Oh, man. That was the color combination I have been looking for! Thank you so much for the information! I've watched a dozen videos on ebike throttle wiring, and your system finally matched mine!
Very helpful Thanks! I have that same kit and controller but gave my original twist throttle away and was trying to hook up a new three wire throttle with voltage display and was wondering if the yellow, green and brown wires from the controller need to be connected to something?
WHAATTT SPEAK UPPP! Searously I have everything turned up and im shoving my headphones into my head and i still cant understand what you saying. people want to know where the thumbs down comes from... Well heres one.
Good grief who are the five thumbs down You want it installed too. Wow Yes I could been more clear but he still has done video number 5 good grief. I’d be happy if half the videos I watched hat a sheet to copy. Thank you 😊 🙏
Thank you so much , I thought I killed my controller but since I was able to fix it by buying a new throttle and wiring it up with these instructions I get to send back the controller I bought extra . BTW the extra green wire i had is either a ground or a speed signal 🤔
Hi, could you help me with my set up? I have the twist throttle version, but same 5 wire throttle and 6 wire throttle violamart controller. I hooked up everything like you did, but I'm getting zero response from the throttle. Motor is receiving power thoughtl.
Hi, I have a vitesse stream e bike , I’ve looked in the electrics in the frame but there’s no spare connector there for a throttle, any ideas on how to get round this problem? Thank you,
hi there, so this right here can convert if you have a 6pin throddle connector on your controller box into a 6 pin. That's what you're showing us. For the Throttle hout 3 pin controller box what then
The wires coming from my control is 5 wires..yellow,blue,red,black and white..the wires on my new twist throttle is red,black and white..I'll match them up and leave the yellow and blue and see if that would work for me..by the way good explanation tho..
Maybe you can help me. My controller has 4 wires for the throttle orange, red, white, black. I have a throttle that is 3 wires red black and green. How do I make this work?
Volume too low! Hooked up exactly as stated in video. DID NOT WORK! Any additional thoughts? Thumb throttle with on/off and LCD display, RED, BLACK, GREEN, YELLOW, BLUE. Controller available wires, RED, BLACK, GREEN, YELLOW, WHITE, BROWN. 1000W 48 Volt Brushless Controller. Please comment ONLY if you know which combination works! Thanks! MarkMannM2
I got the same thumb throttle but I got a wire blow out. I connect the throttle Yellow wire to the 48V battery + and connect the blue wire 48V negative. I turn the ON/OFF to on and I see the voltage on thge LCD screen a quick second the the yellow wire got burned out caused a big spark scared the crap out of me. I now left out the yellow and green wire. I now only use the throttle. Maybe the tiny yellow wire can not handle the voltage?
Hi I've broke my throttle and need the power button colour please pedal assist not working without turning I have 6 wires witch two is the power please and can I just twist together .
The three wires are the only ones you need if you want to just wire it up, the other two are for showing battery power and use the key lock, but if you just want a throttle the three little wires are all you need to connect.
Hola mi nombre es paulo capilla, amigo ayúdame con un controlador cepillado d 30 vts 500w 28 A. de la marca XUN. No se como conectar este aparato, en el acelerador con llave de contacto, este acelerador tiene 5 cables (En el enchufe del acelerador: verde, negro y rojo) (separador: 2 hilos; amarillo y azul.) Este acelerador tiene llave de moto e indicador de batería. en el controlador del cepillo hay un enchufe blanco escrito: (desviador) en los colores verde, rojo y negro, ya se que es el acelerador pero y los dos cables amarillo y azul???? ¿dónde puedo enchufarlo?Tenemos dos cables azules en un enchufe blanco con candado escrito dos cables azules con candado escrito; ¿Para qué son estos dos cables?
Hello my name is Paulo chapel, friend help me with a brushed controller d 30 vts 500w 28 A. of the brand XUN. I don't know how to connect this device, on the accelerator with a contact key, this accelerator has 5 wires (On Throttle Socket: Green, Black and Red) (separator: 2 wires; Yellow and blue.) This throttle has a motorcycle key and battery indicator. on the brush controller there is a white socket written: (Derailleur) in the colors green red and preto. I already know it's the accelerator but what about the two yellow and blue wires???? where can i plug it in?? we have two blue wires in a white socket written lock two blue wires written lock; what are these two wires for?
