DivineAV I sent you email. Thank you
I want a RC-64iii, but I have it's little brother the RC-62ii I love it! Have you guy's ever heard one? I got my RC-62ii for $350 in 2015. Is the RC-64iii ported? My RC-62ii has 2 front ports. It delivers pretty impressive bass for a center channel speaker.
Is a NAD T778 enough to power the RC64 III and two RF7 IIIs alone in a 3.1 setup? Or do I really need to get a separate amp?
I believe you should be good with the NAD. I was running the RF 7 III's off my AVR (as a 7.1.2) setup, but recently added a 140w (all channel) 3ch amp for the RF7's and the RP504c and There is not as much of a difference. The Speakers are extremely sensitive so it takes a whole lot less power to drive them compared to other less sensitive speakers. I do notice it gets louder at lower volume compared to just the AVR, if that matters at all.
@@darkshadoku Thanks!
Omfg great demo everyone
is the 450c a good one
Guys great comparisons:center speaker recommdation for klipsch RB61-11'S?
Hey buddy, I'd recommend the 400 or 500C by Klipsch. Let me know if you need us to get one for you.
I already own a Klipsch RP-504C powered by Marantz SR 8012, Do you think it would be worth upgrading to Klipsch RC-64III and one more thing do you think can I manage to Power the RC-64III with Marantz SR 8012 without separates. Kindly advise.
Hey boss, you receiver will put out roughly 90 Watts RMS @ .1 THD with 7 channels driven. This is a real world estimate regardless of what the manufacturer states. That is definitely enough to power the 504c quite well and it will definitely do a decent job with the rc64iii. It would be lacking a little bit in the bass range but still more than sufficient. You could eventually add an external amplifier and power that baby up. Feel free to shoot us an email if you have any other questions or if you'd like to purchase the rc64iii. Free shipping and for providing $150 gift card for future purchases. Divineavinc@gmail.
Thanks for watching
@@DivineAV Thanks for the swift reply.
@@rajuisback1 you're welcome
no, I would go the other way, If you do buy them let me if you like them?
@@musicstevecom2 definitely.
Awesome demo but I'm am wondering how much of the difference is due to the distance to the mic and the off axis effect?
It was an Omni directional mic, and we had it about 3 feet away so it shouldn’t make a significant difference. But I can tell you that as you step up in the models, there’s definite improvement
This is handsome.
It will be fine if you can campare the PR-504c with a comparable SVS centre-chanel.
Nice review. :) I cant decide between the RP-600C and RP-404C. Which one to choose?
Defintly the 600c! Listened to both next to each other. The 600c also bload the 504c completely away
Hay guys I'm from India I like all u r video's.. u guys doing great..
Hi buddy! Thanks for commenting! I'm glad you're enjoying our videos. We have many clients here in Texas who came from India. Such good people. Take care brother.
@@DivineAV Thank you bro.. I'm a big fan of Klipsch speakers... Take care of u all guys ✌️✌️..
Whats the sound track thats playing on this video?