Im in a similar situation but mine is reversed. I have a 6 wire throttle with a 5 wire control, after trial and error I got so confused lol can someone help
I realized it didn't show much. What info can you gather NONE $1 ALARM SAME. 2 Less wires. Some need it I'm not criticizing just not for me KISS IF U DONT KNOW THE MEANING LOL. ALLthe geniuses. Invent a replacement for hall sensor. Technically. 4 components could be made foolproof
This is the first video that shows and explains how to connect 6-wire controller to 5-wire throttle. It was immensely helpful to me. Thanks much!
Gadget Caches Glad my video was helpful.
The last wire is the speed wire
Oh, man. That was the color combination I have been looking for! Thank you so much for the information! I've watched a dozen videos on ebike throttle wiring, and your system finally matched mine!
Awesome! Exactly the same setup that I have. Boy did you save me a bunch of work! Thanks big time!
Very helpful Thanks! I have that same kit and controller but gave my original twist throttle away and was trying to hook up a new three wire throttle with voltage display and was wondering if the yellow, green and brown wires from the controller need to be connected to something?
WHAATTT SPEAK UPPP! Searously I have everything turned up and im shoving my headphones into my head and i still cant understand what you saying. people want to know where the thumbs down comes from... Well heres one.
Exactly
I can understand and hear everything. I must have super ears
I could hear him pretty good too
Nice, I love building these bikes
Good grief who are the five thumbs down
You want it installed too. Wow
Yes I could been more clear but he still has done video number 5 good grief.
I’d be happy if half the videos I watched hat a sheet to copy. Thank you 😊
🙏
Awesome vid! Very helpful, thank you.
Thx man I gotta new thumb throttle with a key and I was curious about how I wire this up u r very helpful
Thanks ! helped me solve which wires to combine from controller (yellow + green) u da man !
Thank you so much , I thought I killed my controller but since I was able to fix it by buying a new throttle and wiring it up with these instructions I get to send back the controller I bought extra .
BTW the extra green wire i had is either a ground or a speed signal 🤔
want to say thanks, really needed this info
Thanks so much this is what I needed saved me a good bit of time merry Christmas
I just needed to thank you for your help your the only video I can actually understand so thank you so much for your help?
Thank you a TON!!!!!!!
Hi, could you help me with my set up? I have the twist throttle version, but same 5 wire throttle and 6 wire throttle violamart controller. I hooked up everything like you did, but I'm getting zero response from the throttle. Motor is receiving power thoughtl.
Whats with the top knots,do you get an expensive small coffee and half mast pants with each kit too lol....great video great product.
Hi, I have a vitesse stream e bike , I’ve looked in the electrics in the frame but there’s no spare connector there for a throttle, any ideas on how to get round this problem? Thank you,
hi there, so this right here can convert if you have a 6pin throddle connector on your controller box into a 6 pin. That's what you're showing us.
For the Throttle hout 3 pin controller box what then
big help - many thanks
The wires coming from my control is 5 wires..yellow,blue,red,black and white..the wires on my new twist throttle is red,black and white..I'll match them up and leave the yellow and blue and see if that would work for me..by the way good explanation tho..
Maybe you can help me. My controller has 4 wires for the throttle orange, red, white, black. I have a throttle that is 3 wires red black and green. How do I make this work?
Volume too low! Hooked up exactly as stated in video. DID NOT WORK! Any additional thoughts? Thumb throttle with on/off and LCD display, RED, BLACK, GREEN, YELLOW, BLUE. Controller available wires, RED, BLACK, GREEN, YELLOW, WHITE, BROWN. 1000W 48 Volt Brushless Controller. Please comment ONLY if you know which combination works! Thanks! MarkMannM2
I got the same thumb throttle but I got a wire blow out. I connect the throttle Yellow wire to the 48V battery + and connect the blue wire 48V negative. I turn the ON/OFF to on and I see the voltage on thge LCD screen a quick second the the yellow wire got burned out caused a big spark scared the crap out of me. I now left out the yellow and green wire. I now only use the throttle. Maybe the tiny yellow wire can not handle the voltage?
MichaelToys Were
you replacing the “twist throttle” with the thumb throttle?
@@franforth no. just a thumb throttle replacement. The old thumb throttle do not have voltage display.
@@franforth did you connect your yellow and blue wire to the battery positive and negative ?
I used this thumb throttle for a modified razor ground force go kart. czcams.com/video/BhrOZUEQw8Q/video.html
Are you adding the thumb throttle to a Voilamart controller? My wiring diagram is for a voilamart controller.
Hmm i have a 1500w voilamart, and seems like the throttle isn't working. Everything else works though, any ideas? Thanks!
If you don’t have an Ebike component tester their are several videos showing how to use a multimeter to test the throttle.
Me too I was silly I'm back to regular throttle. Got enough greif
Hi, I did the exact same thing. All is working except the power switch is always on. Any idea?
switch blue and yellow and the power switch works fine
How do you short circuit gnd and K2 so I can get full speed that's what the company said
Hi I've broke my throttle and need the power button colour please pedal assist not working without turning I have 6 wires witch two is the power please and can I just twist together .
The three wires are the only ones you need if you want to just wire it up, the other two are for showing battery power and use the key lock, but if you just want a throttle the three little wires are all you need to connect.
But when you squeeze the brake and release would the throttle engage by itself?
yup green to white sounds pretty straight forward, lol
Id live for a link to this thumb throttle
Hola mi nombre es paulo capilla, amigo ayúdame con un controlador cepillado d 30 vts 500w 28 A. de la marca XUN.
No se como conectar este aparato, en el acelerador con llave de contacto, este acelerador tiene 5 cables
(En el enchufe del acelerador: verde, negro y rojo)
(separador: 2 hilos; amarillo y azul.) Este acelerador tiene llave de moto e indicador de batería.
en el controlador del cepillo hay un enchufe blanco escrito: (desviador) en los colores verde, rojo y negro, ya se que es el acelerador pero y los dos cables amarillo y azul????
¿dónde puedo enchufarlo?Tenemos dos cables azules en un enchufe blanco con candado escrito dos cables azules con candado escrito; ¿Para qué son estos dos cables?
Hello my name is Paulo chapel, friend help me with a brushed controller d 30 vts 500w 28 A. of the brand XUN.
I don't know how to connect this device, on the accelerator with a contact key, this accelerator has 5 wires
(On Throttle Socket: Green, Black and Red)
(separator: 2 wires; Yellow and blue.) This throttle has a motorcycle key and battery indicator.
on the brush controller there is a white socket written: (Derailleur) in the colors green red and preto. I already know it's the accelerator but what about the two yellow and blue wires????
where can i plug it in?? we have two blue wires in a white socket written lock two blue wires written lock; what are these two wires for?
I'll say what we feel the manufacturer didn't do anyone any favors by Not separating functions. ALL the cheap controllers EZPZ
I have 6 wire connector but the colours are red black green red orange blue.....
All I get digital No throttle. Getting priorities in order. I wanted a key I wanted digital. Be careful wants VS needs. Have fun
And tiny alarms
Im in a similar situation but mine is reversed. I have a 6 wire throttle with a 5 wire control, after trial and error I got so confused lol can someone help
My advice buy cheap controllers. Manufacturer harness sucks. Give me 20 wires BS
I can't here ya
what about a 6 wire throttle to a 5 wire CONTROLLER??? no f' n help ANYWHERE online. WTF IS THAT???
I wanted voltage display I grew up quick NOPE all I need is throttle. I. Don't use BMS anyway. Hobby charger I know at all times my status FIN
Musk put it best Cars are the way Not planes and bikes well its a bike. Either way Lol
I realized it didn't show much. What info can you gather NONE $1 ALARM SAME. 2 Less wires. Some need it I'm not criticizing just not for me KISS IF U DONT KNOW THE MEANING LOL. ALLthe geniuses. Invent a replacement for hall sensor. Technically. 4 components could be made foolproof